Autoguider Systems

PegasusAstro Falcon V2 Camera Field Rotator

The image field rotator is very easy to operate via ASCOM drivers or stand-alone software and makes astrophotography easier for you by automatically and precisely setting the desired camera orientation.

• 6 kg payload, but only 0.7 kg weight
• M68 connections avoid vignetting of large sensors
• Numerous adapters available for common threads
• Requires only 15.5 mm back focus
• Support for Alt-AZ field derotation
• USB-C connection: single cable for power and data.
• Wi-Fi enabled: Hotspot and 2.4 GHz wireless client support.
• Utilizes ASCOM and Indi
• Sturdy aluminum body

Automatisches Alignment ohne Aufsuchen von Referenzsternen mit höchster Genauigkeit - nun auch für Skywatcher GoTo-Montierungen.

•  Mit diesem StarSense Modul können Sie den Alignment-Prozess (Ausrichtung am Nachthimmel) Ihrer Skywatcher Montierung automatisieren.
•  StarSense übernimmt das komplette Alignment Ihrer Skywatcher Montierung, Sie können nach wenigen Minuten mit dem Beobachten beginnen.
•  StarSense ersetzt den orginalen Skywatcher Handkontroller - Sie können Ihre Skywatcher GoTo-Montierung mit der bewährten Celestron Ansteuerung ausstatten.
•  Das Kit besteht aus drei Teilen: StarSense Kamera mit Sucherbasis, StarSense Interface-Box und Celestron GoTo-Handcontroller

This off-axis guider from ASKAR convinces with a versatile adaptation for almost all telescopes and cameras - usable up to full frame format.

•  Connections at the telescope side: M54x0.75, M48x0.75 and T2 (M42x0.75) female thread
•  Connections at the camera side: M54x0.75, M48x0.75 and T2 (M42x0.75) male thread
•  Three orientations of the camera to the off-axis guider are possible
•  The optically effective length of the OAG is 19.5 mm, the external thread on the camera side does not count.
•  Sufficient space for a filter wheel or filter drawer between OAG and the camera, also for correctors with 55 mm working distance
•  Side mount 1.25" connector and T2 male thread with fine focusing - always a sharp guiding star
•  Large 10x10 mm prism for a large field for the autoguider
•  Prism with prism holder can be adjusted for best possible illumination

This device has 6 x USB 3.1 Ports. All ports are backwards compatible with USB 1.0 and USB 2.0 devices. Moreover, each port can deliver up to 2.5 A of current.

• Ports switchable (power and data), ASCOM supported
• Current of every port is monitored
• Hub supplied with 12 to 14 V
• Supports industrial grade temperature range from -40 °C to +85 °C
• Robust aluminum enclosure

Very easy to operate via ASCOM drivers or standalone software, it will make your life easier by automatically adjusting your camera field with precision.

• 6 kg payload, but only 0.7 kg weight
• M54 connections avoid vignetting of large sensors
• Comes with adaptors for 2" receptacles and M48 camera rings
• Needs only 19 mm back focus
• Controlled via USB 2.0, no proprietary cable needed
• Uses ASCOM 6 for control, INDI support will follow
• Aluminum design increases rigidity