CMOS & CCD Cameras
- Home /
- CMOS & CCD Cameras
CCD / CMOS Astrofoto Photography
For the successful hunt for celestial objects you will find the electronic aids here: sensors, OAG, accessories and important filters. A wide selection is available.
Atik T2 adapter for Atik One Kit (adaptations without Off Axis Guider) ..
223.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The Lacerta flatfield box is used to create flats, which are necessary for the accurate calibration of astrofotos. The vignetting (darker edge) and shadows of dust particles can thus be eliminated.
229.90 € 218.40 €
Estimated delivery time : 1-4 days (valid for new orders)
The camera offers a very high resolution and can be used for lunar and planetary photography, EAA and also for deep sky astrophotography.
- SONY STARVIS 2 technology - back illuminated pixel technology
- USB 3.0 for fast download of images
- No more amp glow detectable
- Passive cooling with heat dissipation against heating of the sensor during long time exposures
- Good suitability for deep sky imaging
- Rich field lens (removable) included in scope of delivery
229.00 € 217.55 €
Estimated delivery time : 1-4 days (valid for new orders)
Very high sensitivity in the far red / NIR region makes the GPCAM2 AR0130 especially good for solar imaging with the Daystar Quark other Hydrogen Alpha filters.
229.00 € 217.55 €
Estimated delivery time : 1-4 weeks (valid for new orders)
The flatfield box has a bright, homogeneous illuminated screen, which is simply attached with screws
214.95 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Feature summary Altair 662M CMOS Camera:
- IMX662 MONO CMOS Sensor with on-chip HGC, LCG and HDR Support
- Resolution: 1920 x 1080
- 2.9 um Square Pixels
- 1/2.8-inch Optical Format
- 12-bit ADC
- QE>91%
- Full Well 39ke-
- High Speed USB 3.0 interface
- 101fps Maximum 8bit mode
- 512 Mbyte Memory
- G Sensitivity: 5612mv with 1/30s
- Low Read Noise: 0.46e to 5.08e-
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
219.00 € 208.05 €
Estimated delivery time : 3-4 weeks (valid for new orders)
Very high sensitivity in the far red / NIR region makes the GPCAM2 224c especially good for solar imaging with the Daystar Quark other Hydrogen Alpha filters.
219.00 € 208.05 €
Estimated delivery time : 1-4 weeks (valid for new orders)
SW Guiding and Planetary Camera with Micron CMOS Sensor.
204.00 €
Estimated delivery time : 3-4 days (valid for new orders)
The flatfield box has a bright, homogeneous illuminated screen, which is simply attached with screws
199.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
The Lacerta flatfield box is used to create flats, which are necessary for the accurate calibration of astrofotos. The vignetting (darker edge) and shadows of dust particles can thus be eliminated.
179.90 € 170.91 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Omegon 1.25" Filter Wheel - change your filter in seconds
189.00 € 170.10 €
Estimated delivery time : 1-4 days (valid for new orders)
The new ZWO ASI120MM Mini (mono) is a highly sensitive planetary camera and an outstanding autoguider for astrophotography in a 1.25" body
179.00 € 170.05 €
Estimated delivery time : 1-4 days (valid for new orders)
Camera Tilting Unit to adjust the tilt of the focal plane when using Canon EOS lenses with CCD cameras
169.00 €
Estimated delivery time : 1-2 weeks (valid for new orders)
Camera Tilting Unit to adjust the tilt of the focal plane when using Nikon lenses with CCD cameras
169.00 €
Estimated delivery time : 1-2 weeks (valid for new orders)
Filter change in a few seconds without removing the camera, ideal for astrophotography - the filter holder is the compact and lightweight alternative to the filter wheel.
169.98 € 161.48 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Attach your Altair Hypercam camera to a Nikon photographic lens for wide-field astrophotography
159.00 € 151.05 €
Estimated delivery time : 2-4 weeks (valid for new orders)
Attach your Altair Hypercam camera to a Canon EOS photographic lens for wide-field astrophotography
159.00 € 151.05 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Attach your Altair Hypercam camera to a Canon EOS photographic lens for wide-field astrophotography
159.00 € 151.05 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Attach your Altair Hypercam camera to a Nikon photographic lens for wide-field astrophotography
159.00 € 151.05 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Off axis guider for large cameras
149.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Additional telescope/lens adapter EOS (compatible with C1 and C1+ camera with T-thread)
149.00 €
Estimated delivery time : 1-2 weeks (valid for new orders)
WIFI connection; connect your smartphone for remote control; suitable for bird watching photography and target training; allow you to see the surface of the target in real time on your phone; greatly improve efficiency and comfort
Feature:
- Universal Spotting scope WIFI Camera
- The device generates its own Wi-Fi Hotspot
- Mobile phone App, the app is a full-featured software application available for free
- Universally Mounts directly to spotting scopes with 1.25-inch diameter eyepiece
- Rechargeable LiPo Battery (estimated 1500mAh for 3-4 hour battery life)
- Compatible with current Svbony Camera App
- Capture pictures/videos directly through phone APP, then download and share to social media asap.
