Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
Adapter set between black FeatherTouch 3.5 focusers and MotorFocusLA
90.00 €
Delivery date : 3-4 days
Adapter set between black TS RPA 20 focusers and MotorFocusLA, also for respective APM and similar
90.00 €
Delivery date : 3-4 days
Adapter set between black TS RPA 25 focusers and MotorFocusLA, also for respective APM and similar
90.00 €
Delivery date : 3-4 days
Lacerta OCTO-PLUS 2-inch eyepiece slide for Newton (guided on 8 ball bearings, with 1:10 microfocus unit and 2" self-centering eyepiece sleeve), for 10inch tube
439.00 €
Delivery date : 2-4 weeks
Lacerta OCTO-PLUS 2-inch eyepiece slide for Newton (guided on 8 ball bearings, with 1:10 microfocus unit and 2" self-centering eyepiece sleeve), for 8 inch tubes
439.00 €
Delivery date : 1-2 days
2" stainless steel Newton Crayford Focuser with 1:10 reduction ratio
289.00 €
Delivery date : 1-4 days
Optec TCF-S motorized Focuser 2" with Temperature Compensation.
999.00 €
Delivery date : 1-4 days
Optec TCF-S3 motorized Focuser 3" with Temperature Compensation.
2497.00 €
Delivery date : 1-4 days
The external motor controller (XMC) was designed to expand the focus capabilities of the "Ultimate Powerbox v2" (supports a 2nd focus controller) and adds focus functionality to the "Pocket Powerbox Advance".
- Works with bipolar or unpolar stepper motors
- Full, half, 1/4 and 1/8 step (microstepping)
- Large range of supported stepper motors
- Connector for environmental sensor
- Protected against undervoltage, overcurrent and overtemperature
- Made especially for Ultimate Powerbox v2 and Pocket Powerbox Advance
189.00 €
Delivery date : 1 week
This hand controller allows precise manual focus, vibration free!
- Focusing with a rotary knob, thus intuitive
- Two speeds, slow precision mode is active if the knob is pressed inside
Speed indicators - Standard network cable with RJ45 plugs for connection
- Can work simultaneously with the PC operation
76.00 €
Delivery date : 1 week
This geared stepper motor has 0.0625° steps, 60 Ncm torque and little backlash, so you can focus your telescope fast and accurately with it - even with heavy imaging equipment.
- Useful resolution of 0.0625° (3.75 arc min) per step
- High torque for handling higher loads
- Low backlash making backlash compensation easier
- RJ45 socket allows using standard network cable for connecting to PegasusAstro´s Dual Motor Focus Controller
- Universal L Shaped Bracket allows mechanical connection to many focusers
- Supplied couplers allow mechanical connection to many focusing shafts
130.00 €
Delivery date : 1 week
