Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
SC 3.3? adapter for ESATTO 2" allows you to connect the ESATTO 2" focuser to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models.
- Telescope side connection 3.3" SC thread
- Focuser side connection specific for PrimaLuce ESATTO 2"
- Only 2 mm reduction of back focus
Adapt the EAF motorized focus to Starlight Feather Touch True 3.2 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.2” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
Astroprints adapter for Toup Tek AAF motorized focus on Starlight Instruments Feather Touch focusers
Adapt the Toup Tek AAF motor focus to Starlight Feather Touch focusers with this adapter
- Compatible with all Toup Tek AAF motor focuses
- Compatible with all Starlight FTF 2“, 2.5” and 3" focusers
- Manufactured using 3D printing
- Resistant to UV rays and temperatures up to approx. 80° C
Item condition: new and original packed
Adapt the EAF motorized focus to Starlight Feather Touch True 3.5 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.5” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
This hand controller allows precise manual focus, vibration free!
- Focusing with a rotary knob, thus intuitive
- Two speeds, slow precision mode is active if the knob is pressed inside
Speed indicators - Standard network cable with RJ45 plugs for connection
- Can work simultaneously with the PC operation
The highlights at a glance:
- Ball bearing 2" focuser: optimise your telescope with a more precise focuser for observation and photography
- Easy focusing: so you will be able to focus fast and not overshoot the target
- Adjustable: the friction can be adjusted
- 1kg load capacity. In addition, you can use the locking screw to fix the focus at any time if it should no longer deviate from the current setting.
- Focus on the point even at higher magnification
- 78mm diameter connector
- 59mm draw tube travel
- Height: 76mm to 2" adapter
- Incl. 2" to 1.25" adapter with filter thread (only 3mm optical travel)
- Weight 492g
