Tripods

This car window mount has a large plate providing ideal support for cameras with large lenses. It is also possible to attach a tripod head. Plate 150 x 280 mm, neigbar von -10° bis 90°. .

This car window mount is preferably used with a tilt head. Mounting plate 80x100 mm. .

If you are looking for an easy to use, compact tripod for taking pictures from your car, the Berlebach car window mount with bean bag is the ideal combination. A classic bean bag tripod is combined with a car window mount and supplemented by a panorama function. For mounting, the tripod, just like a normal car window mount, is simply put on the partially lowered side window and fixed there with the help of the clamping lever. The platform of the tripod can be swivelled vertically by -21°-0- 90° and the respective position can be adjusted via the lateral clamping lever. The camera is then placed directly on the bean bag, which is attached in three places to the upper platform of the tripod with Velcro tape. Larger optics can be attached to the bean bag with a Velcro tape. Easy turning and swivelling and the secure hold on the bean bag allow the photographer to quickly align his camera. For safe and easy photography from the car, no accessories other than the car window mount with bean bag are required. The bean bag can be easily separated from the tripod base via the three Velcro connections and can also be used separately. Vertical swivel range -21°-0- 90° Dimensions: LxWxH 170x210x160 Weight with bean bag 1.36 kg, without bean bag 0.86 kg

- small and light azimuthal mount for binoculars, scopes teleskopes and cameras - the friction control can be tuned with easy to grasp knobs for both axes - incl. one Dovetail Clamp. - on the other side is thr possibility to connect a second Dovetail Clmap, Counterbalance Bar or a quick release coupling for a camera/ spotting scope - thread size 3/8", other on request - high 120 mm /4.7" - width 175 mm /6.9" - diameter on the tripodside 60 mm /2.3" - load capacity 8 kg (max. 12 Nm) with load on one side and 20 kg with load on both sides

- small and light azimuthal mount for binoculars, scopes teleskopes and cameras - the friction control can be tuned with easy to grasp knobs for both axes - incl. one Dovetail Clamp with shoe - on the other side is thr possibility to connect a second Dovetail Clmap, Counterbalance Bar or a quick release coupling for a camera/ spotting scope - thread size 3/8", other on request - high 120 mm /4.7" - width 175 mm /6.9" - diameter on the tripodside 60 mm /2.3" - load capacity 8 kg (12 Nm) on one side and 20 kg both sides

- small and light azimuthal mount for binoculars, scopes teleskopes and cameras - the friction control can be tuned with easy to grasp knobs for both axes - incl. one Dovetail Clamp. - on the other side is thr possibility to connect a second Dovetail Clmap, Counterbalance Bar or a quick release coupling for a camera/ spotting scope - thread size 3/8", other on request - high 107 mm /4.2" - width 135 mm /5.3" - diameter on the tripodside 60 mm /2.3" - load capacity 5 kg (max. 7 Nm) with load on one side and 20 kg with load on both sides

Easy support for Photo-boxes, simple to connect, screws included.

For our tripods UNI and PLANET for the telescope mount ZWO AM 5 If you use the tripod without pier extension you need this basis plate. The collar with the recesses provides protection against twisting and also offers more freedom on the control buttons for the azimuth setting when using our PLANET tripod.

Are pulled over the stainless-steel tips and fixed by means of the rubber.

Tripod spreader for Report 2022HL, minimum Metal

For UNI- tripods. - The floor stay is ideal for holding the tripod legs in place when spread at extreme angles on smooth or sensitive flooring. Extension of the bracing arms is infinitely variable. Clear scale marks indicate the extension length. Rubber pads are provided for non-slip support. The centre piece also allows mounting of a camera or an accessories tray. - Mounting thread: 1/4"