Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
The temperature sensor of DeepSkyDad allows precise control of the ambient temperature to maintain the focus position during temperature changes
26.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The motorized focusing is manufactured by DeepSkyDad for you and allows comfortable focusing without touching the telescope.
260.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The metal magnet ring for the homing sensor of the Steeldrive II fits to Baader Diamond Steeltrack focusers.
73.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The # 2957165 Steeldrive II is a high-precision motorised focuser drive for heavy loads - directly fitting to all Baader Steeltrack focusers.
665.00 €
Estimated delivery time : 1-4 days (valid for new orders)
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male M48 thread.
29.00 €
Estimated delivery time : 1-4 days (valid for new orders)
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male T2-thread.
27.00 €
Estimated delivery time : 1-4 days (valid for new orders)
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male M68 thread.
39.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The flat adapter plate is used for mounting the 2" BDS-NT Diamond Steeltrack to a flat surface.
42.00 €
Estimated delivery time : 1-4 days (valid for new orders)
High-quality 2" clamping, suitable for focusers with S58 dovetail ring, like Baader Diamond Steeltrack
85.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The completely new construction combines extreme durability and precision with high payload!
345.00 €
Estimated delivery time : 1-4 days (valid for new orders)
This adapter allows the connection of the Primalucelab SESTOSENSO 2 Motorfocus to focusers with 33 mm shaft diameter.
76.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Versatile Motor Focus from PrimaLucelab with adaption to many focusers
- Outstanding precision of 0.7 microns/step
- Compatible to a wide range of focusers, often without external brackets
- Controlled by PC via USB-C (reversible) or tablet/smartphone via its own WiFi network
- Motor and electronics are fully integrated into the casing
- Dimmable status LEDs can even be turned off and are helpful at night
- Compact dimensions of 87.5 x 60 x 43 mm
- Included: configuration software with extensive control options, available via download
- ASCOM driver allows control with all conventional astro software
Works especially fine with the ARCO camera rotator - Can be supplied with a temperature probe for automatic focus correction
269.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Transforms the LS100MT into a 3-lens ED Apo for observation & photography of moon, planets & deep-sky
379.00 €
Estimated delivery time : 1-2 months (valid for new orders)
Transforms the LS80MT into a 2-lens ED Apo for observation & photography of moon, planets & deep-sky
428.00 €
Estimated delivery time : 3-4 days (valid for new orders)
TS 2" Rack and Pinion RAP Focuser with SC Thread
299.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
This hand controller allows precise manual focus, vibration free!
- Focusing with a rotary knob, thus intuitive
- Two speeds, slow precision mode is active if the knob is pressed inside
Speed indicators - Standard network cable with RJ45 plugs for connection
- Can work simultaneously with the PC operation
76.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Adapter for Starlight 2" Focuser on C11 or C14 Telescopes
Item condition: new and original packed
Item condition: new and original packed
73.86 €
Estimated delivery time : 1-2 days (valid for new orders)
Starlight Dual speed Pinion Assembly upgrade for 1.25" Feather Touch single speed focuser.
Item condition: new and original packed
Item condition: new and original packed
200.00 €
Estimated delivery time : 2-4 weeks (valid for new orders)
Precise focusing of the camera lens and fixation of the position
89.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Precise focusing of the camera lens and fixation of the position
99.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The new FastLock eyepiece clamp M68a from APM is a solid and high-quality extension of your telescope or camera system.
59.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The new FastLock eyepiece clamp M48i from APM is a solid and high-quality extension of your telescope or camera system.
