We offer you a wide range of different tripods for almost every load class. Whether it's a heavy-duty tripod for astrophotography or a portable hiking tripod, you're sure to find something here.
- Spring to prevent the camera from tipping - Scale for horizontal panning - Swivel arm for right- and left-handed persons - Stable two-point axle bearing - camera plate 80 x 50 mm - Camera mounting thread 1/4" - Base thread 1/4" und 3/8" - Takes loads of up to 5 kg - Height: 9 cm
- Same sturdy design as model 520, but: Without swivel arm, instead - With additional clamping lever - camera plate 80 x 50 mm - Camera mounting thread 1/4" - Base thread 1/4" und 3/8" - Takes loads of up to 5 kg - Height: 9 cm
- Same sturdy design as model 520, but with additional features: Reinforced head plate - Spring-mounted video pin - camera plate 80 x 50 mm - Camera mounting thread 1/4" - Base thread 1/4" und 3/8" - Takes loads of up to 5 kg - Height: 9.5 cm
Albatros Its innovative construction allows this ball panning head to carry out laterally guided movements. At the same time, Pegasus offers high stability and easy operation. The unique "MotionControl" technology prevents unintented lateral tilting. The Pegasus tripod heads provides high stability for static exposures as well as unlimited flexibility in dynamic photography. You can use it with a wide range of lenses from wide angle to low aperture telephoto lenses plus for portrait and landscape formats. Pegasus is one of the most innovative tripod heads: Universal â€" Optimal allround tripod head for usage in nature, tele and travel photography MotionControl â€" Laterally stable guiding for controlled movement in dynamic tele photography Tilting stability â€" Oversize ball allows firm fixation and enormous stability Ergonomic â€" One single clamping lever â€" always in same position relative to the camera lens unit Basis for panoramic photography by blocking of horizontal axis Fast & Secure â€" Integrated quick releasecoupling in dove tail profile with safety pin, compatible for third party quick release plates (e. g. ArcaSwiss) - Tilt angle: 43 degrees - Friction preset - Panorama base locking - Ball diameter: 64 mm - integr. dovetail Quick release - Tripod adapter: Diameter 85 mm â€" 3/8 " - Height: 112 mm - Max. load: 15 kg
Dieser Neiger besticht durch innovative Technik sowie hohe Tragfähigkeit bei geringem Eigengewicht. Die integrierte Schnellkupplung Mod. 110 (Arca-Swiss kompatibel) lässt sich mit dem beigefügten Innensechskantschlüssel innerhalb kürzester Zeit um 90° versetzt montieren. So können Sie mit Hilfe eines an der Kamera befesstigten Winkels diesen Neiger eingeschränkt als 3-Wege-Neiger verwenden. Die Feststellung beider Ebenen wird dank einer speziellen Mechanik über ein einziges Klemmelement erreicht. Die Friktionseinstellung für den Vertikalschwenk erfolgt über ein Stellrad gegenüber vom Klemmelement. Dieser Neiger lässt sich in der Vertikalbewegung beidseits 90° schwenken. Einsatzgebiete: Fotografie, Beobachtung mit Spektiv oder Fernglas Belastbar bis 5 kg Höhe: 90 mm Bodengewinde: 3/8" (Gewindehülse zur Reduzierung auf 1/4" liegt bei)
- Integrated quick clutch and interlock safety device - Pivoting range 90° in both directions - Friction control for vertical pan - For vertical pan connectible load-spring for loads over 2 kg - Integrated spirit levels - Base thread 1/4" and 3/8" - Takes loads of up to 5 kg - Height: 80 mm
This is our new 2-way tilt head which allows swivels in the horizontal and vertical axis. Both axes are individually lockable and due to the friction adjustment of the vertical swivel they are also suitable for amateur film makers. The vertical swivel range of 90° in both directions is possible; the easiness or heaviness is adjustable via a friction adjustment. On the side of the fixation of the guide handle there is a brightly anodised adjusting knob, with which a load pick-up spring can be switched on. In case of camera weights of more than 3 kg this function should generally be used so that the camera or the spotting scope cannot strike forwards or backwards when the guide handle is released inadvertently. The tilt head is equipped as a standard with the quick-release coupling mod. 150 (Arca-Swiss/UniQ/C compatible). It has two integrated rod spirit levels which allow an exact alignment of both axes and a locking pin which prevents that the change plate slips out accidentally. The quick-release coupling is removable and can be replaced by the quick-release coupling mod. 130 as well as the panorama plates P101 or P 103. The quick-release couplings mod. 130 and mod. 150 can be screwed on offset by 90° so that the tilt head is also suitable for cameras with portrait format angle. The scope of delivery includes the change plate 050/57 mm. The guide handle can be optionally mounted for right- and left-handed persons. By means of the delivered Allen key the retaining screw is loosened and the guide handle is inserted from the other side and then retightened. Thanks to the modular construction of the tilt head, it is possible to upgrade this 2-way tilt head to a 3-way tilt head by means of the "portrait format extension" component (art. no. 320196). Diameter of the ground plate for tripod connection: 68 mm Tripod connection 3/8â€, threaded socket for reduction to ¼†is enclosed
- Integrated quick clutch and interlock safety device - Pivoting range 90° in both directions - Friction control for vertical pan - For vertical pan connectible load-spring for loads over 2 kg - Integrated spirit levels - With additional 3rd axis for portrait work - Pan range fpr 3rd axis from 0° to +90° - Supplied with quick-change holders 040R and 040F with thread size 1/4", or 3/8" optional - Takes loads of up to 5 kg - Base thread sizes 1/4" and 3/8" - Height: 109 mm