On stock

Observer Hat black with red/white LED

Item condition: new and original packed

Wichtiger Hinweis zur Mehrwertsteuer:
Dieses Angebot unterliegt mit Ausnahme der Versandkosten gemäß § 25a UStG der Differenzbesteuerung, weshalb auf den angebotenen Artikel keine Umsatzsteuer erhoben und ausgewiesen wird.

Beobachtungsbuch für Sterngucker

Item condition: new, but not original packed

Mounting Plate for Telescopes with 2 Tuberings on Photo Tripod with 1/4 Inch Screw

Item condition: new, but not original packed

Bathinov Masks 328

Item condition: new and original packed

Product information "Barigo Weather Station Modern Ø100mm" Barometer, thermometer, hygrometer in a housing made of nickel-plated brass, simple and modern in design with clear lines. The weather station is suitable as a table instrument and for wall mounting. With a white scale and black pointers and a diameter of 100mm, there is a very good contrast for easy readability. Overall dimensions 104x35mm, weight 300g Made in Germany by Barigo

Item condition: new and original packed

Baader VariLock 29 - locakble variable T2 extension 20-29 mm (T2 part #25Y)

Item condition: new, but not original packed

Baader T2 Extension Tube #25A, Length 15 mm

Item condition: new, but not original packed

Baader Narrowband OIII 1.25" Filter

Item condition: new, but not original packed

Quick mounting of optics with all EQ standard Celestron / Skywatcher / Vixen dovetail Massive but lightweight EQ-clamp, 190 mm (7.5") long w. multi-contact ribbed dovetail face Bottom side featuring various predrilled hole patterns to fit onto DEC-face of most mounts (Takahashi, 10Micron, Astro-Physics, Vixen, Celestron) With an integrated 3 "dovetail, suitable for all mounts with 3" (Losmandy). Can therefore also be used for adapting telescopes with attached Vixen rails to 3" clamps

Item condition: new, but not original packed

Baader Clamp 3", 230mm Pan EQ Dual Clamp ( Losmandy/Vixen) This dual PAN 3"/EQ clamp / 230 mm with two clamping screws clamps both most important standards of dovetail bars equally tightly It is equipped with all known mounting holes to be screwed onto all mounts and all tube rings of the well-known brand manufacturers. Length: 230mm, Max. Width: 153mm, Weight: 1150g

Item condition: new, but not original packed

Baader Glasspathcorrector for binoviewers The corrector is more than just a simple barlow lens that compensates for part of the optical path of the binoviewer. First of all, the corrector corrects the color fringes created by the prisms of the binoviewer. Contrast and sharpness of the image increase. Calculation of the shortening factor: The corrector is installed directly in front of the binoviewer. If the corrector is moved further away from the binoviewer, the magnification effect and path compensation increase. ♦ GWK 1,25x: The optical path of the binoviewer is shortened by 18 mm. ♦ GWK 1,7x: The optical path of the binoviewer is shortened by 41 mm. ♦ GWK 2,6x: The optical path of the binoviewer is shortened by 84 mm. Adaptation to the telescope: Adaptation to the binoviewer is simple. The corrector is simply clamped between the T2 female thread and the T2 male thread. The adapter is automatically centered. For the connection to 1.25" or 2" we recommend suitable Baader adapters which are linked under the accessory recommendations. Further application possibilities: The correctors are not only suitable for the Baader Maxbright binoviewers. Also for other binoviewers or adapters, prisms ... the correctors can be used. Whenever you cannot reach the point of focus with a new accessory, the Baader Glass Path Corrector can be the saving solution.

Item condition: new and original packed

Baader Glaspath Corrector 1.7x for Mark V ZEISS Baader Binocular

Item condition: new and original packed