Altair Astro
Altair Astro manufacturer of high quality astronomical accessories
Manufacturer in England of high quality accessories and distribution of CCD cameras. APM is a partially authorized dealer for Germany.
Feature summary Altair 662C CMOS Camera:
- IMX662 Colour CMOS Sensor with on-chip HGC, LCG and HDR Support
- Resolution: 1920 x 1080
- 2.9 um Square Pixels
- 1/2.8-inch Optical Format
- 12-bit ADC
- 512 Mbyte Memory
- G Sensitivity: 5612mv with 1/30s
- Low Noise: 0.46 to 5.35e-
- High Frame Rate 47 FPS 8 bit
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
305.00 €
Estimated delivery time : 3-4 weeks
Feature summary GPCAM3 462C:
- 1920 x 1080 Resolution
- 2.9 um Square Pixels
- 1/2.8-inch sensor format
- 5.57mm x 3.13mm sensor size
- Low Read Noise: 0.49 to 2.1e-
- High Frame Rate 152 FPS 8 bit
- 12-bit ADC
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
299.00 €
Estimated delivery time : 3-4 weeks
Feature summary Altair 2210C CMOS Camera:
- SC 2210 Colour CMOS Sensor
- 1920 x 1080 pixel resolution:
- 4 um Square Pixels
- 1/1.8-inch Optical Format
- 12-bit ADC
- 512mb DDR3 Memory
- G Sensitivity: 20100mv/lux*s
- Low Noise: : 0.47 to 3.2e-
- Fast Frame Rate 50 FPS in 8bit mode
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
479.00 €
Estimated delivery time : 3-4 weeks
Feature summary Altair Hypercam 585C CMOS Camera:
- TEC cooling with heatsink for extra low noise
- On board temperature sensor for perfect dark frame calibration.
- 5A 12v DC Power supply included, with 110-240v input.
- IMX585 Colour 8.3mp Starvis 2 Back Illuminated CMOS Sensor
- On-chip HGC, LCG and HDR Support
- 3840 x 2160 pixel resolution
- 2.9 um Square Pixels
- 1/1.2-inch Optical Format
- Sensor size: 11.14 x 6.26 mm (12.85mm Diagonal)
- 12-bit ADC (with 16bit output in HDR mode)
- 512Mbyte DDR3 Memory buffer
- Low Noise: 0.65 to 0.5e- in HCG mode
- Fast Frame Rate 47 FPS in 8bit mode
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
799.00 €
Estimated delivery time : 3-4 weeks
Feature summary Altair 2210M CMOS Camera:
- SC 2210 Mono CMOS Sensor
- 1920 x 1080 pixel resolution:
- 4 um Square Pixels
- 1/1.8-inch Optical Format
- 12-bit ADC
- 512mb DDR3 Memory
- G Sensitivity: 20100mv/lux*s
- Low Noise: : 0.47 to 3.2e-
- Fast Frame Rate 50 FPS in 8bit mode
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
479.00 €
Estimated delivery time : 3-4 weeks
Feature summary GPCAM3 462C:
- 1920 x 1080 Resolution
- 2.9 um Square Pixels
- 1/2.8-inch sensor format
- 5.57mm x 3.13mm sensor size
- Low Read Noise: 0.49 to 2.1e-
- High Frame Rate 152 FPS 8 bit
- 12-bit ADC
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
349.00 €
Estimated delivery time : 3-4 weeks
Feature summary GPCAM3 462M:
- 1920 x 1080 Resolution
- 2.9 um Square Pixels
- 1/2.8-inch sensor format
- 5.57mm x 3.13mm sensor size
- Low Read Noise: 0.49 to 2.1e-
- High Frame Rate 152 FPS 8 bit
- 12-bit ADC
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
299.00 €
Estimated delivery time : 3-4 weeks
Feature summary Altair Hypercam 585C CMOS Camera:
- 5A 12v DC Power supply included, with 110-240v input.
