Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
Equip the 3.7" TS-Optics rack and pinion focuser with the ZWO EAF motor focus system.
- Suitable for 3.7" TSFOCR, focusers and telescopes equipped with these focusers
- Allows the use of the EAF motorfocus system from ZWO
- Includes the complete mount, you do not need any accessories
- Simple and self-explanatory mounting
- Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
- Eyepiece focuser and motor focus are not included in the scope of delivery
Equip the 2.5" RAP focuser from TS-Optics with the ZWO EAF motor focus system.
- Suitable for all 2.5" TSFOCR25, TSFOCR25S and TSFOCR25-117 focusers and telescopes equipped with these focusers
- Allows the use of the EAF motor focus system from ZWO
- Includes the complete mounting, you do not need any accessories
- Simple and self-explanatory mounting
- Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
- Eyepiece extension and motor focus are not included in the scope of delivery
The highlights at a glance:
- Ball bearing 2" focuser: optimise your telescope with a more precise focuser for observation and photography
- Easy focusing: so you will be able to focus fast and not overshoot the target
- Adjustable: the friction can be adjusted
- 1kg load capacity. In addition, you can use the locking screw to fix the focus at any time if it should no longer deviate from the current setting.
- Focus on the point even at higher magnification
- 78mm diameter connector
- 59mm draw tube travel
- Height: 76mm to 2" adapter
- Incl. 2" to 1.25" adapter with filter thread (only 3mm optical travel)
- Weight 492g
This hand controller allows precise manual focus, vibration free!
- Focusing with a rotary knob, thus intuitive
- Two speeds, slow precision mode is active if the knob is pressed inside
Speed indicators - Standard network cable with RJ45 plugs for connection
- Can work simultaneously with the PC operation
Adapt the EAF motorized focus to Starlight Feather Touch True 3.5 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.5” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
Item condition: new and original packed
SC 3.3? adapter for ESATTO 2" allows you to connect the ESATTO 2" focuser to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models.
- Telescope side connection 3.3" SC thread
- Focuser side connection specific for PrimaLuce ESATTO 2"
- Only 2 mm reduction of back focus
Adapt the EAF motorized focus to Starlight Feather Touch True 3.2 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.2” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
