noctutec
noctutec
Target for OCAL collimators
12.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Easier for beginners, certainty for professionals! The completely redesigned and revolutionary collimator version 3.0 for your telescope. The market continues to develop towards short focal lengths and highly sensitive cameras with extremely small pixel sizes. This increases the requirements for a clean telescope alignment. The Ocal collimator is an innovative tool, which facilitates the adjustment in a completely new way. Each Ocal collimator has an internal motor that moves the CMOS chip linearly. Via the software, the focus can thus be ideally adjusted to the individual areas of the alignment. So you can focus on any area in the telescope without touching the setup or imagetrain. Colored centering circles can be selected and adjusted via the included software. The software also controls the line width of the circles as well as the contrast and exposure of the live image. Last but not least, a fade cross can be switched on and rotated via software. In this way, all areas that are important for the adjustment can be brought into focus and concentrically aligned very precisely. With the alignment of the crosshairs, the exact linear alignment of the trap can be assessed. Scope of delivery: OCAL 3.0 Connection cable 2x adapter Closing cap
Item condition: new, but not original packed
Item condition: new, but not original packed
289.00 € 229.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The OCAL Collimator Version 4.0 is a further development of the popular OCAL V3.0, OCAL PRO and 3.0 MAX collimators. The accuracy of the devices has been further improved. Thanks to enhanced optics and state-of-the-art manufacturing processes, the OCAL V4.0 now covers all focal lengths. In addition, we have managed to launch the OCAL 4.0 at a slightly lower price.
- The new Version 4.0 of the OCAL collimator uses a larger front lens and a CMOS sensor. The new sensor is significantly more light-sensitive and has smaller pixels. This allows for adjustment even in darker conditions. If the image is too bright, you can reduce the brightness by adjusting the gain and exposure time.
- Resolution and imaging performance have been further improved compared to all previous models.
- Unlike the earliest previous versions, the OCAL V4.0 features a decoupled, industrial-grade camera module. This camera module is no longer connected to the circuit board. A completely new manufacturing technique allows this module to be fitted into the OCAL MAX housing with the utmost precision. The tolerance during assembly is just 0.05 mm!
- The improved optics of the OCAL Version 4.0 ensure that critical areas can now be brought into focus even more effectively.
- The central area around the OCAL’s lens is now easier to distinguish from the background. This enables precise adjustment even under difficult conditions, such as when a centre mark obscures the lens. To this end, an additional black ring has now been fitted inside the housing specifically for this purpose.
- The clarity of the image has been significantly improved. Particularly when a corrector is attached, the image quality is now considerably better than on previous models.
- Suitable for Windows, Android and Apple Mac.
289.00 €
Estimated delivery time : 3-4 days (valid for new orders)