- IMX585 Colour 8.3mp Starvis 2 Back Illuminated CMOS Sensor
- On-chip HGC, LCG and HDR Support
- 3840 x 2160 pixel resolution
- 2.9 um Square Pixels
- 1/1.2-inch Optical Format
- Sensor size: 11.14 x 6.26 mm (12.85mm Diagonal)
- 12-bit ADC (with 16bit output in HDR mode)
- 512Mbyte DDR3 Memory buffer
- Low Noise: 0.65 to 0.5e- in HCG mode
- Fast Frame Rate 47 FPS in 8bit mode
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
579.00 €
Estimated delivery time : 3-4 weeks
Hypercam AA533MTEC headlines:
- 9-megapixel Sony IMX533 back-illuminated sensor with 16mm diagonal
- 14bit ADC delivers 16,384 grey levels in the image
- Zero Amp Glow even at 10 minutes exposure
- Special Ultra Low Read Noise mode
- True hardware binning
- 2 stage TEC cooling
- Heated optical window
- 2 year warranty, with no sensor freeze guarantee**.
- USB3.0/USB2.0 connection with rear USB2.0 hub (2x ports)
- 12V power is required to operate this camera.
- Armoured case included
- Supplied basic 240~110v compatible 12v DC power supply with choice of UK, USA or EU plug
- Software & drivers downloadable from www.altairastro.help
1349.00 €
Estimated delivery time : 3-4 weeks
The new TriBand V2 Filter
- Anti-Halo coating on both surfaces to reduce reflection artefacts from reducers and camera lenses.
- Increased blocking of UV, IR and unwanted visual range wavelengths. UV OD7 (T0.00001%) Visual OD5 (T0.001%) and IR OD4 (T0.01%) for the ultimate in skyglow blocking. This is an order of magnitude better than foreign filters.
- Higher transmission % of desired wavelengths Ttop 93% (Average 5% higher transmission of target wavelengths than V1). In general a 5% gain on foreign filters.
- Ha at 14nm and Oiii at 34nm FWHM for with less tail-off to reduce unwanted light pollution, whilst keeping transmission high compared to the V1.
159.00 €
Estimated delivery time : 1 week
The Altair Dichroic Solar Energy Rejection Filter or D-ERF protects your telescope and solar imaging equipment from excessive heat build-up when solar imaging or observing with your Daystar Hydrogen Alpha Quark, or other Hydrogen Alpha Etalon filters. Now you can save money by combining Hydrogen Alpha, Calcium K-Line and Calcium H-Line in one TRIBAND pre-filter.
Product Features:
- Reduces approx. 98% of heat reaching the optics to keep Etalon from drifting off-band and protect your equipment.
- 30nm FHWM Bandpass at H-alpha (H) wavelength of 656.28 nm (Full Width Half Minimum) Transmission: ~95.5%
- 40nm FHWM Bandpass with CWL at 395nm covering Calcium H-Line and Calcium K-Line wavelengths. Transmission: ~90.5%
- UVIR blocking OD3 0.1% @400-1100nm blocking over 98% of heat to your 3rd party Etalon at eyepiece or camera end, E.g. Daystar Quark). Please note it's your responsibility to use a proper commercial Etalon with this product, and to follow the manufacturer's instructions.
- Visible light blocking: OD4 0.01% @400-700nm to reduce reflection effects and over 98% of heat.
- Diameter 120mm Thickness 12.0mm (required to achieve surface precision)
- Multilayer coatings with SiO2 protective overcoat.
- ERF Holder cell included with soft tip threaded knobs. Tough and very light, easy to disassemble for cleaning the filter with optical wipes. Cell does not put any tension on the optics.
832.00 €
Estimated delivery time : 1 week
The Altair Dichroic Solar Energy Rejection Filter or D-ERF protects your telescope and solar imaging equipment from excessive heat build-up when solar imaging or observing with your Daystar Hydrogen Alpha Quark, or other Hydrogen Alpha Etalon filters.
756.00 €
Estimated delivery time : 1-2 weeks
