photo tripod & accessories

Mechanischer Fernauslöser für alle Kameras mit Gewinde im Auslöseknopf. Der Drahtauslöser ist außerdem mit eine Feststellfunktion für Langzeitbelichtungsaufnahmen ausgerüstet. Länge 50 cm

Fast an secure locking an tables to 65 mm thickness. The clamp can be combined with all modules for Report tripods. So you can adjust the clamp for special tasks.

Der Stativwagen ist für unsere Stative REPORT aus dem EMV-Bereich. Er ist für die Stative 2022 HL, 2022 MF und 9023/3 geeignet. Das Stativ lässt sich durch die exzentrisch befestigten Scheiben befestigen. Für Stative, die nicht weit ausgezogen werden und damit nur eine geringe Standfläche aufweisen, kann die innere Arretierung genutzt werden. Alle Räder haben einen Durchmesser von 75 mm und verfügen über Totalfeststeller zur Fixierung des Wagens. Im zusammengeklappten Zustand kann der Wagen am Griff leicht getragen werden.

This special stand is designed for the ring antenna HFH2-Z2E. It allows positioning the antenna at a height range of 989 to 1633 cm. The antenna can be rotated or tilted in all three dimensions, enabling measurements in any vibration direction. The four wheels facilitate quick relocation, while the four leveling axes secure the cart and ensure rapid leveling. [YOUTUBE LINK=https://youtu.be/2Mtp-h0-prI]

Ceiling mount for installation on the room ceiling Connection thread 1/4" or 3/8" Height adjustment 423 mm for measuring devices, cameras, or projectors load-bearing up to 5 kg Attachment to the ceiling with 4 screws (included)

THE NEW MODULAR REPORT TRIPOD SYSTEM The light magnesium mounting head serves as module basis for 10 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the new stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs. The tripod Report 432/P is equipped with the module insert 3/P, i.e. with a permanently installed levelling ball, a diameter of 55 mm ,spirit level and an integr. panorama plate. This enables a quick and precise adjustment of the tripod. The pivoting range is 30° in all directions. The fastening screw is spring-loaded. Place your tilt head or your camera down and fasten it from below by means of the star knob screw. This module insert is particularly suitable for heavy equipment, because the integrated ball partly allows the work without additional tilt head. The lens or the camera is fastened directly on the tripod. Since there is only one connection between the tripod and the camera, this is the most stable and the safest method. Single tripod leg extension.

The FGX3 is an especially stable photo tripod with central column with maximum load capacity up to 15 kg for pan-tilt heads and ball heads.

Adapterscheibe Ø 68 mm aus Aluminium schwarz eloxiert unten 1/4" Innengewinde oben 1/4" Gewindepin

- passend für Gegengewichtsstangen mit Durchmesser 20 mm - Außendurchmesser 100 mm - Dicke 50 mm - Klemmung mittels Sterngriffschraube