59.00 €
Estimated delivery time : 4-8 weeks (valid for new orders)
Adapter set between black TS RPA 20 focusers and MotorFocusLA, also for respective APM and similar
90.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Lacerta Motofocus Adaptor for TAKAHASHI, with both mounting plates for ALL common Takahashi focusers
90.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Adapter set between black FeatherTouch 3.0 focusers and MotorFocusLA
90.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Adapter set between black TS RPA 25 focusers and MotorFocusLA, also for respective APM and similar
90.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Adapter set between black FeatherTouch 3.5 focusers and MotorFocusLA
90.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Adapter set between Feathertouch 2 inch focusers and MotorFocusLA
90.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Lacerta Motorfosus MFOC
519.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Octo60 extender with centerlock-profile (12mm)
27.00 €
Estimated delivery time : 3-4 days (valid for new orders)
Lacerta OCTO-PLUS 2-inch eyepiece slide for Newton (guided on 8 ball bearings, with 1:10 microfocus unit and 2" self-centering eyepiece sleeve), for 8 inch tubes
439.00 €
Estimated delivery time : 1-2 days (valid for new orders)
Lacerta OCTO-PLUS 2-inch eyepiece slide for Newton (guided on 8 ball bearings, with 1:10 microfocus unit and 2" self-centering eyepiece sleeve), for 10inch tube
439.00 €
Estimated delivery time : 2-4 weeks (valid for new orders)
The FTF3545B-A is a high-end focuser for APO refractor telescopes or big RCs which are equipped with large 32 correctors for astrophotography.
- Draw tube travel 4.5" or 114.3 mm
- 100% correct position of of the image plane - the draw tube does not bend
- 89 mm clear aperture, enough to illuminate full-frame sensors
- Adjustment of the draw tube through rack and pinion. The tube itself is plain bearing mounted, using the combination stainless steel and Teflon.
- 3.5", 3" and 2" adapters are optional
1429.00 €
Estimated delivery time : 1-2 days (valid for new orders)
Starlight Instruments - Microdrive for Takahashi Focuser
662.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
SKYWATCHER FOCUSER
84.00 € 75.60 €
Estimated delivery time : 4 weeks (valid for new orders)
DUAL-SPEED 2" CRAYFORD FOCUSER FOR EXPLORER 150/200/250/300P NEWTONIAN REFLECTORS
195.00 € 175.50 €
Estimated delivery time : 4 weeks (valid for new orders)
DUAL-SPEED 2" CRAYFORD FOCUSER FOR SKY-WATCHER REFRACTORS
239.00 € 215.10 €
Estimated delivery time : 4 weeks (valid for new orders)
![Picture of DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS](https://www.apm-telescopes.net/images/thumbs/0008767_2_crayford_fokussierer_fuer_newton_teleskop_20170_640.jpg "Show details for DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS")
DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS
239.00 € 215.10 €
Estimated delivery time : 4 weeks (valid for new orders)
APM 3.7" Rack and Pinion Deluxe Focuser
595.00 €
Estimated delivery time : 4-8 weeks (valid for new orders)
APM deluxe eyepiece adapter 2"/1,25"
Item condition: new and original packed
Item condition: new and original packed
39.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Gear reduction 1:10 for 2.5" Messier Hexafoc focuser
99.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Dual speed Pinion Assembly upgrade for 1.25" Feather Touch single speed focuser.
307.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Feather Touch 1.25" Diameter Single Speed 0.75" Draw Tube Travel, Brake and Compression Ring.
392.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Feather Touch 1.25" Diameter Dual Speed 0.75" Draw Tube Travel, Brake and Compression Ring.
738.00 €
Estimated delivery time : 3-4 days (valid for new orders)
The ultra-lightweight 2" high-end focuser offers 50 mm of focusing travel and is suitable for DIY and telescope upgrade.
985.00 €
Estimated delivery time : 3-4 days (valid for new orders)
The DDC-2 (2"Desiccant Dust Cap) was designed by Starlight Instruments, LLC to help you protect your telescope from harmful moisture
107.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Protect your investment from dirt and dust with our new Feather Touch
61.00 €
Estimated delivery time : 2-3 days (valid for new orders)
Adapter for Starlight 2" Focuser on C11 or C14 Telescopes
154.00 €
Estimated delivery time : 2-3 days (valid for new orders)
