Astronomy

Astroadapter for TAL MT-S3 pinsize Ø 60 mm / 2.36" , length 20 mm / 0.78" threaded hole in the center with M10 secondary 3 threaded holes with M6 thread (screws included)

- Adjustable height, 12 settings from 10 to 93 cm - Wide back provides good spine support - Comfortable, slightly springy Wooden material - seat size 25 x 21 cm - Easily folded - Weight: 5.8 kg - Packaged size: 0.35 x 1.01 m - Maximum load 120 kg

- small and light azimuthal mount for binoculars, scopes teleskopes and cameras - the friction control can be tuned with easy to grasp knobs for both axes - incl. one Dovetail Clamp. - on the other side is thr possibility to connect a second Dovetail Clmap, Counterbalance Bar or a quick release coupling for a camera/ spotting scope - thread size 3/8", other on request - high 107 mm /4.2" - width 135 mm /5.3" - diameter on the tripodside 60 mm /2.3" - load capacity 5 kg (max. 7 Nm) with load on one side and 20 kg with load on both sides

Mit dieser verstellbaren Spreizsicherung können Sie die Beinspreizung Ihres Statives in drei festen Winkeln (bei ca. 24, 32° und 40°) sicher arretieren. Ein Nachinnenschwenken der Beine wird ebenso verhindert. Das Besondere einer variablen Spreizsicherung dabei ist, dass Sie von der minimalen bis zur maximalen Aufstellhöhe des Stativs nahezu immer das gleiche Beindreieck haben. Dies ermöglicht eine flexible Nutzung des Stativs mit verschiedenen Aufbauten. Diese Spreizsicherung wird für das Stativ Planet empfohlen. Die Bedienung erfolgt von der Unterseite. Ein leichter Druck auf den sogenannten Sperrtaster bei gleichzeitigem Ziehen (Winkelvergrößerung) oder Drücken (Winkelverkleinerung / Transportstellung) am Stativbein und Sie erreichen eine andere Winkelposition. Die Ablageplatte kann auf die Spreizsicherung aufgeschraubt werden.

- Smaller version of NIX II - Fully adjustable height from 25 to 75 cm - Easily folded - seat size 32 x 28 cm - Weight: 4 kg - Packaged size: 0.45 x 0.8 m - foot print size 45 x 67 cm - Maximum load 120 kg

- small and light azimuthal mount for binoculars, scopes teleskopes and cameras - the friction control can be tuned with easy to grasp knobs for both axes - incl. one Dovetail Clamp. - on the other side is thr possibility to connect a second Dovetail Clmap, Counterbalance Bar or a quick release coupling for a camera/ spotting scope - thread size 3/8", other on request - high 120 mm /4.7" - width 175 mm /6.9" - diameter on the tripodside 60 mm /2.3" - load capacity 8 kg (max. 12 Nm) with load on one side and 20 kg with load on both sides

- small and light azimuthal mount for binoculars, scopes teleskopes and cameras - the friction control can be tuned with easy to grasp knobs for both axes - incl. one Dovetail Clamp with shoe - on the other side is thr possibility to connect a second Dovetail Clmap, Counterbalance Bar or a quick release coupling for a camera/ spotting scope - thread size 3/8", other on request - high 120 mm /4.7" - width 175 mm /6.9" - diameter on the tripodside 60 mm /2.3" - load capacity 8 kg (12 Nm) on one side and 20 kg both sides

- fully adjustable height from 25 to 95 cm - easily folded - seat size 32 x 28 cm - packaged size 45 x 103 cm - maximum load 120 kg - foot print size 45x80 cm - foot rest (item no. 500686) available extra

Mounting head with spring-mounted fastening screw - 1/4" standard, 3/8" and 5/8" optional. Adjustable leg spread possible at an angle of about 20°, 40°, 60°, 80° and 100°. The deposit tray (27 cm) is included. The practical tray for small items fits between the tripod legs to provide extra stability. In connection with the Adapter recommended for Meade ETX-Astrotelescops.

Magnesium mounting head which is suitable for different mountigs. Please select yours and you see the price for this. The tripod has included a tray 27 cm and a spread stopper # 51008. You put the tray at the spread stopper and fix it with the black knob. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. The Astronomy-Tripods Report are with a spreader between the tripod legs and not with the adjuster for different angle as for the Photography-Tripods Report.