Mounts & Tripods

iOptron 5 kg counterweight with central bore diameter 28.28 mm

• Weight: 5 kg
  
• Inner diameter: 28.5 mm
• Fits: iOptron CEM70, CEM60, CEM60EC, iEQ45, iEQ45 Pro, Gem45
  

iOptron 5 kg counterweight with central bore diameter 28.28 mm

• Weight: 2.5 kg
  
• Inner diameter: 28.5 mm
• Fits: iOptron CEM70, CEM60, CEM60EC, iEQ45, iEQ45 Pro, Gem45
  

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• High-precision stepper motors for precise positioning and tracking
• Optical encoders allow Realtime PEC
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 0.3 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• iGuider built in Autoguider
  
• High-precision stepper motors for precise positioning and tracking
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 3.5 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

The mobile mount iOptron CEM 70 is a further development of the proven CEM60 with even higher load capacity

• Payload up to 31.8 kg
• Weight of the head 13.6 kg
• Lattitude adjustment range 0°-70°
• Maximum slew speed 3.75 °/sec
• Integrated iPolar electronic polar finder
• High-precision stepper motors for precise positioning and tracking
• Go2Nova 8407 hand controller with built-in heater
• PEC +/- 3.5 arcseconds - further improvement of tracking by Permanent PEC
• 32-channel GPS
• Integrated ST-4 level autoguider interface
• Cables are installed in the mount
• Quick release coupling suitable for Losmandy and Vixen/EQ5 style dovetail bars
• Delivery in aluminum transport case

Computer-controlled equatorial WLAN GoTo mount for all latitudes

• The EQ-AL55i is fully controlled via a smart device using the built-in WLAN module using the freeware "SynScan Pro App" for iOS and Androidcontrolled.
• Application at all latitudes from 0-90 degrees

The adapter allows the iOptron # 3339 to be connected to CEM120 mounts.

• 3340A-120 connection adapter iOptron iPolar
• Suitable for CEM120 mounts
• Mount and electronic polar finder are not included in the scope of delivery

The iOptron iPolar replaces the polar alignment scope and guarantees the most accurate alignment of your mount.

• This Polar Finder fits all iOptron CEM120 mounts
• The image is generated via a lens, the sky region is projected onto a sensitive CMOS sensor and evaluated via intelligent software.
• A large field of view of 13° guarantees that the celestial pole is already detected at the sensor, even if only coarsely polar aligned
• USB Plug and Play - no driver required
• Works in the northern and southern hemisphere.
• Perfect polar alignment for best possible tracking accuracy is achieved.
• The electronic polar finder comes without mount adaption

iOptron # 7300 CEM120 An extraordinary innovation in mount design...Now with a new payload!

• A new design, center-balanced equatorial mount (CEM) for maximum payload with natural stability
• Payload of 115 lbs (52 kg) with the mount weight of 57 lbs (26 kg)
• Precision stepper motor with 0.07 arcsec accuracy for precise GOTO and accurate tracking
• Polar alignment routine for those who can´t see the Pole Star
• Go2Nova® 8407 V2 controller with Advanced GOTONOVA® GOTO Technology
• High precision tracking with low periodic error (PE)<±3.5 arcsec and permanent periodic error correction
• Built-in WiFi and LAN for remote operation
• Integrated ST-4 autoguiding port and GPS
• Losmandy Level telescope connection

iOptron # 7300 CEM120 An extraordinary innovation in mount design...Now with a new payload!

• A new design, center-balanced equatorial mount (CEM) for maximum payload with natural stability
• Payload of 115 lbs (52 kg) with the mount weight of 57 lbs (26 kg)
• Precision stepper motor with 0.07 arcsec accuracy for precise GOTO and accurate tracking
• Polar alignment routine for those who can´t see the Pole Star
• Go2Nova® 8407 V2 controller with Advanced GOTONOVA® GOTO Technology
• High precision tracking with low periodic error (PE)<±3.5 arcsec and permanent periodic error correction
• Built-in WiFi and LAN for remote operation
• Integrated ST-4 autoguiding port and GPS
• Losmandy Level telescope connection