Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
Dual speed Pinion Assembly upgrade for 1.25" Feather Touch single speed focuser.
307.00 €
Estimated delivery time : 1-4 days
Starlight A35-503TMB---Adapter 3.5" for TMB130 TelescopesScope specific tube adapter to attach 3.5" Feather Touch focuser onto TMB130 telescopes
307.00 €
Estimated delivery time : 1-4 days
Curved base with leveling screws for 2.0" diameter Feather Touch focuser ... for Vixen Newtonian Telescope R200SS
319.00 €
Estimated delivery time : 3-4 days
Proudly standing between Pocket and Ultimate Powerbox, it has been designed to provide more advanced features than Pocket Powerbox in a more compact / quality design.
- 4 x 12 V DC power outlets for your equipment (a single channel to switch all four outputs ON/OFF via software)
- 12 amps of total distributed current
- Adjustable output (3, 5, 8, 9, 12 V) / 3 A (can be switched ON/OFF) - power your DSLR / mirrorless camera
- Embedded powered USB3 hub ? 4 x USB3 ports or 3 x USB2 ports available
- 1 x power USB port (up to 3 amps) ? suitable for powering Raspberry PI 3/4
- Port (RJ12) for external accessories (like external focus controller)
- 2 channels with PWM for dew heaters ? RCA outputs (tune levels via software)
- Humidity and temperature sensor (included)
- Auto tune dew heater channels
- Reverse polarity protection
- USB / PC controlled or standalone pperation out of the box
- Lightweight and extremely compact aluminium enclosure
319.00 €
Estimated delivery time : 1-4 days
This end cap fits the Feather Touch 3.5" focusers and has a 3.5" compression ring opening which 3 machined thumb screws.
323.00 €
Estimated delivery time : 1-4 weeks
Tecnosky 2" precision rack-and-pinion focuser, suitable for heavy loads without flexing. 60mm Travel version
- 2" CNC focuser
- 10 bearings in total
- zero deflection
- maximum load 4 kg
- cross-tooth rack
- low profile 44mm
- weight 740 grams
- compatible with EAF motors, Pegasus, Tecnosky etc.
- 60mm excursion
330.00 €
Estimated delivery time : 1 week
ZWO´s motor focus allows precise motorized focusing of your telescope for astrophotography and observation.
336.00 €
Estimated delivery time : 1-4 days
Curved base with leveling screws for 3.5" diameter Feather Touch focuser
338.00 €
Estimated delivery time : 3-4 days
The completely new construction combines extreme durability and precision with high payload!
345.00 €
Estimated delivery time : 1-4 days
Versatile Motor Focus from PrimaLucelab with adaption to many focusers
- Outstanding precision of 0.7 microns/step
- Compatible to a wide range of focusers, often without external brackets
- Controlled by PC via USB-C (reversible) or tablet/smartphone via its own WiFi network
- Motor and electronics are fully integrated into the casing
- Dimmable status LEDs can even be turned off and are helpful at night
- Compact dimensions of 87.5 x 60 x 43 mm
- Included: configuration software with extensive control options, available via download
- ASCOM driver allows control with all conventional astro software
Works especially fine with the ARCO camera rotator - Can be supplied with a temperature probe for automatic focus correction
349.00 €
Estimated delivery time : 1-4 days
With this focuser you can easily replace your old model and upgrade to the new 2" R&P version with 8 bearings. The focuser can be loaded with up to 5 kg.
Key data:
Key data:
- 35mm focussing travel
- Load capacity up to 5 kg
- 1:10 reduction ratio
- Weight 700g
- Suitable for Skywatcher Newtonian telescopes
- Incl. Skywatcher adapter (round adapter/ notch adapter)
359.00 €
Estimated delivery time : 1 week
Transforms the LS100MT into a 3-lens ED Apo for observation & photography of moon, planets & deep-sky
379.00 €
Estimated delivery time : 1-2 months
