Berlebach

- For mounting 2" accessories, like MAK or SC, to telescopes

- Spring to prevent the camera from tipping - Scale for horizontal panning - the vertical swivel is possible in a range from -40° to +90° - Swivel arm for right- and left-handed persons - Stable two-point axle bearing - camera plate 80 x 50 mm - Camera mounting thread 1/4" - Base thread 1/4" und 3/8" - Takes loads of up to 5 kg - Height: 9 cm

- Same sturdy design as model 520, but: Without swivel arm, instead - With additional clamping lever - camera plate 80 x 50 mm - Camera mounting thread 1/4" - Base thread 1/4" und 3/8" - Takes loads of up to 5 kg - Height: 9 cm

- Same sturdy design as model 520, but with additional features: Reinforced head plate - Spring-mounted video pin - camera plate 80 x 50 mm - Camera mounting thread 1/4" - Base thread 1/4" und 3/8" - Takes loads of up to 5 kg - Height: 9.5 cm

Albatros Its innovative construction allows this ball panning head to carry out laterally guided movements. At the same time, Pegasus offers high stability and easy operation. The unique "MotionControl" technology prevents unintented lateral tilting. The Pegasus tripod heads provides high stability for static exposures as well as unlimited flexibility in dynamic photography. You can use it with a wide range of lenses from wide angle to low aperture telephoto lenses plus for portrait and landscape formats. Pegasus is one of the most innovative tripod heads: Universal ? Optimal allround tripod head for usage in nature, tele and travel photography MotionControl ? Laterally stable guiding for controlled movement in dynamic tele photography Tilting stability ? Oversize ball allows firm fixation and enormous stability Ergonomic ? One single clamping lever ? always in same position relative to the camera lens unit Basis for panoramic photography by blocking of horizontal axis Fast & Secure ? Integrated quick releasecoupling in dove tail profile with safety pin, compatible for third party quick release plates (e. g. ArcaSwiss) - Tilt angle: 43 degrees - Friction preset - Panorama base locking - Ball diameter: 64 mm - integr. dovetail Quick release - Tripod adapter: Diameter 86 mm ? 3/8 " - Height: 112 mm - Max. load: 15 kg

This tilt head impress with innovative technology as well as with hight load capacity and has a low dead weight. The integrated quick-release-coupling mod. 110 can be quickly mounted offset by 90° using the added hexagon socket wrench. In this way, you can use this head as 3-way tilt head without limitation by means of an elbow that is attached to the camera. The locking of both planes is made thanks to a special mechanical system via one sole clamping element. The friction adjustment for the vertical tilt is effected via an adjusting wheel opposite to the clamping element. The quide handle is mountable for both right and left handed persons. Besides for taking photos, this tilt head is particularly suitable for observations with a spotting scope or with binoculars. Load capacity: 5 kg Height: 90 mm Diamter of ground plate: 68 mm Bottom thread hole: 3/8" (Threaded socket to 1/4" is included)

- 2-Way-Head with Quick Release Coupling mod. 130 (Arca-Swiss/UniQ/C-kompatibel) - with Quick Release plate 57 mm long - Spring to prevent the camera from tipping - Scale for horizontal panning - the vertical swivel is possible in a range from -40° to +90° - Swivel arm for right- and left-handed persons - Stable two-point axle bearing - load capacity 5 kg - Camera mounting thread 1/4" - Base thread 3/8" and 1/4"

