Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
Adapt the EAF motorized focus to Starlight Feather Touch True 3.2 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.2” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
Astroprints adapter for Toup Tek AAF motorized focus on Starlight Instruments Feather Touch focusers
Adapt the Toup Tek AAF motor focus to Starlight Feather Touch focusers with this adapter
- Compatible with all Toup Tek AAF motor focuses
- Compatible with all Starlight FTF 2“, 2.5” and 3" focusers
- Manufactured using 3D printing
- Resistant to UV rays and temperatures up to approx. 80° C
SC 3.3? adapter for ESATTO 2" allows you to connect the ESATTO 2" focuser to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models.
- Telescope side connection 3.3" SC thread
- Focuser side connection specific for PrimaLuce ESATTO 2"
- Only 2 mm reduction of back focus
Item condition: new and original packed
Adapt the EAF motorized focus to Starlight Feather Touch True 3.5 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.5” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
This hand controller allows precise manual focus, vibration free!
- Focusing with a rotary knob, thus intuitive
- Two speeds, slow precision mode is active if the knob is pressed inside
Speed indicators - Standard network cable with RJ45 plugs for connection
- Can work simultaneously with the PC operation
The highlights at a glance:
- Ball bearing 2" focuser: optimise your telescope with a more precise focuser for observation and photography
- Easy focusing: so you will be able to focus fast and not overshoot the target
- Adjustable: the friction can be adjusted
- 1kg load capacity. In addition, you can use the locking screw to fix the focus at any time if it should no longer deviate from the current setting.
- Focus on the point even at higher magnification
- 78mm diameter connector
- 59mm draw tube travel
- Height: 76mm to 2" adapter
- Incl. 2" to 1.25" adapter with filter thread (only 3mm optical travel)
- Weight 492g
