Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
Telescope connection: female M117x1 thread with 360° rotation Can also be attached to refractors via special adapter Connection on the eyepiece side is 2" and 1.25" M82x1 male thread, M77x1 female thread, M74x1 male thread and M69x1 female thread for screw adaptations Drawtube travel is 50 mm Bearing via stainless steel rail with ball bearings Adjustment via toothed rack - rack-and-pinion principle Suitable for EAF motorized focus without additional adapter
Adapt the EAF motorized focus to Starlight Feather Touch True 3.2 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.2” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
Adapt the EAF motorized focus to Starlight Feather Touch True 3.5 focusers with this adapter
- Fits all EAF motorized focusers from ZWO
- Suitable for Starlight FTF True 3.5” focusers
- Manufactured in 3D printing
- Resistant to UV and temperatures up to approx. 80° C
Equip the popular Baader Diamond Steeltrack focusers with the Toup Tek AAF motor focus system.
- Suitable for Baader Diamond Steeltrack focusers
- Enables the use of the AAF motor focus system from Toup Tek
- Manufactured using 3D printing
- Resistant to UV rays and temperatures up to approx. 80° C
Equip the popular Skywatcher Evolux 62 and 82 focusers with the Toup Tek AAF motor focus system.
- Suitable for Skywatcher Evolux 62ED and 82ED refractor focusers
- Enables the use of the AAF motor focus system from Toup Tek
- Manufactured using 3D printing
- Resistant to UV rays and temperatures up to approx. 80° C
- The Skywatcher 62ED and the Toup Tek AAF are not included in the scope of delivery
Equip the 3.7" rack and pinion focuser from TS-Optics with the Toup Tek AAF motor focus system.
- Suitable for 3.7" FOCR, focusers, and telescopes equipped with these focusers
- Enables the use of the Toup Tek AAF motor focus system
- Includes all mounting hardware, no additional accessories required
- Simple and self-explanatory installation
- Dimensionally stable up to 80 °C thanks to the use of PETG in 3D printing
- Eyepiece focuser and motor focus are not included in the scope of delive
Equip the popular UNCN2-G2 und TSRPN2 focusers with the Toup Tek AAF motor focus system.
- Suitable for UNCN2-G2 und TSRPN2 focusers
- Enables the use of the AAF motor focus system from Toup Tek
- Manufactured using 3D printing
- Resistant to UV rays and temperatures up to approx. 80° C
Astroprints Toup Tek Mounting Kit for AAF Motor Focus on Monorail 2" Eyepiece Holder
- All 2" monorail focusers
- TS-Optics 6“ and 8” RC telescopes and Cassegrains
- TS Photon Newton telescopes with 2" monorail focusers
Astroprints Toup Tek Mounting Kit for AAF Motor Focus on Monorail 3" Eyepiece Holder
- All 3" monorail focusers
- TS-Optics 10" - 16" RC telescopes and Cassegrains
Attach the ASKAR FMA180 pro to mounts, attach a viewfinder, and focus motorized with the ZWO EAF focus motor.
- Created using 3D printing technology
- Suitable for the APO telephoto lens FMA180 pro from Askar
- Enables the use of ZWO EAF focus motors
- Lightweight plastic design, metal screws
- Dimensionally stable up to 80 °C thanks to the use of PETG in 3D printing
- Includes mounting kit with fastening materials, but no tools, telescope, or motor unit
