photo tripod & accessories

- One thread screw and locking pin - Length: 57 mm - Height 20 mm - UniQ/C-kompatibel

Material: A2

Easy support for Photo-boxes, simple to connect, screws included.

In Zusammenarbeit mit Arkadi & Herndrik von GIF it to YOU (www.gifittoyou.com) produzieren wir ein Gehäuse für eine Fotobox-Lösung, die mit ihrer Einfachheit, Kompaktheit und Ästhetik beeindruckt. Konzipiert für die Nutzung mit einem iPad, ermöglicht die Kombination aus stilvoller Hardware und umfangreicher Software ein völlig neuartiges Konzept. Das freundliche Design aus Holz passt in jede Hochzeits- oder Eventlocation, Bar oder Geschäft und spricht die Gäste sofort an. Die Lösung besticht außerdem mit schnellem Auf- und Abbau und der optionalen Unabhängigkeit von der Steckdose. Verkauft wird nur das Gehäuse ohne elektrische Komponenten. Mit dem Kauf und - falls gewünscht - wird eine Liste mit optionalen Geräten verschickt. Bestellung bitte an: hey@gifittoyou.com Zum Lieferumfang gehören: - Hauptelement ohne Ringlicht - Stativ Report 332 - Ablageplatte - Stativtasche

UNI-Auto - Berlebach has completely rethought the topic of a car tripod Those who want to take pictures from the car in the wild are usually too slow with the classic car window tripod or the beanbag solution. Until everything is set up, the motif is mostly long gone. With the new UNI-Auto, Berlebach ® Stativtechnik offers a well thought-out, practical solution based on an idea by the well-known photographer and filmmaker Dietmar Nill. Based on the tripod shoulder and the leg profile of the UNI system, a tripod was developed that fits into the passenger seat and is fixed with the normal three-point belt. On the feet, which are often equipped with sharp steel tips on common tripods, the UNI-Auto scores with elegantly rounded ash wood, which does not attack even the highest quality leather upholstery and which still guarantees that the camera equipment is ready to shoot. You move the fully assembled equipment into the shooting position and open the side window glass electrically and you are ready to shoot immediately without the lens sticking out of the vehicle. The subject is therefore not scared and the longest 800 mm telephoto lens remains protected from the rain inside the vehicle. The UNI-Auto, which is available in natural ash wood colour, is equipped with a levelling unit with a diameter of 100 mm, which can be swivelled by 15° and on which any head or tripod head can be screwed using a 3/8? fastening thread. In order to be equipped for a wide range of vehicles, each UNI-Auto is supplied with two 2 long (62/97 cm) and two short (47/72 cm) tripod legs. Depending on your wishes, two long and one short or two short and one long leg can be fitted, but this can be changed easily. Installation description The UNI-Auto can be installed quickly, easily and without any tools. One leg to the footwell and one leg over the seat cushion to the B-pillar. In vehicles without a centre console, one leg is directed towards the floor between the seats and in vehicles with a centre console, one leg lies flat on the centre console. Technical data The UNI-Auto weighs 4.10 kg and, as a UNI family member, it has very good vibration damping. It can be used with equipment weighing up to 20 kg. The minimum height is 17 cm, the maximum height is 70 cm and the packed length without head/panhead is 64 cm. [YOUTUBE LINK=https://youtu.be/ZlQVySN8drY]

Adapter with 3/8" bolt on each side Diameter: 68 mm Height: 18 mm Material: aluminium

Adapter mit Bodengewinde 5/8" und Gewindezapfen 3/8" Durchmesser der Auflagefläche: 89 mm Höhe: 26 mm zzgl. 13,5 mm langer Gewindezapfen Material: Aluminium schwarz eloxiert

- Adapter from 5/8" to 3/8" - Diamter 68 mm

Platte zum Aufstellen der Druckerbox Größe: 400 x 510 mm (zwischen den Randleisten) Lochdurchmesser: 52 mm Gewindeaufnahme: 3/8" Mittig belastbar bis 18 kg

- Length: 30 mm - for Quick-Release Coupling 110/130/150/153/160 and Tilt Heads 510/553/653 - ArcaSwiss bzw. UniQ/C kompatibel

There are many camera safety belt systems on the market, but with Berlbebach?s SPEEDY, handling the camera becomes even faster and less complicated. By contrast to other designs, the system cannot be detached by itself. This is realised with the help of a patented spring clip system, which only releases your change plate when you wish it to! All Berlebach, Arca, Kirk and Really Right Stuff, Novoflex and Burzynski change plates can be used. How is the SPEEDY different from other systems? The SPEEDY is not screwed directly into the camera ? instead, it is mounted onto your change plate ? therefore, cumbersome switching between safety belt and change plate will no longer be necessary. Simply loosen the SPEEDY and place the camera onto the tripod head, and you?re ready to go! (If the change plate is long enough, you won?t even need to loosen the SPEEDY.)

Centre column 97 cm long made from GFK-tube with diameter 40 mm