Mechanical Accessories
- Home /
- Mechanical Accessories
Mechanical Accessories
Little things and components for Self-Made-Man, accessories and adapters, updates and upgrades. Everything you need and could need can be found here.
Normally, a telescope takes parallel light rays from a distant star and converges them to a point at the eyepiece focus. Barlowed laser collimation takes advantage of the fact that a telescope will work in reverse. /... /
- Attaches to laser aperture for making the primary mirror adjustment quick, efficient and compact.
- The Howie Glatter Barlow Laser Collimator Attachment diverges the beam just behind your barlow lens for accurate alignment.
- Allows the user to make solo adjustments.
- The Howie Glatter Barlow Laser Collimator Attachment fits the threaded aperture of any of Glatter holographic collimator.
- Disc attachment with a small mounted barlow lens and flat white front surface screen.
159.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Gear reduction 1:10 for 2.5" Messier Hexafoc focuser
99.00 € 89.10 €
Estimated delivery time : 1-4 days (valid for new orders)
The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise.
74.90 € 67.41 €
Estimated delivery time : 3-4 days (valid for new orders)
This dovetail rail is suitable for mounting on BRESSER MESSIER 6 , 8 and 10 inch Dobson telescopes. The dovetail rail is manufactured according to the GP standard and therefore these Dobson telescope tubes can be used on any telescope mounting with the appropriate carrying capacity.
- dovetail rail (GP) for 6, 8 and 10 inch MESSIER Dobson telescopes
- when using these telescope tubes on EQ mounts
- the assembly is carried out on the original tube rings
- also suitable as spare part for MESSIER telescopes with 200mm prism rail
- assembly material and tools included
- length: 200mm; width: 45 mm; height: 16 mm
- bore spacing: 160 mm; Bore diameter: 6.5 mm
- dovetail rail (GP), mounting screws and hex wrench tool included
29.00 € 26.10 €
Estimated delivery time : 3-4 days (valid for new orders)
Concenter Ray
79.00 € 75.05 €
Estimated delivery time : 3-4 days (valid for new orders)
Concenter SE 1.25 Inch
69.00 € 65.55 €
Estimated delivery time : 1-2 days (valid for new orders)
Concenter SE 2 Inch
69.00 € 65.55 €
Estimated delivery time : 3-4 days (valid for new orders)
Concenter VISUS - Precise adjustment despite glasses
99.00 € 94.05 €
Estimated delivery time : 3-4 days (valid for new orders)
Camera Tilting Unit to adjust the tilt of the focal plane when using Canon EOS lenses with CCD cameras
169.00 €
Estimated delivery time : 1-2 weeks (valid for new orders)
Camera Tilting Unit to adjust the tilt of the focal plane when using Nikon lenses with CCD cameras
169.00 €
Estimated delivery time : 1-2 weeks (valid for new orders)
Adapter set between Feathertouch 2 inch focusers and MotorFocusLA
90.00 € 85.50 €
Estimated delivery time : 3-4 days (valid for new orders)
Versatile base for flat surfaces, suitable for UNCN2, UNCN2-S, GSO focusers and older Baader Steeltrack focusers
- Flat support surface with only 5.2 mm overall height
- Four elongated holes for exact adjustment of the focusers
- Four counter screws to compensate a tilted position of the focuser
- Suitable for all focusers with a dovetail ring between 76-78 mm on the telescope side
- Secure fastening of the focusers with four M3 grub screws - not included in the scope of delivery
34.00 € 32.30 €
Estimated delivery time : 1 week (valid for new orders)
