Focuser & Accessories

Focusers and Accessories

A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".

View as Grid List
Sort by
Display

With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
91.00 €
Estimated delivery time : 1 week
 
 

With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
92.00 €
Estimated delivery time : 1-4 days
 
 

With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
92.00 €
Estimated delivery time : 1 week
 
 

With its coaxial power connector 5.5/2.5 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
82.00 €
Estimated delivery time : 1 week
 
 

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
82.00 €
Estimated delivery time : 1 week
 
 

With its coaxial power connector 5.5/2.5 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
82.00 €
Estimated delivery time : 1 week
 
 

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
82.00 €
Estimated delivery time : 1 week
 
 

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
92.00 €
Estimated delivery time : 1 week
 
 

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

  • Well matching the mentioned Pegasus Astro products
  • Also available with other DC plugs
  • Also available with other power cords
  • Large range of input voltages
  • Regulated with low ripple and noise
  • Protected against damaging working states
  • Sealed against dust and humidity
89.90 €
Estimated delivery time : 1-4 days
 
 

This device is a practical power supply for the "grab and go" astrophotographer who does not want too much automation.

  • 4 x 12 V DC power outlets for your equipment (ON/OFF via software)
  • 10 amps of total power
  • DSLR output (can be switched ON/OFF)
  • 2 channels with PWM for dew heaters RCA outputs (tune levels via software)
  • Humidity and temperature sensor (included)
  • Auto tune dew heaters
  • Reverse polarity protection
  • USB / PC controlled or standalone operation out of the box
  • Lightweight and extremely compact enclosure
242.00 €
Estimated delivery time : 1-4 days
 
 

Proudly standing between Pocket and Ultimate Powerbox, it has been designed to provide more advanced features than Pocket Powerbox in a more compact / quality design.

  • 4 x 12 V DC power outlets for your equipment (a single channel to switch all four outputs ON/OFF via software)
  • 12 amps of total distributed current
  • Adjustable output (3, 5, 8, 9, 12 V) / 3 A (can be switched ON/OFF) - power your DSLR / mirrorless camera
  • Embedded powered USB3 hub ? 4 x USB3 ports or 3 x USB2 ports available
  • 1 x power USB port (up to 3 amps) ? suitable for powering Raspberry PI 3/4
  • Port (RJ12) for external accessories (like external focus controller)
  • 2 channels with PWM for dew heaters ? RCA outputs (tune levels via software)
  • Humidity and temperature sensor (included)
  • Auto tune dew heater channels
  • Reverse polarity protection
  • USB / PC controlled or standalone pperation out of the box
  • Lightweight and extremely compact aluminium enclosure
319.00 €
Estimated delivery time : 1-4 days
 
 

Focus fast, reliably and accurately your telescope using a stepper or DC motor and this controller.

  • versatile, you can use your own motor instead of having to use one of PegasusAstro - and using another motor requires (perhaps) another cable, not another controller
  • PC operation is standard, but manual operation does not even need a separate hand controller
  • Temperature probe included
  • Backlash compensation possible via firmware
  • ASCOM and INDI compliant, but comes with a standalone program for Windows
  • Firmware upgrade possible
209.00 €
Estimated delivery time : 1 week
 
 

This geared stepper motor has 0.0625° steps, 60 Ncm torque and little backlash, so you can focus your telescope fast and accurately with it - even with heavy imaging equipment.

  • Useful resolution of 0.0625° (3.75 arc min) per step
  • High torque for handling higher loads
  • Low backlash making backlash compensation easier
  • RJ45 socket allows using standard network cable for connecting to PegasusAstro´s Dual Motor Focus Controller
  • Universal L Shaped Bracket allows mechanical connection to many focusers
  • Supplied couplers allow mechanical connection to many focusing shafts
139.00 €
Estimated delivery time : 1 week
 
 

This hand controller allows precise manual focus, vibration free!

  • Focusing with a rotary knob, thus intuitive
  • Two speeds, slow precision mode is active if the knob is pressed inside
    Speed indicators
  • Standard network cable with RJ45 plugs for connection
  • Can work simultaneously with the PC operation
76.00 €
Estimated delivery time : 1-4 days
 
 
The external motor controller (XMC) was designed to expand the focus capabilities of the "Ultimate Powerbox v2" (supports a 2nd focus controller) and adds focus functionality to the "Pocket Powerbox Advance".
  • Works with bipolar or unpolar stepper motors
  • Full, half, 1/4 and 1/8 step (microstepping)
  • Large range of supported stepper motors
  • Connector for environmental sensor
  • Protected against undervoltage, overcurrent and overtemperature
  • Made especially for Ultimate Powerbox v2 and Pocket Powerbox Advance
189.00 €
Estimated delivery time : 1-4 days
 
 
Optec TCF-S3 motorized Focuser 3" with Temperature Compensation.
2497.00 €
Estimated delivery time : 1-4 days
 
 
Optec TCF-S motorized Focuser 2" with Temperature Compensation.
999.00 €
Estimated delivery time : 1-4 days
 
 
Lacerta OCTO-PLUS 2-inch eyepiece slide for Newton (guided on 8 ball bearings, with 1:10 microfocus unit and 2" self-centering eyepiece sleeve), for 8 inch tubes
 
439.00 €
Estimated delivery time : 1-2 days
 
 
Lacerta OCTO-PLUS 2-inch eyepiece slide for Newton (guided on 8 ball bearings, with 1:10 microfocus unit and 2" self-centering eyepiece sleeve), for 10inch tube
 
439.00 €
Estimated delivery time : 2-4 weeks
 
 
Octo60 extender with centerlock-profile (12mm)
27.00 €
Estimated delivery time : 3-4 days
 
 
Adapter set between black TS RPA 25 focusers and MotorFocusLA, also for respective APM and similar
90.00 €
Estimated delivery time : 3-4 days
 
 
Adapter set between black TS RPA 20 focusers and MotorFocusLA, also for respective APM and similar
90.00 €
Estimated delivery time : 3-4 days
 
 
Adapter set between black FeatherTouch 3.5 focusers and MotorFocusLA

 
90.00 €
Estimated delivery time : 3-4 days
 
 
Adapter set between black FeatherTouch 3.0 focusers and MotorFocusLA

 
90.00 €
Estimated delivery time : 3-4 days