On stock

SKY-WATCHER EQUATORIAL MOUNTING PLATE 15cm Custom-made for Sky-Watcher EQ5, HEQ5 and EQ6 Mounts. These mounting plates can be adapted to fit any standard Intes mounting plate (customer required to drill/tap both mounting plates as necessary) for the secure mounting of your Intes telescope on these precision Sky-Watcher mounts. Delivered with: Mountingplate 15cm

Item condition: new, but not original packed

The APM 3" mounting plate with 180mm length is a high-quality Losmandy-compatible mounting unit with a flat support surface. The plate is very solid and also supports heavy telescopes without any problems. The holes and auxiliary threads allow a versatile application. Characteristics: Solid, hardened aluminum (thickeness 12.5mm) for high instrument loads 101.5mm contact surface width for different hardware combinations Beveled edges on the front sides for safe insertion Compatibility (extract): AllMounts with Losmandy compatible fast locking system Losmandy Mounts: GM8, G-11, Titan Celestron Mounts: CGEM, CGEM-DX, CGE Pro Skywatcher Mounts: EQ6, AZ-EQ6, EQ6-R, EQ8 Delivery: Mounting plate 180mm length Specifications: Thickness: 12.5mm Slotted hole 1: centric 100mm Slotted hole 2+3: 19mm from center line - 25mm long Bores: 5x centric, 2 pairs with 22.5 space, 1 pair with 38mm space M6 thread bores: 3x cemtric, 2 pairs with 35 mm space, 3 pairs with 24 mm space Total length: 330mm Width: 3" Weight: ca. 900g

Item condition: new and original packed

Rowan Saddle with Losmandy/Vixen DV profile

Item condition: new and original packed

RA MOTOR DRIVE FOR EQ2

Item condition: new and original packed

Lunt Super Lander;The rocker box and telescope shown in the picture are not included in the scope of delivery Folded Measurement: 450mm (18 inches) Diameter x 950mm (37.4 inches) Height Powered Height Adjustments: 18″ Net Weight: 28kg (62 lb.) Load Capacity: 99kg (220lbs) Hybrid, hydraulic/gas mechanisms rigid-lock the legs (10000N) in any extended angle/position and use gas as a damper in compression. Feet: High quality anti-vibration leveling feet (made in Germany) with load capacity of 12KN each. Finish: Anodized Iridium Silver Two-Button Hand Switch 120v/12v Power Supply Two Year Warranty Universal Top plate compatible with most mounts

Item condition: new, but not original packed

Skywatcher SynScan Tour Handcontroller

Item condition: new, but not original packed

Berlebach Stativ UNI 26

Item condition: new and original packed

Altair TMS 180mm Losmandy dovetail plate BLUE anodized

Item condition: used Item with possible small cosmetic deffect, but every function works perfect

Altair TMS 250mm Losmandy Dovetail Plate BLUE Anodized

Item condition: used Item with possible small cosmetic deffect, but every function works perfect

Altair Astro Losmandy/Vixen HD dual prism clamp

Item condition: new, but not original packed

Product description Berlebach Moduleinsatz 4 FOR TRIPODS REPORT The module insert 4 unites the modules 2 and 3, because here a centre column is integrated in a levelling ball. Here too the 50 cm long centre column with diameter 25 mm/1 in is made of precision wrought light-metal tubing, so that a comfortable height adjustment is possible. The columns are introduced accurately fitting into the tripods, in order to keep the tolerances as low as possible. The module insert 4 as also available with a firmly fixed rotating panorama plate, having the module designation 4/P.

Item condition: new, but not original packed

Baader Clamp 3", 230mm Pan EQ Dual Clamp ( Losmandy/Vixen) This dual PAN 3"/EQ clamp / 230 mm with two clamping screws clamps both most important standards of dovetail bars equally tightly It is equipped with all known mounting holes to be screwed onto all mounts and all tube rings of the well-known brand manufacturers. Length: 230mm, Max. Width: 153mm, Weight: 1150g

Item condition: new, but not original packed