This is our 2-way tilt head which allows swivels in the horizontal and vertical axis. Both axes are individually lockable and due to the friction adjustment of the vertical swivel they are also suitable for amateur film makers. The vertical swivel range of 90° in both directions is possible; the easiness or heaviness is adjustable via a friction adjustment. On the side of the fixation of the guide handle there is a brightly anodised adjusting knob, with which a load pick-up spring can be switched on. In case of camera weights of more than 3 kg this function should generally be used so that the camera or the spotting scope cannot strike forwards or backwards when the guide handle is released inadvertently. Load capacity: 6 kg Length of the arm after the crease: 23 cm (shorter arm is possible) The tilt head is equipped as a standard with the quick-release coupling mod. 150 (Arca-Swiss/UniQ/C compatible). It has two integrated rod spirit levels which allow an exact alignment of both axes and a locking pin which prevents that the change plate slips out accidentally. The quick-release coupling is removable and can be replaced by the quick-release coupling mod. 130 as well as the panorama plates P101 or P 103. The quick-release couplings mod. 130 and mod. 150 can be screwed on offset by 90° so that the tilt head is also suitable for cameras with portrait format angle. The scope of delivery includes the change plate 050/57 mm. The guide handle can be optionally mounted for right- and left-handed persons. By means of the delivered Allen key the retaining screw is loosened and the guide handle is inserted from the other side and then retightened. Thanks to the modular construction of the tilt head, it is possible to upgrade this 2-way tilt head to a 3-way tilt head by means of the "portrait format extension" component (art. no. 320196). Diameter of the ground plate for tripod connection: 68 mm Tripod connection 3/8?, threaded socket for reduction to ¼? is enclosed Height: 100 mm

INNOVATION ? modularly designed 3-way tilt head The quick-release coupling is removable and can be replaced by the quick-release coupling mod. 130, 140 and 150 as well as the panorama plates P101 or P 103. This tilt head can be swivelled vertically 90° in both directions. The easiness or heaviness is adjustable via a friction adjustment.

- Integrated quick clutch and interlock safety device - Pivoting range 90° in both directions - Friction control for vertical pan - For vertical pan connectible load-spring for loads over 2 kg - Integrated spirit levels - With additional 3rd axis for portrait work - Pan range fpr 3rd axis from 0° to +90° - Supplied with quick-change holders 040R and 040F with thread size 1/4", or 3/8" optional - Takes loads of up to 5 kg - Base thread sizes 1/4" and 3/8" - Height: 109 mm

INNOVATION ? modularly designed 3-way tilt head incl. quick-release coupling mod. 150 and change plate (ArcaSwiss/UniQ-C compatible) The tilt head is equipped as a standard with the quick-release coupling mod. 150. It has two integrated rod spirit levels which allow an exact alignment of both axes and a locking pin which prevents that the change plate slips out accidentally. The quick-release coupling is removable and can be replaced by the quick-release coupling mod. 130 as well as the panorama plates P101 or P 103. The scope of delivery includes the change plate 050/57 mm. The quick-release coupling mod. 150 can be replaced by the panorama plates P101 and P103 as well as by the quick-release coupling mod. 130. This tilt head can be swivelled vertically 90° in both directions. The easiness or heaviness is adjustable via a friction adjustment. load capacity: 6 kg

Pegasus ? The "Leading" Ball Head Its innovative construction allows this ball panning head to carry out laterally guided movements. At the same time, Pegasus offers high stability and easy operation. The unique "MotionControl" technology prevents unintented lateral tilting. The Pegasus tripod heads provides high stability for static exposures as well as unlimited flexibility in dynamic photography. You can use it with a wide range of lenses from wide angle to low aperture telephoto lenses plus for portrait and landscape formats. Pegasus is one of the most innovative tripod heads: Universal ? Optimal allround tripod head for usage in nature, tele and travel photography MotionControl ? Laterally stable guiding for controlled movement in dynamic tele photography Tilting stability ? Oversize ball allows firm fixation and enormous stability Ergonomic ? One single clamping lever ? always in same position relative to the camera lens unit Multifunctional ? Simple lateral tilting for portrait format. Basis for panoramic photography by blocking of horizontal axis Fast & Secure ? Integrated quick releasecoupling in dove tail profile with safety pin, compatible for third party quick release plates (e. g. ArcaSwiss) - Tilt angle: 43 degrees - Friction preset - Panorama base locking - Ball diameter: 64 mm - Quick release coupling 160 - Tripod adapter: Diameter 86 mm ? 3/8 " - Height: 112 mm - Max. load: 15 kg

- Optional tray with eyepiece holes, instead of the standard tray - holes 2" (see too accessory item no. 500641 adapter from 2" to 1.25") - Size: 37 x 37 x 37 cm

- Practical tray for small items, fits between the tripod legs to provide extra stability - A set of tripod leg brackets is also required for tray attachement purposes - Material birch plywood, due to the nature of the material, color deviations may occur especially with color-stained plates.

