Motors & Controllers

Equip the popular Motorfocus on Baader Diamond Steeltrack focusers with the ZWO EAF Pro motor focus system.

• Fits Motorfocus on Baader Diamond Steeltrack
• Enables the use of the EAF motor focus system from ZWO
• Manufactured using 3D printing
• Resistant to UV rays and temperatures up to approx. 80° C
• The Motorfocus on Baader Diamond Steeltrack and the ZWO EAF Pro are not included in the scope of delivery

Equip the popular Skywatcher Evolux 62 and 82 focusers with the ZWO EAF Pro motor focus system.

• Suitable for Skywatcher Evolux 62ED and 82ED refractor focusers
• Enables the use of the EAF motor focus system from ZWO
• Manufactured using 3D printing
• Resistant to UV rays and temperatures up to approx. 80° C
• The Skywatcher 62ED and the ZWO EAF Pro are not included in the scope of delivery

The bracket allows the ZWO EAF to be connected to different telescopes and enables self-adaptation.

• Directly suitable for Takahashi, Skywatcher Esprit, Vixen VC200L and Orion ED80T
• Adaptable to different focusers with minimal changes
• Additional 4 mm coupler

Temperature sensor allows accurate control of ambient temperature to maintain focus position during temperature changes

• The sensor is connected directly to the motor focus.
• The outdoor temperature is measured and can automatically compensate the focus drift by changing the temperature via the corresponding software.

Equipped with USB-C, Bluetooth and rechargeable battery, the focus motor from ZWO allows precise motorized focusing of your telescope for astrophotography and observation.

• USB-C connection for data transfer and power supply
• Can be controlled via Bluetooth
• Integrated rechargeable battery with up to one week of operating time
• Can easily move up to 5 kg
• ASCOM, ASIAIR and INDI are supported
• The ZWO EAF works with all common astrophotography programs and the ASIAir
• Can be controlled via smartphone or tablet
• With versatile connection plate for all common focusers, e.g. from TS-Optics, Astro Tech, Feather Touch ...
• On/off switch and focus buttons

The USB-C equipped focus motor from ZWO allows precise motorized focusing of your telescope for astrophotography and observation

• USB-C port for data transfer and power supply
• Can easily move up to 5 kg
• ASCOM, ASIAIR and INDI are supported
• The ZWO EAF works with all common astrophotography programs and the ASIAir
• Can be controlled via smartphone or tablet
• With versatile connection plate for all common focusers, e.g. from TS-Optics, Astro Tech, Feather Touch ...
• Standard version with focus motor, connection rail and USB-C cable etc.
• Handbox and temperature sensor available separately (included in the scope of delivery of the EAF Pro, see "Similar products")

Astroprints Toup Tek Mounting Kit for AAF Motor Focus on Monorail 3" Eyepiece Holder

• All 3" monorail focusers
• TS-Optics 10" - 16" RC telescopes and Cassegrains

Astroprints Toup Tek Mounting Kit for AAF Motor Focus on Monorail 2" Eyepiece Holder

• All 2" monorail focusers
• TS-Optics 6“ and 8” RC telescopes and Cassegrains
• TS Photon Newton telescopes with 2" monorail focusers

Equip the popular UNCN2-G2 und TSRPN2 focusers with the Toup Tek AAF motor focus system.

• Suitable for UNCN2-G2 und TSRPN2 focusers
• Enables the use of the AAF motor focus system from Toup Tek
• Manufactured using 3D printing
• Resistant to UV rays and temperatures up to approx. 80° C

Equip the popular Baader Diamond Steeltrack focusers with the Toup Tek AAF motor focus system.

• Suitable for Baader Diamond Steeltrack focusers
• Enables the use of the AAF motor focus system from Toup Tek
• Manufactured using 3D printing
• Resistant to UV rays and temperatures up to approx. 80° C

Equip the popular Skywatcher Evolux 62 and 82 focusers with the Toup Tek AAF motor focus system.

• Suitable for Skywatcher Evolux 62ED and 82ED refractor focusers
• Enables the use of the AAF motor focus system from Toup Tek
• Manufactured using 3D printing
• Resistant to UV rays and temperatures up to approx. 80° C
• The Skywatcher 62ED and the Toup Tek AAF are not included in the scope of delivery

Attach the ASKAR FMA180 pro to mounts, attach a viewfinder, and focus motorized with the ZWO EAF focus motor.

• Created using 3D printing technology
• Suitable for the APO telephoto lens FMA180 pro from Askar
• Enables the use of ZWO EAF focus motors
• Lightweight plastic design, metal screws
• Dimensionally stable up to 80 °C thanks to the use of PETG in 3D printing
• Includes mounting kit with fastening materials, but no tools, telescope, or motor unit

• Built-in temperature sensor
• Zero backlash
• Manual adjustment
• Position memorizing during power off

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

Proudly standing between Pocket and Ultimate Powerbox, it has been designed to provide more advanced features than Pocket Powerbox in a more compact / quality design.

