M42/T2-Screw

The adapter enables the connection of photo accessories with M48 thread to the FMA 180 telephoto lens

• Connection at the telescope side: M42x0.75 female thread
• Connection at camera side: M48x0.75 male thread
• Working distance from M48 thread: 55 mm

Short adapter from 2" SC thread to T2 - length approx. 10 mm - for focal photography with Schmidt-Cassegrain telescopes.

• Telescope side connection: SC thread, female;
• Camera side connection: T2-thread (M42x0.75), male;
• Extremely short with only 10 mm length;
• Fits to all SC threads from Celestron, Meade, Sky-Watcher, Orion and to all construction types, like Schmidt-Cassegrain, Edge-HD, ACF;
• With this adapter and an optional T2 ring, you can attach your SLR directly to the telescope for doing focal photography.

TS-Optics Adaptor with female T2 thread and male M48x0,75 filter thread

The adapter extends a male T2 thread to M48x0.75 (2") filter thread without increasing the length.

• Female thread: continuous T2 - M42x0.75
• Male thread: continuous 2" filter thread - M48x0.75
• Length: 4 mm - the mechanical length is optically not effective, as the adapter is completely sunken in the connection adapter

This adapter allows attaching T2 accessories to the M48 x 0.75 thread.

• Telescope side thread: M48 x 0.75 (2" filter thread), male
• Secondary thread on telescope side: T2 - M42 x 0.75, female
• Camera side thread: T2 - M42 x 0.75, male
• Optical length: 2.2 mm
• Versatile M48 and T2 adapter

This adaptor enables the connection of T2 accessories to adaptors with M48x0.75 male thread.

• Telescope-sided thread: M48x0.75 - 2" female filter thread - length 5 mm
• Camera-sided thread: T2 - M42x0.75 male thread - length 4 mm
• Optical length is 6 mm not counting the male thread

The T2i-M28i TS adapter is only 10 mm long and allows eyepieces to be quickly adapted to the T2 external thread.

• Connection at telescope end: T2 (M42x0.75) female thread - widely used or easy to fit
• Eyepiece side mount: M28x0.6 internal thread - on some eyepieces the 1.25" filter thread is also used to connect to the barrel.
• The 10mm length saves valuable optical path
• The second image shows the use of the adapter between ORIR12 and TSOAG27 (eyepiece, illumination and off-axis guide not included).

The digiscoping adapter BW-T2 allows attaching of cameras to BW spotting scopes from TS Optics.

• Suitable for, amongst others, all older TS BW spotting scopes, and also to all eyepieces with 37 mm connection thread
• Easy adaption - instead of the eyecup, the adapter is screwed to the eyepiece
• Suitable for SLR, mirrorless system cameras and also cameras with fixed lenses
• Connection adapters can be found in the "recommended accessories" section below