On stock

ASI T2-Tilter - Tilt flange Adjustment of image plane and sensor position Many astrophotographers know the problem: You focus as good as possible and in 1-2 corners the sharpness is still not satisfying. The result is a bad compromise, by changing the sharpness setting until the stars appear relatively evenly "sharp" or by simply cutting away the corner. Some possible causes of this problem: ♦ a slight tilt of the camera sensor (only a few fractions of a millimeter are enough) ♦ a tilt of the focuser ♦ a slight tilt of the field plane of the telescope (very common with Newtonian telescopes) ♦ a tilting of the eyepiece-side accessories during clamping This is the solution: With the ASI T2 tilter you simply adjust the chip of the camera to the field of the telescope, no matter where the cause of the tilt comes from. You only have to keep the orientation of the whole adapters, correctors and camera. Connecting the camera to the tilter: In principle, any suitable camera can be connected to the tilter via the T2 thread. However, additional bores also allow the connection directly to the camera body on the following ZWO cameras: ♦ ASI294/ASI1600/ASI183/ASI533 Pro cooled ♦ ASI294/ASI1600/ASI183/ASI174 uncooled With the ASI071 and ASI 2600 Pro the housing is differently dimensioned, the direct connection does not work. There it only works via the T2 thread.

Item condition: new and original packed

Zeiss Jena M44 Barlowlens 2 x

Zeiss color-filter-wheel for 0.965" eyepieces in woodenbox

Vixen 50 mm finder bracket

Item condition: used Item with possible small cosmetic deffect, but every function works perfect

Wichtiger Hinweis zur Mehrwertsteuer:
Dieses Angebot unterliegt mit Ausnahme der Versandkosten gemäß § 25a UStG der Differenzbesteuerung, weshalb auf den angebotenen Artikel keine Umsatzsteuer erhoben und ausgewiesen wird.

Connection cable to control the Canon EOS 5D, 6D, 20D and similar models via the Lacerta M-GEN autoguider

Item condition: new and original packed

TS-Optics Twist-Lock adapter from 2" to 1.25" with filter thread - clamped as if screwed! The Twist-Lock system allows perfect clamping on the optical axis. Tilting of accessories is prevented which means irritating problems with the common combination "safety groove and ring clamping" belong to the past. By rotating the upper ring, it embraces the eyepiece or adapter whilst travelling 15 mm. A gentle tightening is sufficient to achieve a secure connection. The TSTW2-1 fits in every 2" eyepiece reception and cannot tilt itself, because it doesn´t have a safety groove. The adapter has a telescope-sided 2" filter thread (M48x0.75) for screwing in 2" filters.

TS-Optics Super Plössl with 25 mm focal length

Item condition: new and original packed

This adaptor allows you to connect your Pentax SLR camera with the Pentax K and Sigma Bajonett to a telescope or spotting scope. The ring fits into the bayonet of the camera and has the T2 (T-Mount, M42x0.75) thread on the inside. You only need a T2 male thread on the telescope or spotting scope. We offer such adapters for most common telescope models. Three small headless set screws allow you to rotate the camera if needed.

Item condition: new and original packed

T2 Adapter for BW spotting scopes - Connection Adapter for photography BW spotting scopes from TS Optics are high-quality all-round spotting scopes for animal and landscape viewing. With this BW-T2 adapter, you convert the spotting cope to a long telephoto lens. Now you can engage in the fascinating area of digiscoping, the photography through spotting scopes. The adaption could not be easier: just gently screw off the eyecup of the zoom eypiece (counterclockwise), and screw the BW-T2 adapter on. With the optional T2 adapter or filter thread adapter, you can now attach your camera and get started. All functions of the spotting scope, like focusing and the variable magnification offered by the zoom eyepiece, are maintained for photography. You can use all popular cameras, like DSLR, mirrorless cameras and cameras with fixed lenses. Connection is always accomplished via the T2-thread of the adapter. Note: Some newer BW80Z and BW100Z do not have a threaded eyecup, so you cannot mount the adapter. You cannot even remove the eyecup, hence "gently". Scope of Delivery: Adapter

Item condition: new and original packed

TS-Optics eyepiece projection adapter for eyepieces 50-59 mm O.D.

Item condition: new and original packed

TS-Optics Beginner Telescope 150/750 mm with mount EQ3-1 ; delivery include: - Tube with optics - Equatorial mount - Tripod with tray - 6x30 finder - 2 good Plössl eyepieces (25 mm, 6.5 mm) - Barlow lens 2x - 1.5x erecting lens - Moon filter

Item condition: new and original packed

Suitable for: Focusers with a dovetail ring with 79-80 mm diameter Base for focusers

Item condition: new, but not original packed