Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
Equip the 2.5" RAP focuser from TS-Optics with the ZWO EAF motor focus system.
- Suitable for all 2.5" TSFOCR25, TSFOCR25S and TSFOCR25-117 focusers and telescopes equipped with these focusers
- Allows the use of the EAF motor focus system from ZWO
- Includes the complete mounting, you do not need any accessories
- Simple and self-explanatory mounting
- Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
- Eyepiece extension and motor focus are not included in the scope of delivery
Equip the 3.7" TS-Optics rack and pinion focuser with the ZWO EAF motor focus system.
- Suitable for 3.7" TSFOCR, focusers and telescopes equipped with these focusers
- Allows the use of the EAF motorfocus system from ZWO
- Includes the complete mount, you do not need any accessories
- Simple and self-explanatory mounting
- Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
- Eyepiece focuser and motor focus are not included in the scope of delivery
Equip the 3" RAP focuser from popular manufacturers such as TS-Optics, Omegon, APM, etc. with the Toup Tek for AAF motor focus syste.
- Suitable for all 3" FOCR30, FOCR30S focusers and telescopes equipped with these focusers
- Enables the use of the Toup Tek AAF motor focus system
- Includes all mounting hardware; no additional accessories required
- Simple and self-explanatory installation
- Focuser and motor focus are not included in the scope of delivery
Equip the popular Skywatcher Evolux 62 and 82 focusers with the Toup Tek AAF motor focus system.
- Suitable for Skywatcher Evolux 62ED and 82ED refractor focusers
- Enables the use of the AAF motor focus system from Toup Tek
- Manufactured using 3D printing
- Resistant to UV rays and temperatures up to approx. 80° C
- The Skywatcher 62ED and the Toup Tek AAF are not included in the scope of delivery
Equip the popular Baader Diamond Steeltrack focusers with the Toup Tek AAF motor focus system.
- Suitable for Baader Diamond Steeltrack focusers
- Enables the use of the AAF motor focus system from Toup Tek
- Manufactured using 3D printing
- Resistant to UV rays and temperatures up to approx. 80° C
Equip the popular UNCN2-G2 und TSRPN2 focusers with the Toup Tek AAF motor focus system.
- Suitable for UNCN2-G2 und TSRPN2 focusers
- Enables the use of the AAF motor focus system from Toup Tek
- Manufactured using 3D printing
- Resistant to UV rays and temperatures up to approx. 80° C
Equip the 3.7" rack and pinion focuser from TS-Optics with the Toup Tek AAF motor focus system.
- Suitable for 3.7" FOCR, focusers, and telescopes equipped with these focusers
- Enables the use of the Toup Tek AAF motor focus system
- Includes all mounting hardware, no additional accessories required
- Simple and self-explanatory installation
- Dimensionally stable up to 80 °C thanks to the use of PETG in 3D printing
- Eyepiece focuser and motor focus are not included in the scope of delive
Equip the 2.5" RAP focusers from popular manufacturers such as TS-Optics, Omegon, APM, etc. with the Toup Tek for AAF motor focus system.
- Suitable for all 2.5" FOCR25, FOCR25S, and FOCR25-117 focusers and telescopes equipped with these focusers
- Enables the use of the Toup Tek AAF motor focus system
- Includes all mounting hardware; no additional accessories required
- Simple and self-explanatory assembly
- Dimensionally stable up to 80 °C thanks to the use of PETG in 3D printing
- Eyepiece extension and motor focus are not included in the scope of delivery
With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
