iOptron

iOptron # 7300 CEM120 An extraordinary innovation in mount design...Now with a new payload!

• A new design, center-balanced equatorial mount (CEM) for maximum payload with natural stability
• Payload of 115 lbs (52 kg) with the mount weight of 57 lbs (26 kg)
• Precision stepper motor with 0.07 arcsec accuracy for precise GOTO and accurate tracking
• Polar alignment routine for those who can´t see the Pole Star
• Go2Nova® 8407 V2 controller with Advanced GOTONOVA® GOTO Technology
• High precision tracking with low periodic error (PE)<±3.5 arcsec and permanent periodic error correction
• Built-in WiFi and LAN for remote operation
• Integrated ST-4 autoguiding port and GPS
• Losmandy Level telescope connection

iOptron # 7300 CEM120 An extraordinary innovation in mount design...Now with a new payload!

• A new design, center-balanced equatorial mount (CEM) for maximum payload with natural stability
• Payload of 115 lbs (52 kg) with the mount weight of 57 lbs (26 kg)
• Precision stepper motor with 0.07 arcsec accuracy for precise GOTO and accurate tracking
• Polar alignment routine for those who can´t see the Pole Star
• Go2Nova® 8407 V2 controller with Advanced GOTONOVA® GOTO Technology
• High precision tracking with low periodic error (PE)<±3.5 arcsec and permanent periodic error correction
• Built-in WiFi and LAN for remote operation
• Integrated ST-4 autoguiding port and GPS
• Losmandy Level telescope connection

The # C262A3 CEM26 from iOptron carries telescopes up to 12 kg at only 4.5 kg own weight. The mount is ideal for mobile use.

• Unique design, Center Balanced Equatorial Mount (CEM) for maximum payload and minimum mount weight.
• Ideal for both visual observation and astrophotography
• Accurate tracking for astrophotography
• Adjustable counterweight rod for operation from 0º latitude
• Integrated iOptron iPolarTM electronic polar finder
• Polar alignment routine for those who cannot see Polaris
• Go2Nova® 8409 control with advanced GOTONOVA® GOTO technology with 212,000 objects stored in memory and large LC display
• Integrated ST-4 autoguiding port
• Built-in WiFi
• USB port for firmware upgrade and computer control
• Stable 1.75" LiteRoc heavy duty stainless steel tripod
• Hard case

The CEM40 is optimized for mobile astronmy and astrophotography. It carries payloads of up to 18 kg with an own weight of only 7.2 kg (mount head).

• Center-balanced design for better lever arms
• Integrated electronic polar finder (iPolar)
• Payload up to 18 kg (telescope weight)
• Dual clamp for Vixen and Losmandy dovetail bars
• High-quality stepper motors for precise tracking and GoTo
• Go2Nova 8407+ hand controller with integrated heater (for flawless operation even in cold conditions)
• Permanent electronic correction of periodic error (PPEC)
• ST4 autoguiding port
• Internal cabling
• WiFi compatible (with optional adapter)
• Height-adjustable 1.75" LiteRoc steel field tripod and 4.5 kg counter weight included

The CEM40 is optimized for mobile astronmy and astrophotography. It carries payloads of up to 18 kg with an own weight of only 7.2 kg (mount head).

• Center-balanced design for better lever arms
• Integrated electronic polar finder (iPolar)
• Payload up to 18 kg (telescope weight)
• Dual clamp for Vixen and Losmandy dovetail bars
• High-quality stepper motors for precise tracking and GoTo
• Go2Nova 8407+ hand controller with integrated heater (for flawless operation even in cold conditions)
• Permanent electronic correction of periodic error (PPEC)
• ST4 autoguiding port
• Internal cabling
• WiFi compatible (with optional adapter)
• Height-adjustable 1.5" steel field tripod and 4.5 kg counter weight included

Note: Some pictures show an older version of the mount

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• High-precision stepper motors for precise positioning and tracking
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 3.5 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• iGuider built in Autoguider
  
• High-precision stepper motors for precise positioning and tracking
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 3.5 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• High-precision stepper motors for precise positioning and tracking
• Optical encoders allow Realtime PEC
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 0.3 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• High-precision stepper motors for precise positioning and tracking
• Optical RA/DE encoders allow Realtime PEC
• WLAN
  
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 0.3 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• High-precision stepper motors for precise positioning and tracking
• Optical RA encoders allow Realtime PEC
• WLAN
  
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 0.3 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• High-precision stepper motors for precise positioning and tracking
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 3.5 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

• New: ready to mate with Intel® NUC minicomputer at the front of the dovetail saddle seamlessly with the cable management system

The counterweight set is helpful for the SkyTracker Pro for balancing heavy cameras or small telescopes.

• Fits to the SkyTracker Pro
• We recommend the package with loads of 2 kg and more
• With this, you can get the load perfectly into equilibrium