Altair Astro

Altair 130mm Aperture Energy Rejection filter - Ha Hydrogen Alpha only D-ERF for 5" Refractors

Product Features:

• Reduces approx. 98% of heat reaching the optics to keep Etalon from drifting off-band and protect your equipment.
• 30-40nm FHWM Bandpass at H-alpha (H) wavelength of 656.28 nm (Full Width Half Minimum) Transmission: ~90%
• UVIR blocking OD3 0.1% @400-1100nm blocking over 98% of heat to your 3rd party Etalon at eyepiece or camera end, E.g. Daystar Quark). Please note it's your responsibility to use a proper commercial Etalon with this product, and to follow the manufacturer's instructions.
• Visible light blocking: OD4 0.01% @400-700nm to reduce reflection effects and over 98% of heat.
• Diameter 140mm Thickness 12.0mm 
• Multilayer coatings with SiO2 protective overcoat.
• ERF Holder cell included with soft tip threaded knobs. Tough and very light, easy to disassemble for cleaning the filter with optical wipes. Cell does not put any tension on the optics and will not scratch or damage your telescope. It also won't alter the balance as much as an aluminium cell.

Altair DualBand 6nm Filter Features:

• Capture the two main emission nebulae bands at the same time, whilst suppressing light pollution, moonlight, and airglow.
• Acquire more data in less time, opening up your imaging window, even into the summer months when it isn't quite dark.
• If you have the 6nm Ha/Sii Ultra filter and the Sii/Ha version, you can capture twice the Oiii data in each imaging session and combine them for true SHO Hubble style imaging with a colour camera!
• Extremely steep bandpass yields maximum contrast in extreme light pollution: 6nm FHWM centred on 500.7nm Oiii wavelength, and 5.5nm FHWM centred on the 656.28nm Ha wavelength.
• Halo suppression anti-reflective coating.
• Can be used with One Shot Colour (OSC) CMOS or mono astronomical cameras for luminance data.
• Includes UVIR blocking for both modified and un-modified DSLR cameras, plus an anti-reflection coating for the ultimate in contrast.
• Best performance at focal ratios at F4.8 or slower, however can be used as fast as F3.6, with minimal contrast impact (conservative estimate - faster may be possible). Like any dichroic filter, contrast increases as focal ratio number increases. More info about light pollution filter performance and focal ratio here.

Altair DualBand 4nm Filter Features:

• Capture the two main emission nebulae bands at the same time, whilst suppressing light pollution, moonlight, and airglow.
• More data in less time, opening up your imaging window, even into the summer months when it isn't quite dark yet. Capture twice the Oiii data, whilst obtaining Sii to complement the Altair Ha Oiii DualBand filter.
• Extremely steep bandpass yields maximum contrast in extreme light pollution: 4nm FHWM centred precisely on the target wavelengths.
• Can be used with One Shot Colour (OSC) CMOS or mono astronomical cameras for luminance data.
• Includes UVIR blocking for both modified and un-modified DSLR cameras, plus an anti-reflection coating for halo suppression. To see the AR coating in action, please see images demonstrating the same filter with and without the AR coating on the bright star, Capella in exactly the same conditions with the same settings.
• Best performance at focal ratios as fast as F4.8, with contrast increasing as focal ratio increases. More info about light pollution filter performance and focal ratio here.
• The 2" filter has standard M48x0.75mm thread, and fits inside the Altair Magnetic Filter holders, standard 2" filter wheels, plus the Altair Canon / Nikon DSLR lens to astro CMOS adaptors. 

Altair DualBand 6nm ULTRA Filter Features:

• Capture two main emission nebulae bands at the same time, per filter, whilst suppressing light pollution, moonlight, and airglow.
• Acquire more data in less time, opening up your imaging window, even into the summer months when it isn't quite dark.
• If you have the 6nm Sii Oiii Ultra filter and the Ha Oiii filter combo, you can capture twice the Oiii data in each imaging session and combine them for true SHO Hubble style imaging with a colour camera!
• Extremely steep bandpass yields maximum contrast in extreme light pollution: 6nm FHWM centred on 500.7nm Oiii wavelength, 5.5nm FHWM centred on the Sii and Ha wavelengths.
• Can be used with One Shot Colour (OSC) CMOS or mono astronomical cameras for luminance data.
• Includes UVIR blocking for both modified and un-modified DSLR cameras, plus an anti-reflection coating for the ultimate in contrast.
• Best performance at focal ratios at F4.8 or slower, however can be used as fast as F3.6, with minimal contrast impact (conservative estimate - faster may be possible). Like any dichroic filter, contrast increases as focal ratio number increases. More info about light pollution filter performance and focal ratio here.
• Available in 1.25" or 2" standard astronomy filter sizes. The filters have standard Astronomy compatible filter threads, and fit inside the Altair Magnetic Filter holders (with appropriate slider), and standard astronomy filter wheels. Choose the 2" version for use with the Altair Canon / Nikon DSLR lens to astro CMOS adaptors. For Hypercam 183C and 533C or 533M, 585C and smaller sensors choose the 1.25" filter. For larger sensors choose the 2" version.

High quality filter for CMOS photography with the following features:

• 1st band, CWL495nm FWHM35nm
• 2nd band, CWL 660nm FWHM 35nm
• 1mm thick optical glass with 30 arc sec parallelism.
• UVIR Block and Anti-Reflection Coating.