Tripods

The tripod Report 933 is equipped with the module insert 3, i.e. with a permanently installed levelling ball, a diameter of 55 mm and a spirit level. This enables a quick and precise adjustment of the tripod. The pivoting range is 30° in all directions. The fastening screw is spring-loaded. Place your tilt head or your camera down and fasten it from below by means of the star knob screw. This module insert is particularly suitable for heavy equipment, because the integrated ball partly allows the work without additional tilt head. The lens or the camera is fastened directly on the tripod. Since there is only one connection between the tripod and the camera, this is the most stable and the safest method. Double tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.

THE NEW MODULAR REPORT TRIPOD SYSTEM The light magnesium mounting head serves as module basis for 10 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the new stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs. The tripod Report 933/P is equipped with the module insert 3/P, i.e. with a permanently installed levelling ball, a diameter of 55 mm ,spirit level and an integr. panorama plate. This enables a quick and precise adjustment of the tripod. The pivoting range is 30° in all directions. The fastening screw is spring-loaded. Place your tilt head or your camera down and fasten it from below by means of the star knob screw. This module insert is particularly suitable for heavy equipment, because the integrated ball partly allows the work without additional tilt head. The lens or the camera is fastened directly on the tripod. Since there is only one connection between the tripod and the camera, this is the most stable and the safest method. Double tripod leg extension.

The tripod Report 943 is equipped with the module insert 4, i.e. with a centre column which has a length of 50 cm and a diameter of 25 mm, made of precision-drawn light-metal tubing, and a levelling ball. The centre column is additionally equipped with a rotating panorama plate. By means of the centre column, the levelling ball can be tilted by 30° in all directions. The support plate made of aluminium has a diameter of 68 mm and is equipped with a fixed fastening screw (size to be selected) as well as three locking screws which secure the mounted system against unintentional loosening. The spirit level ensures a quick and precise adjustment. When using an extra-short centre column (10 cm), it is possible to work near ground level. Double tripod leg extension. The specified maximum height applies if the centre column with a length of 50 cm is extended. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.

Like tripod Report 9043 except that centre column has a non-removable rotating panorama plate. Especially suitable for ball heads without a built-in rotation plate. These are top-of-the-line tripods that deliver perfect results in any conditions. For many work assignments there is no need to use a tripod head. Extremely convenient when working on uneven ground. Double leg extension.

Mounting head with permanent 2 D pan/tilt attachment. The pan/tilt attachment being firmly mounted on the tripod provides outstanding stability. Photo head model 520 width sliding camera teaining screw. Double leg extension.

Mounting head with permanent 2 D pan/tilt attachment. The pan/tilt attachment being firmly mounted on the tripod provides outstanding stability. Video head model 520 Video with spring-loaded video-pin. Double leg extension.

The tripod Report 963 is equipped with the module insert 6, i.e. with a half ball with a diameter of 75 mm for the direct insertion of professional video tilt heads or a levelling unit (available as an accessory). The half ball ensures a pivoting range of 15° in all directions which leads to a quick and precise tripod adjustment. The levelling unit is fastened my means of the 80-mm wooden handle or the star knob. Double tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.

Das Berlebach Stativ Sky ist eine Weltneuheit des traditionsreichsten Stativherstellers der Welt, speziell konzipiert für höchste Ansprüche ambitionierter Astronomen. Das Berlebach Stativ SKY kombiniert die besten Eigenschaften des Werkstoffes Holz mit den hervorragenden Attributen neuartiger Carbonwerkstoffe. Der äußerst flach gestaltete neue Stativkopf mit 105 mm breiter Stativbeinanbindung gewährleistet höchste Verwindungssteifigkeit. Durch den verwendeten Stativfuß aus Kohlefaser, der in einem neuartigen Verfahren hergestellt wird, erreicht man eine maximale Belastbarkeit bei sehr geringem Eigengewicht. Ebenso werden die Holzprofile durch ein patentiertes System mit Kohlefaser verstärkt. Das Stativ wird mit doppelten Klemmschellen geliefert. In der Summe der drei Innovationen wird ein Höchstmaß an Belastungsfähigkeit, maximaler Stabilität und Schwingungsdämpfung erreicht. Ein ausgezeichnetes Design unterstreicht den gehobenen Anspruch dieses Stativs, das das Herz jedes Astronomen höher schlagen lässt.

This tripod is ideal for filming assignments and is compatible with all professional video heads with a diameter of 100 mm. In addition, we offer a suitable 100 mm diameter leveling unit capabel of taking any tilt head as required. Without leg spread stops. The maximum height given below is that at an approx. 20° leg spread.

This tripod is ideal for filming assignments and is compatible with all professional video heads with a diameter of 75 mm. In addition, we offer a suitable 75 mm diameter leveling unit capabel of taking any tilt head as required. Without leg spread stops. The maximum height given below is that at an approx. 20° leg spread.

These tripod is ideal for filming assignments and is compatible with all professional video heads with diameters of 100 mm. In addition, we offer suitable 100 mm diameter leveling unit capabel of taking any tilt head as required. With leg spread stops at 20°, 35°, 55° and 80°.

These tripod is ideal for filming assignments and is compatible with all professional video heads with diameters of 75 mm. In addition, we offer suitable 75 mm diameter leveling unit capabel of taking any tilt head as required. With leg spread stops at 20°, 35°, 55° and 80°.