Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
Starlight RISER for 2,5" Feather Touch 1.25" length This riser is attached to the OTA side of the focuser. The riser fits all FTF25xx focuser.Delivered with: Starlight RISER for 2,5" Feather Touch 1.25" length
246.00 €
Estimated delivery time : 3-4 days
Starlight RISER for 3" Feather Touch - 2.25" length This riser is attached to the OTA side of the focuser. The riser fits all FTF30xx focuser.Delivered with: Starlight RISER for 3" Feather Touch - 2.25" length
246.00 €
Estimated delivery time : 1-4 days
Starlight RISER for 2,5" Feather Touch - 2.25" length This riser is attached to the OTA side of the focuser. The riser fits all FTF25xx focuser.Delivered with: Starlight RISER for 2,5" Feather Touch - 2.25" length
246.00 €
Estimated delivery time : 1-4 days
This device is a practical power supply for the "grab and go" astrophotographer who does not want too much automation.
- 4 x 12 V DC power outlets for your equipment (ON/OFF via software)
- 10 amps of total power
- DSLR output (can be switched ON/OFF)
- 2 channels with PWM for dew heaters RCA outputs (tune levels via software)
- Humidity and temperature sensor (included)
- Auto tune dew heaters
- Reverse polarity protection
- USB / PC controlled or standalone operation out of the box
- Lightweight and extremely compact enclosure
242.00 €
Estimated delivery time : 1-4 days
This end cap fits the 3.5" Feather Touch focusers and allows the adaption of 2" accessories to this focuser.
- Eyepiece connection: 2" with compression ring and 3 machined thumb screws
- Focuser connection: female thread - fits the big male thread of the FTF35XX focuser
233.00 €
Estimated delivery time : 3-4 days
This end cap fits the 3" Feather Touch focusers and allows the adaption of 2" accessories to this focuser.
230.00 €
Estimated delivery time : 3-4 days
This end cap fits the 2.5" Feather Touch focusers and allows the adaption of 2" accessories to this focuser.
230.00 €
Estimated delivery time : 3-4 days
Starlight RISER for 3,5" Feather Touch - 3.35" length This riser is attached to the OTA side of the focuser. The riser fits all FTF35xx focuser.Delivered with: Starlight RISER for 3,5" Feather Touch - 3.35" length
230.00 €
Estimated delivery time : 1-4 weeks
Starlight flat Base for 3" Feather Touch with leveling screws Flat base with leveling screws for 3.0" diameter Feather Touch focuser
230.00 €
Estimated delivery time : 3-4 days
This iOptron Electronic Automatic Focuser (iEAF) is designed for both Crayford and Rack-and-Pinion focusers.
Built-in temperature sensor Zero backlash Manual adjustment Position memorizing during power off
229.00 €
Estimated delivery time : 1-4 weeks
This end cap fits the TRUE 3.0" Feather Touch focusers and allows the adaption of 3" accessories to this focuser.
226.00 €
Estimated delivery time : 3-4 days
![Picture of DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS](https://www.apm-telescopes.net/images/thumbs/0008767_2_crayford_fokussierer_fuer_newton_teleskop_20170_640.jpg "Show details for DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS")
DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS
239.00 € 221.07 €
Estimated delivery time : 1-4 days
