Visual Back T2 to 1.25" - with additional T2 male thread - long The Additional T-2 Male Thread offers many additional possibilities. For example you can attach T2 extension tubes and then use the adapter for eyepiece projection. Please see "recommended accessories" for options.
Item condition: used Item with possible small cosmetic deffect, but every function works perfect
Wichtiger Hinweis zur Mehrwertsteuer: Dieses Angebot unterliegt mit Ausnahme der Versandkosten gemäß § 25a UStG der Differenzbesteuerung, weshalb auf den angebotenen Artikel keine Umsatzsteuer erhoben und ausgewiesen wird.
TS Optics Adaptor M42x1 female / EOS EF Bayonet with 0 mm optical length This adaptor screws directly into the Canon EOS body and enables you to connect objectives with M42x1 thread. Please note: The adapter does NOT work with M42 lenses with a very large diameter, e.g. MTO1000, Rubinar 500 and Rubinar 300
TS-Optics adapter from 2" to 1,25" - 2" filterthread - compression ring This standard adaptor allows you to use 1.25" accessories on a 2" focuser or 2" adaptor. The accessories are held securely in place through a brass compression ring. This not only provides a firm grip, but also prevents scratches.
Starpointer - LED illuminated dot finder with universal mount Lightweight and compact finder. The Starpointer LED illuminated dot finder is compact and lightweight - an optimal alternative to optical finder telescopes when it comes to weight and flexible use. In addition, the Starpointer is also a complement to an optical viewfinder. With the illuminated viewfinder, the whole sky is at your disposal for orientation; within seconds you are in the desired area of the sky. The optical viewfinder, on the other hand, offers a smaller field of view and can be used for fine alignment. Two knurled screws allow you to align the illuminated dot finder exactly parallel to the telescope. You can switch on the illuminated dot and adjust the brightness via the rotary knob. The versatile base The Starpointer is supplied with a flexible base with two slotted holes. This makes it possible to adapt the Starpointer to all tubes from 70mm outer diameter to flat support surfaces. The spacing of the oblong holes is suitable for hole spacing from 18 to 26mm.