- Practical tray for small items, fits between the tripod legs to provide extra stability - A set of tripod leg brackets is also required for tray attachement purposes Material birch plywood, due to the nature of the material, color deviations may occur especially with color-stained plates.

The leg lock guarantees... - Rapid and equal leg spread - 100% secure assembly at all times:legs cannot slip away - No chain necessary - Triangular base form in seconds - Attention, legs are only able to lock at 23°. - By tripods without deposit tray you need also one kit tripod leg brackets (please order separately (item no.310022 for Uni tripods, 310020 für Report tripods ))

The tripod Report 933 is equipped with the module insert 3, i.e. with a permanently installed levelling ball, a diameter of 55 mm and a spirit level. This enables a quick and precise adjustment of the tripod. The pivoting range is 30° in all directions. The fastening screw is spring-loaded. Place your tilt head or your camera down and fasten it from below by means of the star knob screw. This module insert is particularly suitable for heavy equipment, because the integrated ball partly allows the work without additional tilt head. The lens or the camera is fastened directly on the tripod. Since there is only one connection between the tripod and the camera, this is the most stable and the safest method. Double tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.

Material: A2