- Practical tray for small items, fits between the tripod legs to provide extra stability - A set of tripod leg brackets is also required for tray attachement purposes Material birch plywood, due to the nature of the material, color deviations may occur especially with color-stained plates.

The storage bag made of high-quality and extremely durable Cordura is primarily used for storing camera and accessory parts, but can also be used for loading (max. 5 kg). The bag has an edge length of 33 cm. To mount the hooks are mounted in the eyelets of built-in clamps on the tripod.

- Outside thread: 3/8" - Inside thread: 1/4" - Diameter: 89 mm - Height: 18 mm

- Outside thread: 5/8" 14 mm long - Inside thread: 3/8" - Diameter: 89 mm - Height: 26 mm

This adapter serves for connecting a Porta mounting to a Vixen GP tripod with M10 bolt.

Mit dem Tele-Adapter und den Original-Berlebach-Wechselplatten sind die Sigma 500-Teleobjektive an allen UniQ/C- und Arca Swiss kompatiblen Schnellwechselsystemen verwendbar. Der Austausch des ausgreifenden Originalfußes durch den Tele-Adapter von Berlebach mit seiner deutlich geringeren Bauhöhe reduziert den Platzbedarf, womit sich die Teleobjektive für den Transport viel einfacher verpacken lassen. Zudem werden durch den kompakt gebauten Adapter von Berlebach auch mögliche Schwingungen deutlich reduziert und ein verbessertes Handling durch einen optimierten Massenpunkt erreicht. Um den Adapter nutzen zu können, müssen die vier Befestigungsschrauben des Original-Olympus-Fußes mit einem M3-Inbusschlüssel gelöst werden. Mit den gleichen Schrauben wird dann der Berlebach-Adapter am Objektiv befestigt. Danach wird die Wechselplatte mit zwei 1/4" oder einer zentralen 3/8" Münzschlitzschraube(n) am Adapter befestigt. Bei Verwendung einer Original-Berlebach-Wechselplatte greift der Adapter in das Profil der Platte, so dass die Kombination vollkommen verdrehsicher in der Objektivachse auf einem Stativkopf befestigt werden kann. Je nach Länge der Wechselplatte, ist diese zum Gewichtsausgleich sowohl bei der Befestigung am Adapter, als auch mit der Position im jeweiligen Schnellwechselsystem nach vorn und nach hinten verschiebbar. Bei der Verwendung von UniQ/C Wechselplatten anderer Hersteller kann es zu Einschränkungen letztgenannter Vorteile kommen! Höhe des Adapters: 26 mm Der Adapter ist sowohl einzeln, als auch vormontiert mit einer Original-Berlebach-Wechselplatte lieferbar.

Adapter zur Montage von Berlebach-Schnellkupplungen an die Astromontierungen Castor und Spica. Mit diesem Adapter lassen sich unsere Schnellkupplungen an Berlebach-Geräteaufnahmen 1/4" und Berlebach-Prismenschienen mit Lochabstand 35 mm montieren. Hiermit lassen sich die astronomischen Geräte auch schnell zum Einsatz mit Fotoequipment umrüsten.

- Outside thread: 1/4" - Inside thread: 3/8" - Diameter: 68 mm - height: 18 mm - material: aluminium

- Diameter 68 mm - 3/8" hole in the bottom - M10 bolt in the top - Height: 18 mm - Material: aluminium, black anodized

- Outside thread: 3/8" - Inside thread: 1/4" - Diameter: 68 mm - height: 18 mm

Adapterscheibe Ø 68 mm aus Aluminium schwarz eloxiert unten 1/4" Innengewinde oben 1/4" Gewindepin

Adapterscheibe Ø 68 mm aus Aluminium schwarz eloxiert unten 3/8" Innengewinde oben 3/8" Gewindepin

