Focuser & Accessories

With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity

Focus fast, reliably and accurately your telescope using a stepper or DC motor and this controller.

• versatile, you can use your own motor instead of having to use one of PegasusAstro - and using another motor requires (perhaps) another cable, not another controller
• PC operation is standard, but manual operation does not even need a separate hand controller
• Temperature probe included
• Backlash compensation possible via firmware
• ASCOM and INDI compliant, but comes with a standalone program for Windows
• Firmware upgrade possible

This geared stepper motor has 0.0625° steps, 60 Ncm torque and little backlash, so you can focus your telescope fast and accurately with it - even with heavy imaging equipment.

• Useful resolution of 0.0625° (3.75 arc min) per step
• High torque for handling higher loads
• Low backlash making backlash compensation easier
• RJ45 socket allows using standard network cable for connecting to PegasusAstro´s Dual Motor Focus Controller
• Universal L Shaped Bracket allows mechanical connection to many focusers
• Supplied couplers allow mechanical connection to many focusing shafts

This device is a practical power supply for the "grab and go" astrophotographer who does not want too much automation.

• 4 x 12 V DC power outlets for your equipment (ON/OFF via software)
• 10 amps of total power
• DSLR output (can be switched ON/OFF)
• 2 channels with PWM for dew heaters RCA outputs (tune levels via software)
• Humidity and temperature sensor (included)
• Auto tune dew heaters
• Reverse polarity protection
• USB / PC controlled or standalone operation out of the box
• Lightweight and extremely compact enclosure

Equip the 3.7" TS-Optics rack and pinion focuser with the ZWO EAF motor focus system.

• Suitable for 3.7" TSFOCR, focusers and telescopes equipped with these focusers
• Allows the use of the EAF motorfocus system from ZWO
• Includes the complete mount, you do not need any accessories
• Simple and self-explanatory mounting
• Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
• Eyepiece focuser and motor focus are not included in the scope of delivery

Equip the 2.5" RAP focuser from TS-Optics with the ZWO EAF motor focus system.

• Suitable for all 2.5" TSFOCR25, TSFOCR25S and TSFOCR25-117 focusers and telescopes equipped with these focusers
• Allows the use of the EAF motor focus system from ZWO
• Includes the complete mounting, you do not need any accessories
• Simple and self-explanatory mounting
• Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
• Eyepiece extension and motor focus are not included in the scope of delivery

• Suitable for UNCN2-G2 and TSRPN2 focusers
• Enables the use of the EAF motor focus system from ZWO
• Elaborate and elegant adaptation to the focuser
• Simple and self-explanatory mounting
• Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing

Equip the 2" Crayford focuser from TS-Optics with the ZWO EAF motor focus system.

• Suitable for all 2" Crayford focusers and telescopes equipped with these focusers, e.g. TS-Photon Newtons
• Fits to the Crayford focusers with and without micro-reduction
• Allows the use of the EAF motor focus system from ZWO
• Elaborate and elegant adaptation to the focuser
• Includes mounting adapter and screw
• Simple and self-explanatory mounting incl. mounting instructions
• Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing

• Suitable for all 2" Monorail focusers and telescopes equipped with these focusers
• Allows the use of the EAF motorfocus system from ZWO
• Includes mounting adapter and four screws
• Simple and self-explanatory assembly, you will receive the assembly instructions after your purchase in an environmentally friendly PDF format
• Dimensionally stable up to 90 °C due to the use of PETG for 3D printing

Equip the 3" MONORAIL focuser from TS-Optics with the ZWO EAF motor focus system.

• Suitable for all 3" Monorail focusers and telescopes equipped with these focusers
• Suitable for all TS-Optics RC and Cassegrain telescopes with 10" aperture and larger
• Allows the use of the EAF motor focus system from ZWO
• Includes mounting adapter and four screws
• Easy and self-explanatory mounting, you will receive the mounting instructions after your purchase in an environmentally friendly PDF format
• Dimensionally stable up to 90 °C due to the use of PETG in 3D printing