CMOS & CCD Cameras
- Home /
- CMOS & CCD Cameras
CCD / CMOS Astrofoto Photography
For the successful hunt for celestial objects you will find the electronic aids here: sensors, OAG, accessories and important filters. A wide selection is available.
ALccd9C Color Astronomy CCD Camera with Kodak KAF8300 Sensor.
1795.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The QHY5-III series camera is a USB3.0 super-speed camera with a Guide Port. It still uses the same standard 1.25-inch eyepiece adapter and has an adjustable location ring for confocality with an eyepiece. The QHY5-III comes in a very small but powerful package!
748.00 €
Estimated delivery time : 2-4 weeks (valid for new orders)
The QHY5-III series camera is a USB3.0 super-speed camera with a Guide Port. It still uses the same standard 1.25-inch eyepiece adapter and has an adjustable location ring for confocality with an eyepiece. The QHY5-III comes in a very small but powerful package!
768.00 €
Estimated delivery time : 3-4 days (valid for new orders)
SW Guiding and Planetary Camera with Micron CMOS Sensor.
296.00 €
Estimated delivery time : 3-4 days (valid for new orders)
SW Guiding and Planetary Camera with Micron CMOS Sensor.
204.00 €
Estimated delivery time : 3-4 days (valid for new orders)
ALccd-QHY PoleMaster
339.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Allsky camera lens 180 Degree FOV 1/2 1.55mm f2 CS mount for CMOS camera
- Clear bright and sharp image from horizon to horizon for your Allsky Camera.
- Capture meteors, aurora, space stations and satellites over the entire sky.
- 1/2" camera chip will give you a full 180 degree plus image circle.
- 1/3" chip will have slightly clipped top and bottom edges.
- Fits Altair, ZWO, QHY and other Allsky CMOS cameras.
- Colour or mono NIR corrected.
139.00 €
Estimated delivery time : 1-2 weeks (valid for new orders)
This filter slider holds a mounted 1.25" filter and fits into the Altair version 2 magnetic filter holders.
52.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Altair 2" Adapter für GPCam CMOS Kameras
39.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
This filter slider holds a mounted 2" filter and fits into the Altair version 2 magnetic filter holders.
59.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Filter change in a few seconds without removing the camera, ideal for astrophotography - the filter holder is the compact and lightweight alternative to the filter wheel.
169.98 €
Estimated delivery time : 1-4 days (valid for new orders)
Feature summary Altair 2210C CMOS Camera:
- SC 2210 Colour CMOS Sensor
- 1920 x 1080 pixel resolution:
- 4 um Square Pixels
- 1/1.8-inch Optical Format
- 12-bit ADC
- 512mb DDR3 Memory
- G Sensitivity: 20100mv/lux*s
- Low Noise: : 0.47 to 3.2e-
- Fast Frame Rate 50 FPS in 8bit mode
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
479.00 €
Estimated delivery time : 3-4 weeks (valid for new orders)