Adapter with 3/8" bolt on each side Diameter: 68 mm Height: 18 mm Material: aluminium

- Adapter from 5/8" to 3/8" - Diamter 68 mm

Adapter zum Aufschrauben auf Stative Vixen GP mit Ø 60 mm

Adapter Ø 89 mm Thread hole 3/8" in the bottom and M10 thread bolt on the top Made from aluminium and black anodized

- Outside thread: 1/4" - Inside thread: 3/8" - Diameter: 89 mm - Height: 18 mm

Adapter mit Bodengewinde 5/8" und Gewindezapfen 3/8" Durchmesser der Auflagefläche: 89 mm Höhe: 26 mm zzgl. 13,5 mm langer Gewindezapfen Material: Aluminium schwarz eloxiert

- for ETX 70,90,105,125 - silver color

- for ETX 70, 90, 105, 125

- for switch of ETX 90

Seat Screw Zur Montage der Schraube wird einfach ein Loch in ein Brett gebohrt. Dort lässt sich die Schraube einsetzen und mit dem Sterngriff von unten verschrauben. Auf dem Auflageteller mit 1/4" bzw. 3/8" Gewinde kann man nun nach Belieben Neigeköpfe für die Fotografie oder zur Beobachtung mit Fernglas oder Spektiv befestigen. Durchmesser des Auflagetellers: 68 mm Länge der Schraube: 65 mm Durchmesser Sterngriff: 50 mm

- Antenna mounting with 2 horizontal holes (diameter: 22 mm) for the antenna - for centre columns tripods REPORT

Antenna Holder for antennas with diameter 22 mm (to 40 mm is possible) for fix on tripods with centre column diamter 40 mm on tripod UNI 19EMV

Antanna Holder for antennas with a diamter of 22 mm For the tripod system REPORT with centre column diamter 25 mm

Antenna holder for antennas with diameter 22 mm (to 32.5 mm is possible) To fix on centre columns of our tripods UNI 19EMV with centre column 40 mm diameter

Astroadapter for TAL MT-S3 pinsize Ø 60 mm / 2.36" , length 20 mm / 0.78" threaded hole in the center with M10 secondary 3 threaded holes with M6 thread (screws included)

With the development and production of the GRAVITON tripod we offer our customers the possibility to be mobile even with very large and heavy mounts. This astronomical high-end tripod clearly stands out from other substructures in many areas. - Best vibration damping of all our tripods by massive leg segments made of high-quality ash wood - Lever arm of the clamping element extendible for force optimisation - Innovative leg clampings with a flat spring, which compensates for the hygroscopy ot the wood - 100 % stability trough integrated toothed rack in 5 mm steps - Fine levelling dunction in the foot tips offer an adjustment path of 20 mm - The spread stopper can be mounted at different heights, so that leg spreads of approx. 20-30° are possible - CNC-manufactured metal parts ensure precise guidance, secure, powerful clamping and attractive design - A tray and spread stopper are included [YOUTUBE LINK=https://youtu.be/9PLIzWoRo8k] Please ask us for the shipping cost.

- Adjustable height, 12 settings from 10 to 93 cm - Wide back provides good spine support - Comfortable, slightly springy Wooden material - seat size 25 x 21 cm - Easily folded - Weight: 5.8 kg - Packaged size: 0.35 x 1.01 m - Maximum load 120 kg

- Smaller version of NIX II - Fully adjustable height from 25 to 75 cm - Easily folded - seat size 32 x 28 cm - Weight: 4 kg - Packaged size: 0.45 x 0.8 m - foot print size 45 x 67 cm - Maximum load 120 kg

- fully adjustable height from 25 to 95 cm - easily folded - seat size 32 x 28 cm - packaged size 45 x 103 cm - maximum load 120 kg - foot print size 45x80 cm - foot rest (item no. 500686) available extra

Zum schnellen Lösen des Anschlussflansches unserer K70 Stative. Mit Hilfe dieses kleinen Tool lässt sich der Konus ohne Kurbeln aus der Mittelsäule lösen.