148.87 €
Estimated delivery time : 1-2 days (valid for new orders)
The Lacerta flatfield box is used to create flats, which are necessary for the accurate calibration of astrofotos. The vignetting (darker edge) and shadows of dust particles can thus be eliminated.
149.98 € 142.48 €
Estimated delivery time : 1-4 days (valid for new orders)
The ZWO filter drawer with M54 connection is made for all cameras with M54x0.75 thread connection, for example ASI6200MM and ASI6200MC
149.00 € 141.55 €
Estimated delivery time : 1-4 days (valid for new orders)
- Large prism design provides a wider field of view and ensures greater tracking accuracy.
- Adjustable prism height for precise alignment with different cameras and telescopes.
- Dual helical focuser enables fast and stable focusing, preventing star blurring due to inaccurate tracking.
- CNC-milled housing offers high robustness, withstands temperature fluctuations and deformation in outdoor use.
- Compatible with APS-C and smaller sensors.
- Supports M54, M48 and M42 threads for broad compatibility and quick setup.
139.00 €
Estimated delivery time : 2-4 weeks (valid for new orders)
Die neue Filterschublade für EOS Objektive wurde von ZWO speziell für gekühlte ASI-Kameras entwickelt.
145.00 € 137.75 €
Estimated delivery time : 1-4 days (valid for new orders)
Allsky camera lens 180 Degree FOV 1/2 1.55mm f2 CS mount for CMOS camera
- Clear bright and sharp image from horizon to horizon for your Allsky Camera.
- Capture meteors, aurora, space stations and satellites over the entire sky.
- 1/2" camera chip will give you a full 180 degree plus image circle.
- 1/3" chip will have slightly clipped top and bottom edges.
- Fits Altair, ZWO, QHY and other Allsky CMOS cameras.
- Colour or mono NIR corrected.
139.00 € 132.05 €
Estimated delivery time : 1-2 weeks (valid for new orders)
One of the most versatile solutions for multiple connections - for observation and imaging
119.90 €
Estimated delivery time : 1-4 days (valid for new orders)
This set contains all adapters necessary to achieve the correct back focus
119.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Can be used with almost every telescope, especially suitable for adaptions where only little space is available
119.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Especially stable off-axis guider for heavy CCD cameras.
119.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Adapter to M48x0,75 male / 2" filter thread with only 4mm lengh
109.90 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Power splitter box with 7 outputs: 4x fix (12V, RCA), 2x dimmed (1-12V, RCA) 1x USB (5V USB). Input: EQ8 plug. Inclusive
114.00 € 108.30 €
Estimated delivery time : 3-4 days (valid for new orders)
This adapter connects accessories with M68x1 thread to the 3 inch Apo corrector of TS Optics
99.90 €
Estimated delivery time : 1-4 days (valid for new orders)
Ideal solution for astrophotography with Canon EOS DSLR cameras.
99.90 €
Estimated delivery time : 1-4 days (valid for new orders)
Manufactured according to your specification
99.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
This Adapter allows a screwed connection between the TS Gigant Off Axis Guider and TeleVue reducers and correctors
99.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The USM-2 is a simple and flexible way to connect your smartphone to your APM (or similar) Spektiv with HR eyepiece and take high magnification photos and video.
99.00 €
Estimated delivery time : 1-2 days (valid for new orders)
Quick change between centering eyepiece and camera simply by turning a lever
99.00 €
Estimated delivery time : 1-4 days (valid for new orders)
It's so stable, even long exposures are possible, thanks to a metal clamping mechanism for both eyepiece and phone body. Way better than cheap all-plastic smartphone adapters.
Dimensions:
Fits eyepieces with outer diameter of 31mm to 55mm
Minimum smartphone size: 101x53mm (LxW)
Maximum smartphone size: 210x110mm (LxW)
Dimensions:
Fits eyepieces with outer diameter of 31mm to 55mm
Minimum smartphone size: 101x53mm (LxW)
Maximum smartphone size: 210x110mm (LxW)
99.00 € 94.05 €
Estimated delivery time : 1-3 weeks (valid for new orders)
Use Canon EOS lenses for wide-field photography with an ASI camera from ZWO.
99.00 € 94.05 €
Estimated delivery time : 1-4 days (valid for new orders)
This set contains all adapters necessary to achieve the correct back focus
89.90 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Fits directly to the M54 thread of CCD cameras e.g. by Atik or Moravian
89.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Connect your CCD camera to the Canon EOS bayonet and use your high-quality lenses for astrophotography.
89.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Thanks to its robust design and ease of use, the Tilt Adjuster Plate is an indispensable tool for photographers who want to get the best out of their Altair Hypercam TEC camera. It not only improves image quality, but also helps to ensure that the entire shooting equipment is stable and reliable.
90.00 € 85.50 €
Estimated delivery time : 1 week (valid for new orders)
The adapter allows mounting of Canon EOS camera lenses to ZWO ASI cooled cameras.
84.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Smartphone Camera Adapter
89.00 € 80.10 €
Estimated delivery time : Unbekannte Lieferzeit (valid for new orders)
The adapter ROT1 accepts 2" filters, enables a quick coupling and 360° rotation - the adapter has T2 threads on both sides
79.90 €
Estimated delivery time : 1-4 days (valid for new orders)
