Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
- Works with bipolar or unpolar stepper motors
- Full, half, 1/4 and 1/8 step (microstepping)
- Large range of supported stepper motors
- Connector for environmental sensor
- Protected against undervoltage, overcurrent and overtemperature
- Made especially for Ultimate Powerbox v2 and Pocket Powerbox Advance
This hand controller allows precise manual focus, vibration free!
- Focusing with a rotary knob, thus intuitive
- Two speeds, slow precision mode is active if the knob is pressed inside
Speed indicators - Standard network cable with RJ45 plugs for connection
- Can work simultaneously with the PC operation
This geared stepper motor has 0.0625° steps, 60 Ncm torque and little backlash, so you can focus your telescope fast and accurately with it - even with heavy imaging equipment.
- Useful resolution of 0.0625° (3.75 arc min) per step
- High torque for handling higher loads
- Low backlash making backlash compensation easier
- RJ45 socket allows using standard network cable for connecting to PegasusAstro´s Dual Motor Focus Controller
- Universal L Shaped Bracket allows mechanical connection to many focusers
- Supplied couplers allow mechanical connection to many focusing shafts
Focus fast, reliably and accurately your telescope using a stepper or DC motor and this controller.
- versatile, you can use your own motor instead of having to use one of PegasusAstro - and using another motor requires (perhaps) another cable, not another controller
- PC operation is standard, but manual operation does not even need a separate hand controller
- Temperature probe included
- Backlash compensation possible via firmware
- ASCOM and INDI compliant, but comes with a standalone program for Windows
- Firmware upgrade possible
Proudly standing between Pocket and Ultimate Powerbox, it has been designed to provide more advanced features than Pocket Powerbox in a more compact / quality design.
- 4 x 12 V DC power outlets for your equipment (a single channel to switch all four outputs ON/OFF via software)
- 12 amps of total distributed current
- Adjustable output (3, 5, 8, 9, 12 V) / 3 A (can be switched ON/OFF) - power your DSLR / mirrorless camera
- Embedded powered USB3 hub ? 4 x USB3 ports or 3 x USB2 ports available
- 1 x power USB port (up to 3 amps) ? suitable for powering Raspberry PI 3/4
- Port (RJ12) for external accessories (like external focus controller)
- 2 channels with PWM for dew heaters ? RCA outputs (tune levels via software)
- Humidity and temperature sensor (included)
- Auto tune dew heater channels
- Reverse polarity protection
- USB / PC controlled or standalone pperation out of the box
- Lightweight and extremely compact aluminium enclosure
This device is a practical power supply for the "grab and go" astrophotographer who does not want too much automation.
- 4 x 12 V DC power outlets for your equipment (ON/OFF via software)
- 10 amps of total power
- DSLR output (can be switched ON/OFF)
- 2 channels with PWM for dew heaters RCA outputs (tune levels via software)
- Humidity and temperature sensor (included)
- Auto tune dew heaters
- Reverse polarity protection
- USB / PC controlled or standalone operation out of the box
- Lightweight and extremely compact enclosure
With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector 5.5/2.5 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector 5.5/2.5 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
With its coaxial power connector XT60, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.
- Well matching the mentioned Pegasus Astro products
- Also available with other DC plugs
- Also available with other power cords
- Large range of input voltages
- Regulated with low ripple and noise
- Protected against damaging working states
- Sealed against dust and humidity
The Prodigy Microfocuser is a robust 3" motorised focuser that allows you to precisely adjust and remotely control the focus of your telescope equipment.
- 76 mm (3") clear aperture
- rotation adjustment on telescope and camera side
- adaptation to numerous telescopes possible
- USB and power connections for further accessories
- extremely precise mechanics
- remote controllable
- temperature sensor included in delivery
The visual back is necessary if you want to use your telescope visually with ESATTO 3" or if you want to connect a camera with a 2" nosepiece.
- Focuser side connection: M81x1 thread (female)
- Camera/eyepiece side connection: 2" receptacle
- Needs 12.5 mm back focus
This adapter allows you to connect ESATTO 2" to SkyWatcher/Orion ED80, ED100 or ED120 apochromatic refractors.
