TS Optics

The 40 mm f/3.3 Triplet ED guiding scope with carbon tube offers very good optics and fits all common finder shoes.

• Triplet ED objective with 40 mm aperture and 132 mm focal length
• T2 and 1.25" connection
• Adjustment range of the focus: 15 mm
• Focus point 10mm behind the T2 thread or 20mm behind the inner T2 thread if the T2 extension is removed
• Fine adjustment by twisting with precise fixation by counter ring
• Stable metal bracket with dovetail bar, suitable for finder shoes from TS-Optics, Skywatcher, GSO and many more.
• Carbon tube
• Multi-coating on triplet objective for maximum transmission
• Especially well suited for guiding cameras with small pixels and high resolution

Adapter for EQ6, EQ-5, H-EQ5, CGEM ... mounts to the TS Tri-Pier pier stand and also for DIY.

• The adapter fits to Skywatcher mounts EQ3, EQ5, H-EQ5, EQ6, AZ-EQ6 and EQ6-R mounts.
• The adapter fits Celestron CGEM mounts.
• The adapter fits Bresser / Meade Exos-2 mounts and similar
• Matching M10 and M12 stainless steel counter screws and two mandrels for azimuth adjustment of the mount are included.
• Three different distances from the center to the azimuth adjustment are available
• Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.
• Diameter at the top is 115 mm

The adapter allows the connection of ball heads, tilt heads and AZ mounts with the 3/8" photo thread to the TS Tri-Pier pier stand and also for DIY.

• The adapter has a 3/8" photo thread (male thread ) on the top side.
• Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.

This compact guiding scope is an elegant and comfortable solution for guiding telescopes of up to approx. 1000 mm focal length.

• 50 mm aperture, 180 mm focal length
• Generous backfocus of 36mm from the inner focuser position - allows connection of all common cameras, autoguiders and eyepieces
• Adjustment range of the sliding focuser is 41mm
• connection on the camera side is 1.25" socket and T2 male thread
• If you unscrew the 1,25" adapter of the sliding focuser, a T2 female thread is available for self-adaptations.
• Fits to all standard finder bases from Skywatcher, Vixen, GSO, Celestron, ... - replaces the original finder
• Solid construction completely of metal - excellently suited for long-time exposures - even with heavy guiding cameras, nothing bends
• 620 g weight

Adapter for iOptron mounts to the TS Tri-Pier pier tripod and also for do-it-yourself.

• The adapter fits to iOptron mounts CEM70(G), CEM60(G), CEM40(G), CEM45(G), CEM26 and CEM28
• Matching counter screws and the pin for the AZ adjustment are included
• Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.
• Diameter at the top is 149 mm

• 3/8" photo thread at the top - suitable for all mounts with a flat bottom and 3/8" internal thread
• Also suitable for ball heads and tilt heads
• Suitable for piers with an inner diameter of 93.5 mm, such as the TSPIER piers
• Distance of the three fastening screws on the pier from the stop edge 16.5 mm
• With 3/8" photo screw
• Made of aluminium - black anodized

• Suitable for Skywatcher EQ6 and Celestron CGEM mounts
• Suitable for piers with an inner diameter of 93.5 mm, such as the TSPIER piers
• Distance of the three mounting screws on the pier from the stop edge 16.5 mm
• With fastening screw for the mount and the pin for azimuth fine adjustment
• Made of aluminium - black anodized
  

• Suitable for Skywatcher mounts EQ3, EQM35, EQ5, AZ-EQ5, HEQ5
• Suitable for Vixen GP mounts
• Suitable for Bresser Mon2 mounts
• Suitable for piers with the inner diameter of 93.5 mm
• Outer diameter of the support plate 100.5 mm
• Distance of the three fixing screws on the column from the stop edge 16.5 mm
• With fixing screw for the mounting and the spigot for the azimuth fine adjustment
• Solid aluminium

Adapter for Vixen mounts to the TS Tri-Pier pier stand and also for DIY.

• The adapter fits many Vixen mounts with the GP type tripod connection.
• Matching stainless steel counter screws and two pins for azimuth adjustment of the mount are included.
• Two different distances from the center to the azimuth adjustment are available.
• Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.

Holder for Newtonian secondary mirrors for telescope self-construction or improving Newtonian reflectors.

• for secondary mirrors 50 mm diameter - minor axis
• Inner thread at the base: M6 - central
• Distance from the base to the beginning of the 45° slant: 47 mm
• Flat contact surface for bonding the secondary mirror with exact 45° incline