• 4 x 12 V DC power outlets for your equipment (a single channel to switch all four outputs ON/OFF via software)
• 12 amps of total distributed current
• Adjustable output (3, 5, 8, 9, 12 V) / 3 A (can be switched ON/OFF) - power your DSLR / mirrorless camera
• Embedded powered USB3 hub ? 4 x USB3 ports or 3 x USB2 ports available
• 1 x power USB port (up to 3 amps) ? suitable for powering Raspberry PI 3/4
• Port (RJ12) for external accessories (like external focus controller)
• 2 channels with PWM for dew heaters ? RCA outputs (tune levels via software)
• Humidity and temperature sensor (included)
• Auto tune dew heater channels
• Reverse polarity protection
• USB / PC controlled or standalone pperation out of the box
• Lightweight and extremely compact aluminium enclosure

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

With its coaxial power connector 5.5/2.5 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

With its coaxial power connector 5.5/2.5 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

Focus fast, reliably and accurately your telescope using a stepper or DC motor and this controller.

• versatile, you can use your own motor instead of having to use one of PegasusAstro - and using another motor requires (perhaps) another cable, not another controller
• PC operation is standard, but manual operation does not even need a separate hand controller
• Temperature probe included
• Backlash compensation possible via firmware
• ASCOM and INDI compliant, but comes with a standalone program for Windows
• Firmware upgrade possible

This geared stepper motor has 0.0625° steps, 60 Ncm torque and little backlash, so you can focus your telescope fast and accurately with it - even with heavy imaging equipment.

• Useful resolution of 0.0625° (3.75 arc min) per step
• High torque for handling higher loads
• Low backlash making backlash compensation easier
• RJ45 socket allows using standard network cable for connecting to PegasusAstro´s Dual Motor Focus Controller
• Universal L Shaped Bracket allows mechanical connection to many focusers
• Supplied couplers allow mechanical connection to many focusing shafts

This device is a practical power supply for the "grab and go" astrophotographer who does not want too much automation.

• 4 x 12 V DC power outlets for your equipment (ON/OFF via software)
• 10 amps of total power
• DSLR output (can be switched ON/OFF)
• 2 channels with PWM for dew heaters RCA outputs (tune levels via software)
• Humidity and temperature sensor (included)
• Auto tune dew heaters
• Reverse polarity protection
• USB / PC controlled or standalone operation out of the box
• Lightweight and extremely compact enclosure

Equip the 3.7" TS-Optics rack and pinion focuser with the ZWO EAF motor focus system.

• Suitable for 3.7" TSFOCR, focusers and telescopes equipped with these focusers
• Allows the use of the EAF motorfocus system from ZWO
• Includes the complete mount, you do not need any accessories
• Simple and self-explanatory mounting
• Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
• Eyepiece focuser and motor focus are not included in the scope of delivery

Equip the 2.5" RAP focuser from TS-Optics with the ZWO EAF motor focus system.

• Suitable for all 2.5" TSFOCR25, TSFOCR25S and TSFOCR25-117 focusers and telescopes equipped with these focusers
• Allows the use of the EAF motor focus system from ZWO
• Includes the complete mounting, you do not need any accessories
• Simple and self-explanatory mounting
• Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
• Eyepiece extension and motor focus are not included in the scope of delivery

• Suitable for UNCN2-G2 and TSRPN2 focusers
• Enables the use of the EAF motor focus system from ZWO
• Elaborate and elegant adaptation to the focuser
• Simple and self-explanatory mounting
• Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing

Equip the 2" Crayford focuser from TS-Optics with the ZWO EAF motor focus system.

• Suitable for all 2" Crayford focusers and telescopes equipped with these focusers, e.g. TS-Photon Newtons
• Fits to the Crayford focusers with and without micro-reduction
• Allows the use of the EAF motor focus system from ZWO
• Elaborate and elegant adaptation to the focuser
• Includes mounting adapter and screw
• Simple and self-explanatory mounting incl. mounting instructions
• Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing

• Suitable for all 2" Monorail focusers and telescopes equipped with these focusers
• Allows the use of the EAF motorfocus system from ZWO
• Includes mounting adapter and four screws
• Simple and self-explanatory assembly, you will receive the assembly instructions after your purchase in an environmentally friendly PDF format
• Dimensionally stable up to 90 °C due to the use of PETG for 3D printing

Equip the 3" MONORAIL focuser from TS-Optics with the ZWO EAF motor focus system.

• Suitable for all 3" Monorail focusers and telescopes equipped with these focusers
• Suitable for all TS-Optics RC and Cassegrain telescopes with 10" aperture and larger
• Allows the use of the EAF motor focus system from ZWO
• Includes mounting adapter and four screws
• Easy and self-explanatory mounting, you will receive the mounting instructions after your purchase in an environmentally friendly PDF format
• Dimensionally stable up to 90 °C due to the use of PETG in 3D printing

This hand controller allows precise manual focus, vibration free!

• Focusing with a rotary knob, thus intuitive
• Two speeds, slow precision mode is active if the knob is pressed inside
  Speed indicators
• Standard network cable with RJ45 plugs for connection
• Can work simultaneously with the PC operation