This filter was developed to suppress light pollution for colour and monochrome cameras and offers more balanced RGB colours.
ltair TRI-RGB is great for broadband objects such as mixed emission / reflection nebulae, comets, dust clouds and galaxies, but it also allows the major emission nebulae lines through. It covers both broadband AND narrowband targets.
TRI-RGB complements the Altair TriBand and DualBand filters by adding star colours.
TRI-RGB and works with fast or slow focal ratio telescopes and camera lenses.
TRI-RGB is not only for light pollution control. It works very well under dark skies too by enhancing colour purity, airglow and reducing channel crossover in colour CMOS and DSLR cameras.
Although primarily intended for colour cameras, TRI-RGB can be used for a cleaner luminance channel with a mono camera.
High transmission peaks with steep sides enhance contrast, together with almost total suppression of unwanted light, at OD4/5 (0.01%~0.001%) over the majority of unwanted visual wavelengths.
279.00 €259.00 €
Estimated delivery time : 1-2 weeks (valid for new orders)
The 1.25 "UltraFlat Field Eyepiece features a high quality standard and a very compact design, which is designed to remove the field curvature at the edge, resulting in a flat, distortion-free image up to the edge of the visible field of view.
179.00 €
Estimated delivery time : 4-8 weeks (as from Availability) (valid for new orders)
L2 Dual-Combo Set includes two premium filters: one L-eXtreme and one L-Synergy. The L2 Dual-Combo Set is engineered to unleash the power of Hubble Palette imaging for color camera users, supporting telescope systems as fast as F3.3, and above ( slower system). 2" (M48×0.75)
569.00 €
Estimated delivery time : 1 week (valid for new orders)
Dielectric coatings; super flat mirror with dielectric coatings to reduce reflected light loss; provide an over 99% reflective surface; good for astronomical viewing;
The 1.25-inch nosepiece fits 1.25-inch telescopes and accepts standard 1.25-inch filters, eyepieces, Barlow lenses, and similar accessories; The 2-inch nosepiece is compatible with 2-inch telescopes and accommodates standard 2-inch filters and accessories. You can choose either 1.25inch or 2inch diagonal based on your requirements;
90 degree viewing angle; diagonal reflects the telescope’s light path 90 degree to provide a more comfortable viewing angle; best for observing objects overhead;
Correct upside down and left right reversed image; the view image is upright; but left and right reversed if use the 90 degrees to your telescope;
Brass compression ring; Built in brass ring and thumbscrew accessories avoid eyepiece to rotate during adjustments; effortless fixes more firmly and will not scratch your eyepieces barrels.
65.00 €
Estimated delivery time : 1 week (valid for new orders)