Secondhand & Stock

TS - Adapter of the SC thread on 2 ''

Item condition: new and original packed

TS - Adapter of the standard T-2 thread (M-42 x 0.75) on 2" The adapter allows connecting 2" accessories to devices or adapters with T2 connection: - Telephoto lenses - Focusers with T2-thread - Adapters with male T2-thread The adaptor can easily be screwed onto any T2 male thread. The 2" accessory is clamped via a brass compression ring and thus over a large area, thus pressure marks or tilting are avoided.

Item condition: new and original packed

HR - 5 mm Planetary eyepiece High Resolution, Long Eye Relief, Wide Angle Planetary Eyepieces

Item condition: new and original packed

TS - extension M69 (TS 2.5" Flattner / Guider)

Item condition: new, but not original packed

TS 3.2 mm 1.25" ED flat field eyepiece - long eye relief

Item condition: new, but not original packed

TS 2" Newtonian Coma Corrector

Item condition: used Item with possible small cosmetic deffect, but every function works perfect

Wichtiger Hinweis zur Mehrwertsteuer:
Dieses Angebot unterliegt mit Ausnahme der Versandkosten gemäß § 25a UStG der Differenzbesteuerung, weshalb auf den angebotenen Artikel keine Umsatzsteuer erhoben und ausgewiesen wird.

TS Adapter from Starlight 3" Focuser FTF30 to M68x1 Zeiss Level thread

Item condition: new and original packed

Product description Classy CNC Tube Rings with elegant design and uncompromising quality A beautiful telescope should be attached to the mount with perfect tube rings, too. Here, a beautiful look is as much in demand as gut technical properties. The CNC tube rings fulfill these requirements. The tube has only 8 mm distance to the bottom side of the rings, thus the mount is not additionally loaded by unnecessarily long levers. The tubes have plane support surfaces on both sides with five female M6 threads on each side. 1 M6 thread in the middle, 2 M6 threads at a distance of 19 mm from the middle, 2 M6 threads at a distance of 30mm from the middle. With this, you can easily attach dovetail bars and accessories. With only 5 mm thickness, the rings are lightweight yet very stable A thin layer of felt was put on the inside of the tube rings for avoiding scratches. However, the tube is clamped very well in the rings and does not change position. That is important if a guiding scope is attached to the rings. Delivery contents Set of 2x Aluminium CNC Tube Rings

Item condition: new and original packed

TS Optics Non rotating helical focuser with M48 connection A true helical focuser like this works like a camera objective - when you turn the focusing ring, neither the lens nor the camera (or eyepiece and diagonal) will rotate. The only motion is in and out. The advantage of this helical focuser is the fine adjustment, possible in part due to the fine pitch of the focusing ring's thread, and in part due to the large diameter of the ring. In the case of this helical focuser, virtually backlash-free movement and graduated markings on the focusers allow repeatable return to the focus point simply by noting the focus position reading. Advantages at a glance no rotation of the diagonal or camera - the only motion is in and out precisely adjustable limitedly self-locking wide focus range: 40 mm 51 mm minimum height, 91 mm maximum height easy adaption to the telescope tube and the camera good solution for telescope or objective self construction M48x0.75 (2" filter) threads at both sides, with all adaption possibilities generous clear aperture of 45 mm also suitable as variable M48 extension 51 mm to 91 mm for the perfect working distance two screws for locking the drawtube Wide focussing range and short length The Helical focuser has a wide focussing range of 40 mm, but it is very short, with a minimum height of only 51 mm. So you can use the focuser on telescopes or telephoto lenses with little space to the focus point, like Newtonians. Accessories This focuser is not suitable for heavy accessories, it will tilt. The main use is with small CCD cameras for planetary photography, 1.25" eyepieces and lightweight 2" eyepieces. Delivery contents Helical Focuser with 2 locking screws

Item condition: new, but not original packed

TS Optics 3mm extension with M48 - 2" filter thread and 2" diameter

Item condition: new and original packed

TS 1,25" Premium Barlow Lens - 5x magification - 4-element

Item condition: new and original packed

TS Optics 6 mm Planetary HR - 1.25" Eyepiece, 58°, fully multi-coated

Item condition: new and original packed