Tuberings / guiding scope rings and guiding mounts:

Orion tube rings - aluminium - for tubes with D=100 mm Stable tube mounting rings with hinge The rings have a flat support surface on both sides. At the base of the rings there is an M6 female thread for attachment to a dovetail bar or to the top plate of the mount. On the opposite side of one ring you will find a female thread (1/4" photo thread), on the one of the other a male photo thread with counter ring for attaching a camera. The rings have a felt lining to protect the telescope tube.

Item condition: new, but not original packed

APM-JK CNC-tube rings for tube diameter 136 mm. Stable, easily swivelling open matal clamps for a optimal connection between telescope and mount. Suitable for telescope tube with 136 mm outer diameter. Easy and quick mounting of the rings to the telescopes. Felt coating at the inner side prevents from scratches on the tube.

Item condition: new and original packed

APM-CNC tube rings for tube diameter 136mm

Item condition: new and original packed

APM-JK CNC tube rings for tube diameter 145mm Stable, easily swivelling open metal clamps for an optimal connection between telescope and mount. Suitable for telescope tubes with 145 mm outer diameter Easy and quick mounting of the rings to the telescopes Felt coating at the inner side prevents from scratches on the tube

Item condition: new and original packed

APM CNC tube rings, 145mm, price for one pc

Item condition: new and original packed

APM CNC tube rings for tube diameter 170 mm, price each set

Item condition: new and original packed

APM-JK CNC-tube rings for tube diameter 300mm Stable, easily swivelling open metal clamps for an optimal connection between telescope and mount. Suitable for telescope tubes with 300 mm outer diameter Easy and quick mounting of the rings to the telescopes Felt coating at the inner side prevents from scratches on the tube

Item condition: new and original packed

Product description Classy CNC Tube Rings with elegant design and uncompromising quality A beautiful telescope should be attached to the mount with perfect tube rings, too. Here, a beautiful look is as much in demand as gut technical properties. The CNC tube rings fulfill these requirements. The tube has only 8 mm distance to the bottom side of the rings, thus the mount is not additionally loaded by unnecessarily long levers. The tubes have plane support surfaces on both sides with five female M6 threads on each side. 1 M6 thread in the middle, 2 M6 threads at a distance of 19 mm from the middle, 2 M6 threads at a distance of 30mm from the middle. With this, you can easily attach dovetail bars and accessories. With only 5 mm thickness, the rings are lightweight yet very stable A thin layer of felt was put on the inside of the tube rings for avoiding scratches. However, the tube is clamped very well in the rings and does not change position. That is important if a guiding scope is attached to the rings. Delivery contents Set of 2x Aluminium CNC Tube Rings

Item condition: new and original packed

Classy CNC tube rings with elegant design and uncompromising quality from TS Optics A beautiful telescope should be attached to the mount with the finest tube ring. Here, a beautiful appearance is as important as good technical properties. The CNC tube rings from TS meet these requirements. ♦ The tube is attached to the mount or the dovetail via a largely dimensioned support surface. ♦ The rings have identical support surfaces on top which allows attaching dovetail clamps or another dovetail bar. ♦ The rings can be folded open, thus the telescope can be removed from them within seconds. ♦ A thin layer of felt was applied to the inner side of the rings. This prevents from scratches. Nevertheless, the telescope tube is clamped very well in the rings and does not misalign. This is important if a guiding scope is attached to the rings. ** 1 Piece **

Item condition: new, but not original packed

TUBE MOUNTING RINGS 160mm These quality cast aluminium rings are custom-made for use with either the AZ3, EQ1, EQ2, EQ3-2, EQ4, EQ5, HEQ5 and EQ6 (incl. PRO) mounts/mounting plates. Rings of the following internal diameters are available: 90mm, 102mm, 120mm, 130mm, 140mm, 182mm, 236mm & 285mm. They are felt-lined and hinged for easy installation of the telescope. By loosening the thumbscrews, the telescope can be easily balanced and rotated. Please note these are supplied in WHITE colour. Delivered with: 2 Rings 160mm

Item condition: new, but not original packed