Adapters
- Home /
- Mechanical Accessories /
- Adapters
Adapters
When it comes to customizing, connecting and fine-tuning of telescope components, adapters come into play. In this important group of accessories you will find your adaptation for your application.
The digiscoping adapter BW-T2 allows attaching of cameras to BW spotting scopes from TS Optics.
- Suitable for, amongst others, all older TS BW spotting scopes, and also to all eyepieces with 37 mm connection thread
- Easy adaption - instead of the eyecup, the adapter is screwed to the eyepiece
- Suitable for SLR, mirrorless system cameras and also cameras with fixed lenses
- Connection adapters can be found in the "recommended accessories" section below
19.00 €
Estimated delivery time : 1-4 days
This adaptor screws directly into the Canon EOS body and enables you to connect objectives and adapters with M48 (M48x0,75) 2" filter thread.
39.00 €
Estimated delivery time : 1-4 days
The adapter accepts 2" filters, enables a quick coupling and 360° rotation and adapts from M48x0.75 to T2 - with only 19 mm length
69.00 €
Estimated delivery time : 1-4 days
The adapter ROT1 accepts 2" filters, enables a quick coupling and 360° rotation - the adapter has T2 threads on both sides
79.90 €
Estimated delivery time : 1-4 days
Precise locking ring for 2" eyepieces and adapter for pushing onto the barrel.
- Precise locking by two screws
- For fixing or calibrating of the plug-in depth of 2" eyepieces or adapters - for example if you want identical focus positions.
- Prevents from tilting through the safety notch when using compression rings.
- Can also be used for making a calibration eyepiece for astrophotography.
14.90 €
Estimated delivery time : 1-4 days
![Picture of TS-Optics adjusting ring 3 inch - counter ring for 3" correctors for precise stop](https://www.apm-telescopes.net/images/thumbs/0574586_3zkonter-konterring-3inch-1000_640.jpg "Show details for TS-Optics adjusting ring 3 inch - counter ring for 3" correctors for precise stop")
Precise stop ring for 3" receptacles, for example for correctors in astrophotography
Fixation with three M4 grub screws For reproducible focus position of 3" correctors on focusers with 3" clamping Simply slide over the 3" sleeve of the corrector and clamp
59.00 €
Estimated delivery time : 1-4 days
The adapter allows the safe connection of cameras to Expanse eyepieces from Teleskop-Service and to Baader Hyperion or Morpheus eyepieces.
19.00 €
Estimated delivery time : 1-4 days
TS-Optics T2 Adapter for Hyperion, Morpheus and Expanse Eyepieces - long Version
The adapter allows connecting T2 rings for (D)SLR cameras for eyepiece projection eyepieces with the M43 thread
The adapter allows connecting T2 rings for (D)SLR cameras for eyepiece projection eyepieces with the M43 thread
Connection at eyepiece side: M43 thread, female Connection at camera side: T2 (M42x0.75) thread, male For the classic eyepiece projection with single-lens reflex cameras Length 25 mm for better illumination and a better magnification factor
36.80 €
Estimated delivery time : 3-4 days
TS Optics Direct T2 Connection for 1.25" eyepieces for eyepiece projection or adaption of a digital camera to the eyepiece
19.00 €
Estimated delivery time : 1-4 days
This T2 extensions has a male T-thread on one and a female T-thread on the other side.
18.00 €
Estimated delivery time : 1-4 days
This adaptor allows you to connect your Canon EOS camera to a telescope or spotting scope.
24.00 €
Estimated delivery time : 1-4 days
Connector socket extension by 25 mm for cameras and eyepieces
23.00 €
Estimated delivery time : 1-4 days
Eyepiece adapter 42 mm to 50.8 mm
42.00 €
Estimated delivery time : 3-4 days
The Vixen 60-50.8mm Adapter Sleeve adapts the 60 mm port of the Vixen focuser to 50.8 mm eyepiece port
41.00 €
Estimated delivery time : 3-4 days
VIXEN WIDE PHOTO ADAPTER CANON
52.00 €
Estimated delivery time : 3-4 days
VIXEN WIDE PHOTO ADAPTER GENERAL TYP
52.00 €
Estimated delivery time : 3-4 days
The Vixen SX 60 mm to 50.8 mm adapter sleeve is screwed onto the thread of the 60 mm focuser and adapts so to 50.8 mm 2 inch extension tube
33.00 €
Estimated delivery time : 3-4 days
William Optics- 2-1.25 ROTOLOCK VISUAL BACK ADAPTER
69.00 €
Estimated delivery time : 1 week
William Optics Adapter M54x0.75 - Flattener 68III/7A
69.00 €
Estimated delivery time : 1 week
William Optics Adapter M68x1 - Flattener 68III/7A
69.00 €
Estimated delivery time : 1 week
![Picture of Camera Angle Rotator for 2.5" M63 Focuser](https://www.apm-telescopes.net/images/thumbs/0439097_caa63_640.jpg "Show details for Camera Angle Rotator for 2.5" M63 Focuser")
All New Camera Angle Rotator for 2.5" M63 Focuser
Fits :
Fits :
Z73, Z103, Z126, GT71, new 2018 GT81 and all other brand Focuser with M63 threads.
149.00 €
Estimated delivery time : 1 week
The adapter allows mounting of Canon EOS camera lenses to ZWO ASI cooled cameras.
59.00 €
Estimated delivery time : 1-4 days
The adapter allows mounting of Canon EOS camera lenses to ZWO ASI cooled cameras.
84.00 €
Estimated delivery time : 1-4 days
