Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
Equip the popular 2" rack and pinion focusers from TS-Optics, Astroshop and many other suppliers with the ZWO EAF motorised focus system.suitable for 2" rack and pinion
- focusers from TS-Optics, Astroshop and many other brands
- Enables the use of the EAF motorised focus system from ZWO
- Manufactured using 3D printing
- Resistant to UV and temperatures up to approx. 80° C
- The Omegon focuser and the ZWO EAF are not included in the scope of deliver
59.90 €
Estimated delivery time : 3-4 days
Transforms the LS80MT into a 2-lens ED Apo for observation & photography of moon, planets & deep-sky
428.00 €
Estimated delivery time : 3-4 days
Transforms the LS100MT into a 3-lens ED Apo for observation & photography of moon, planets & deep-sky
379.00 €
Estimated delivery time : 1-2 months
Lacerta Motofocus Adaptor for TAKAHASHI, with both mounting plates for ALL common Takahashi focusers
90.00 €
Estimated delivery time : 3-4 days
This iOptron Electronic Automatic Focuser (iEAF) is designed for both Crayford and Rack-and-Pinion focusers.
Built-in temperature sensor Zero backlash Manual adjustment Position memorizing during power off
229.00 €
Estimated delivery time : 1-4 days
Newton base for 2" Feather Touch customized Curved base with leveling screws for 3.0" diameter Feather Touch focuser This base threads into our tube adapter...
263.00 €
Estimated delivery time : 1-4 weeks
With this focuser you can easily replace your old model and upgrade to the new 2" R&P version with 8 bearings. The focuser can be loaded with up to 5 kg.
Key data:
Key data:
- 60mm focussing travel
- Load capacity up to 5 kg
- 1:10 reduction ratio
- Weight 700g
- Suitable for Skywatcher Newtonian telescopes
- Incl. Skywatcher adapter (round adapter/ notch adapter)
389.00 €
Estimated delivery time : 1 week
With this focuser you can easily replace your old model and upgrade to the new 2" R&P version with 8 bearings. The focuser can be loaded with up to 5 kg.
Key data:
Key data:
- 35mm focussing travel
- Load capacity up to 5 kg
- 1:10 reduction ratio
- Weight 700g
- Suitable for Skywatcher Newtonian telescopes
- Incl. Skywatcher adapter (round adapter/ notch adapter)
359.00 €
Estimated delivery time : 1 week
Versatile base for flat surfaces, suitable for UNCN2, UNCN2-S, GSO focusers and older Baader Steeltrack focusers
- Flat support surface with only 5.2 mm overall height
- Four elongated holes for exact adjustment of the focusers
- Four counter screws to compensate a tilted position of the focuser
- Suitable for all focusers with a dovetail ring between 76-78 mm on the telescope side
- Secure fastening of the focusers with four M3 grub screws - not included in the scope of delivery
34.00 €
Estimated delivery time : 1 week
Adapter set between Feathertouch 2 inch focusers and MotorFocusLA
90.00 €
Estimated delivery time : 3-4 days
Gear reduction 1:10 for 2.5" Messier Hexafoc focuser
99.00 €
Estimated delivery time : 1-4 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male T2-thread.
27.00 €
Estimated delivery time : 1-4 days
The # 2957165 Steeldrive II is a high-precision motorised focuser drive for heavy loads - directly fitting to all Baader Steeltrack focusers.
665.00 €
Estimated delivery time : 1-4 days
The metal magnet ring for the homing sensor of the Steeldrive II fits to Baader Diamond Steeltrack focusers.
73.00 €
Estimated delivery time : 1-4 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male M68 thread.
39.00 €
Estimated delivery time : 1-4 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male M48 thread.
29.00 €
Estimated delivery time : 1-4 days
The flat adapter plate is used for mounting the 2" BDS-NT Diamond Steeltrack to a flat surface.
42.00 €
Estimated delivery time : 1-4 days
High-quality 2" clamping, suitable for focusers with S58 dovetail ring, like Baader Diamond Steeltrack
85.00 €
Estimated delivery time : 1-4 days
The completely new construction combines extreme durability and precision with high payload!
345.00 €
Estimated delivery time : 1-4 days
Befestigen Sie den ASKAR FMA180 pro an Montierungen, bringen Sie einen Sucher an und fokussieren Sie motorisch mit dem ZWO EAF Fokusmotor.
- Entstanden im 3D-Druckverfahren
- Geeignet für das APO-Teleobjektiv FMA180 pro von Askar
- Ermöglicht die Verwendung der ZWO EAF-Fokussiermotoren
- Leichte Kunststoffausführung, Schrauben aus Metall
- Durch die Verwendung von PETG beim 3D-Druck bis 80 °C formstabil
- Enthält Anbaukit mit Befestigungsmaterial, aber weder Werkzeug noch Teleskop oder Motoreinheit
99.00 €
Estimated delivery time : 1-4 days
Adapt the EAF motorized focus to Starlight Feather Touch True 3.5 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.5” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
74.90 €
Estimated delivery time : 3-4 days
Adapt the EAF motorized focus to Starlight Feather Touch True 3.2 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.2” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
69.90 €
Estimated delivery time : 3-4 days
Artesky Fast Focus Plane Kit
Allows easy adjustment of the focal plane and backfocus
- Tilter unit with 36 to 39 mm thickness
- Three female adapters, four male adapters
- Works especially well with CMOS cameras with up to 17.5 mm backfocus
139.00 €
Estimated delivery time : 1-4 days