- Telescope side connection 96 mm flange with three female M4 threads for Skywatcher/Orion ED80/100/120
- Focuser side connection specific for PrimaLuce ESATTO 2"
- No reduction of back focus
This adapter allows you to connect accessories with M57 female thread to the ESATTO 3" focuser.
- Focuser side connection: M81x1 thread (female)
- Camera side connection: M57x1 thread (male)
- Needs only 4 mm back focus
This adapter allows you to connect accessories with M57 female thread to the ESATTO 3" focuser.
- Focuser side connection: M81x1 thread (female)
- Camera side connection: M57x1 thread (male)
- Needs only 4 mm back focus
This adapter allows you to connect accessories with M57 female thread to the ESATTO 3" focuser.
- Focuser side connection: M81x1 thread (female)
- Camera side connection: M57x0.75 thread (male)
- Needs only 4 mm back focus
This adapter allows you to connect accessories with M68 female thread to the ESATTO 3" focuser.
- Focuser side connection: M81x1 thread (female)
- Camera side connection: M68x1 thread (male)
- Needs only 4 mm back focus
This adapter allows you to connect accessories with M72 female thread to the ESATTO 3" focuser.
- Focuser side connection: M81x1 thread (female)
- Camera side connection: M72x1 thread (male)
- Needs only 4 mm back focus
This adapter allows you to connect accessories with M57 female thread to the ESATTO 3" focuser.
- Focuser side connection: M81x1 thread (female)
- Camera side connection: M57x1 thread (male)
- Needs only 4 mm back focus
This adapter allows you to connect the ESATTO 3" focuser to the GSO/Orion/TPO Ritchey-Chrétien with 10, 12, 14 and 16 inches.
- Telescope side connection for GSO/Orion/TPO Ritchey-Chrétien 10, 12, 14 and 16 inches
- Focuser side connection specific for PrimaLuce ESATTO 3"
This adapter allows you to connect the ESATTO 3" focuser to the Takahashi telescope FSQ85.
- Telescope side connection M72x1 thread (male) with stop ring for the Takahashi telescope FSQ85
- Focuser side connection specific for PrimaLuce ESATTO 3"
Versatile Motor Focus from PrimaLucelab with adaption to many focusers
- Outstanding precision of 0.7 microns/step
- Compatible to a wide range of focusers, often without external brackets
- Controlled by PC via USB-C (reversible) or tablet/smartphone via its own WiFi network
- Motor and electronics are fully integrated into the casing
- Dimmable status LEDs can even be turned off and are helpful at night
- Compact dimensions of 87.5 x 60 x 43 mm
- Included: configuration software with extensive control options, available via download
- ASCOM driver allows control with all conventional astro software
Works especially fine with the ARCO camera rotator - Can be supplied with a temperature probe for automatic focus correction
Temperature probe for the SESTO SENSO Motor Focus
- Convenient jack plug for quick connection
- Precise measurement of ambient temperature
- Enables automatic focus adjustment to compensate temperature variance
- Contrary to the image, the sensor has a straight plug, not an angled one.
SC 3.3? adapter for ESATTO 2" allows you to connect the ESATTO 2" focuser to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models.
- Telescope side connection 3.3" SC thread
- Focuser side connection specific for PrimaLuce ESATTO 2"
- Only 2 mm reduction of back focus
Thanks to the ESATTO 2" adapter for telescopes with SC thread, you can connect the ESATTO 2" to SC telescopes like the Celestron C6, C8, C9.25 and EdgeHD800.
- Telescope side connection 2" SC thread
- Focuser side connection specific for PrimaLuce ESATTO 2"
- No reduction of back focus
This end cap fits the 3.5" Feather Touch focusers and allows the adaption of 2" accessories to this focuser.
- Eyepiece connection: 2" with compression ring and 3 machined thumb screws
- Focuser connection: female thread - fits the big male thread of the FTF35XX focuser
