Focuser & Accessories

Focusers and Accessories

A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".

View as Grid List
Sort by
Display
The 1:10 dual speed gear allows for significantly better focusing.
99.00 €
Delivery date : 1-4 days
 
 
DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS
239.00 €
Delivery date : 1-4 days
 
 
DUAL-SPEED 2" CRAYFORD FOCUSER FOR SKY-WATCHER REFRACTORS
239.00 €
Delivery date : 1-4 days
 
 
This adapter fits the Astro Tech 65mm refractor or TS-Optics Imaging Star 65 mm quadrulet astrograph and is designed to fit the 2.0" Rack/Pinion Feather Touch Focuser. Use with focuser FTF2015BCR-RP.
200.00 €
Delivery date : 1-4 days
 
 
Adapter for the M63 APM-Riccardi Reducer to Starlight 3" Focuser.
88.00 €
Delivery date : 1-4 days
 
 

The highlights at a glance:

  • Ball bearing 2" focuser: optimise your telescope with a more precise focuser for observation and photography
  • Easy focusing: so you will be able to focus fast and not overshoot the target
  • Adjustable: the friction can be adjusted
  • 1kg load capacity. In addition, you can use the locking screw to fix the focus at any time if it should no longer deviate from the current setting.
  • Focus on the point even at higher magnification
  • 78mm diameter connector
  • 59mm draw tube travel
  • Height: 76mm to 2" adapter
  • Incl. 2" to 1.25" adapter with filter thread (only 3mm optical travel)
  • Weight 492g
 
79.00 €
Delivery date : 3-4 days
 
 

Equip the 3" MONORAIL focuser from TS-Optics with the ZWO EAF motor focus system.

  • Suitable for all 3" Monorail focusers and telescopes equipped with these focusers
  • Suitable for all TS-Optics RC and Cassegrain telescopes with 10" aperture and larger
  • Allows the use of the EAF motor focus system from ZWO
  • Includes mounting adapter and four screws
  • Easy and self-explanatory mounting, you will receive the mounting instructions after your purchase in an environmentally friendly PDF format
  • Dimensionally stable up to 90 °C due to the use of PETG in 3D printing
119.00 €
Delivery date : 3-4 days
 
 
Equip the 2" MONORAIL focuser from TS-Optics with the ZWO EAF motor focus system.
  • Suitable for all 2" Monorail focusers and telescopes equipped with these focusers
  • Allows the use of the EAF motorfocus system from ZWO
  • Includes mounting adapter and four screws
  • Simple and self-explanatory assembly, you will receive the assembly instructions after your purchase in an environmentally friendly PDF format
  • Dimensionally stable up to 90 °C due to the use of PETG for 3D printing
119.00 €
Delivery date : 3-4 days
 
 

Equip the 2" Crayford focuser from TS-Optics with the ZWO EAF motor focus system.

  • Suitable for all 2" Crayford focusers and telescopes equipped with these focusers, e.g. TS-Photon Newtons
  • Fits to the Crayford focusers with and without micro-reduction
  • Allows the use of the EAF motor focus system from ZWO
  • Elaborate and elegant adaptation to the focuser
  • Includes mounting adapter and screw
  • Simple and self-explanatory mounting incl. mounting instructions
  • Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
99.00 €
Delivery date : 3-4 days
 
 

Equip the 2.5" RAP focuser from TS-Optics with the ZWO EAF motor focus system.

  • Suitable for all 2.5" TSFOCR25, TSFOCR25S and TSFOCR25-117 focusers and telescopes equipped with these focusers
  • Allows the use of the EAF motor focus system from ZWO
  • Includes the complete mounting, you do not need any accessories
  • Simple and self-explanatory mounting
  • Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
  • Eyepiece extension and motor focus are not included in the scope of delivery
79.90 €
Delivery date : 3-4 days
 
 
Equip the 3" RAP focuser from TS-Optics with the ZWO EAF motor focus system.
  • Allows the use of the EAF motorfocus system from ZWO
  • Includes the complete mounting, you do not need any accessories
  • Simple and self-explanatory mounting
  • Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
  • Eyepiece focuser and motor focus are not included in the scope of delivery
84.90 €
Delivery date : 3-4 days
 
 

Equip the 3.7" TS-Optics rack and pinion focuser with the ZWO EAF motor focus system.

  • Suitable for 3.7" TSFOCR, focusers and telescopes equipped with these focusers
  • Allows the use of the EAF motorfocus system from ZWO
  • Includes the complete mount, you do not need any accessories
  • Simple and self-explanatory mounting
  • Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
  • Eyepiece focuser and motor focus are not included in the scope of delivery
79.90 €
Delivery date : 3-4 days