photo tripod & accessories

Spikes for attachment to the feet of tripods REPORT 1 set = 3 pcs.

- Size 36 x 31 cm - Takes loads of up to 18 kg - Can be mounted on any Report Berlebach tripod with metal centre column - in order to fit the plate is the centre column to turn - Suitable for projector, monitor, laptop computer, etc.

- Size 36 x 31 cm - Takes loads of up to 10 kg - Fits on 3/8" screw thread - Due to the nature of the material, color deviations may occur especially with color-stained plates. - Suitable for projector, monitor, laptop computer, etc.

- Is mounted to the centre column of tripods REPORT - Can be simply tucked away inside the centre column when not in use - Ideal for near-ground-level exposures - Possible to attach an extra piece of equipment - Camera thread 1/4" and 3/8" - Length: 25 cm

Neigung 20° Höhe: 39 mm Auflagefläche: 55 mm Befestigungsschraube 3/8" belastbar bis 10 kg Drehmoment: 10 Nm Maße ohne Griff: 62 x 72 x 41 mm Maße mit Griff: 71 x 109 x 41 mm

levelling angle: 15° height: 39 mm / 1.4" supporting are Ø: 62 mm / 2.44" fastening screw: 3/8" max. load: 15 kg / 33 lbs torgue: 20 Nm / 14.75 ldf/ft size without handle: 95 x 90 x 36 mm / size with handle: 100 x 134 x 36 mm Our levelling plate N 75 is suitable for all tripods with no possibility for direct adjustment of a 2- or 3-way tilt head. Thanks to its high load capacity and a max. torque of 20 Nm, it is also suitable for large gimbal tilt heads. The fastening handle can be rotated freely. Consequently, it can always be mounted in such a way that it does not jut into the picture. This levelling plate is the ideal solution for all those who particularly appreciate small and light equipment which is extremely stable at the same time. In many cases, the camera can be directly fastened on the plate using a quick connector, what makes the use of large tilt heads unnecessary.

Our levelling plate N90 is suitable for all tripods that do not offer any possibility to align a 2-way or 3-way tilt head directly. Thanks to the high load-bearing capacity of the levelling plated N90 of 20 kg and a maximum torque of 40 Nm they are also suitable for big Gimbal tilt heads. Inclination: 15° Diameter: 77 mm Height: 55 mm Load capacity: 20 kg Thread: 3/8"

Durch den Klappwinkel für den Transport klein zusammenklappbar und trotzdem enorm stabil. Komplettset für Zylinderpanoramen, für Kugelpanoramen ist noch eine zusätzliche Panoramaplatte erforderlich. Belastbar bis 5 kg Lieferumfang: - Panoramawinkel, klappbar - Panoramaschiene 157 mm - Schnellkupplung Mod. 110 ohne Wechselplatte - Distanzstück für Schnellkupplung 110 - Panoramaplatte P 101

All in One! The complete solution for the panoramic photography. Fold, swivel, take photos. The folding and swivelling elbow is the newest innovation by Berlebach. A product which convinces in torsional stiffness and resilience. It excels in compactness and with the fact that it is built up within seconds. All in One! The complete solution for the panoramic photography. Fold, swivel, take photos. The folding and swivelling elbow is the newest innovation by Berlebach. A product which convinces in torsional stiffness and resilience. It excels in compactness and with the fact that it is built up within seconds. Since it is a Multi-Row panorama head, spherical panoramas are no problem for the MR 190. The horizontal plane (X-axis) is characterized by a functional scale which simplifies the alignment of the camera. The vertical plane is aligned at 90° by a snap-in element when the device is tilted up, and is clamped backlash-free via a wing nut. A 15° snap-in stage had been designed for the adjustment of the nodal rail. A big hand wheel allows with little rotating movements an exact positioning and fixation at the same time, whereat also the safety of your equipments had been considered and a hasty unintended tilting is prevented. The camera connection is constituted by the coupling model 110, which can be retained via a coin slot screw and moreover can be shifted by 90°. When you loosen this screw, it is possible to adjust the Z-axis, which must be adapted objective-specific in order to determine the nodal point. The small number of operating elements provides clearness and contributes to intuitive usage. - vertical 15° scaling - Camera connection with quick-release coupling model 110 - Notches for saving weight - Scaling for aligning the camera on the X-Axis - ultra-stable - Exact fixation of the vertical axis - Large adjustment ranges (also suitable for full format with large objectives) - Z-axis with adjustment range of 105 mm / 4.1 inch - Load capacity: 5,00 kg = 11 lb.

Panorama clamp angle 157 mm with scala - length: 157 mm - with embedded rubber cord which prevents camera slipping - thread size: 2x 1/4"

Panorama clamp plate 227 mm with scala - length: 227 mm - with embedded rubber cord which prevents camera slipping - thread size: 2x 1/4"

Panorama clamp angle 117 mm with scala - length: 117 mm - with embedded rubber cord which prevents camera slipping - thread size: 2x 1/4"