TS Optics

Ritchey Chretien astrograph with 250 mm aperture with corrector and fast focal ratio of f/6.4 for astrophotography with sensors up to full frame format

• Aperture 250 mm / focal length 1625.5 mm / focal ratio f/6.4
• High quality 3" rack and pinion focuser with internal corrector and 360° rotation - everything is screwed together
• Primary mirror and secondary mirror made of quartz glass for stable focus position
• 94% enhanced reflectivity on primary mirror and secondary mirror for a bright image and short exposure times
• Carbon truss tube with high quality workmanship for optimal stiffness and focus stability
• Working distances 55 mm from M48x0.75 thread (adapter included) and 73.7 mm from M68x1 thread for individual adaptations
• Two Losmandy style dovetail bars for adapting to mounts and attaching optional accessories such as guiding scope
• The focuser can be tilted independently from the primary mirror (tilting)
• Ventilation of the primary mirror accelerates cooling down
• Extensive accessories like 2" connection for observation, extension rings between focuser and telescope, finder shoe on the tube ...
• Each RC is checked and optimized by TS/APM before shipping. It is provided with a checklist.

TS Premium 80 mm f/7 ED apo refractor telescope with improved image quality due to ED objective and 2" rack & pinion focuser for astrophotography and observation

• TSED80F7: Special offer for a limited time. The telescopes are new and have full warranty.
• Premium 80 mm f/7.0 ED 2-element objective with improved chromatic correction and good light sensitivity - glas from Ohara (Japan)
• Focal length 560 mm - focal ratio f/7
• Outstanding mechanical construction with CNC tube, CNC tube rings and temperature compensated, adjustable lens mounting
• 2" dual-speed rack & pinion focuser - one of the best focusers of the TS product range for high loads
• 2" and 1.25" connection, and M54x0.75 inner thread are available for adaptations
• Very good image field correctors and also reducers for astrophotography are optionally available
• Dovetail GP/EQ5 style is included
• Finder shoe for finder scopes and small guidescopes is included

The TS collimating telescope has built-in illumination with rechargeable battery and USB-C charging port and allows precise collimation of Ritchey-Chrétien, Cassegrain and DK telescopes as well as refractors.

• simple adaptation with M48 and T2 thread 
• Two-stage integrated illumination 
• Integrated rechargeable battery for over 20 hours operating time 
• USB-C charging connection 
• Can be used with alignment laser 
• Connection of a camera possible 
• Two eyepieces included in the scope of delivery 
• Adapters to M90 and M117 available suitable for RC, Cassegrain and Dall-Kirkham telescopes as well as refractors

Notes: The secondary mirror must have a center mark. Adjustment laser and camera are not included in the scope of delivery.

The T2i-M28i TS adapter is only 10 mm long and allows eyepieces to be quickly adapted to the T2 external thread.

• Connection at telescope end: T2 (M42x0.75) female thread - widely used or easy to fit
• Eyepiece side mount: M28x0.6 internal thread - on some eyepieces the 1.25" filter thread is also used to connect to the barrel.
• The 10mm length saves valuable optical path
• The second image shows the use of the adapter between ORIR12 and TSOAG27 (eyepiece, illumination and off-axis guide not included).

• Fixation with three M4 grub screws
• For reproducible focus position of 3" correctors on focusers with 3" clamping
• Simply slide over the 3" sleeve of the corrector and clamp

• Telescope connection: female M117x1 thread with 360° rotation
• Can also be attached to refractors via special adapter
• Connection on the eyepiece side is 2" and 1.25"
• M82x1 male thread, M77x1 female thread, M74x1 male thread and M69x1 female thread for screw adaptations
• Drawtube travel is 50 mm
• Bearing via stainless steel rail with ball bearings
• Adjustment via toothed rack - rack-and-pinion principle
• Suitable for EAF motorized focus without additional adapter

TS-Optics Adaptor with female T2 thread and male M48x0,75 filter thread

The adapter extends a male T2 thread to M48x0.75 (2") filter thread without increasing the length.

• Female thread: continuous T2 - M42x0.75
• Male thread: continuous 2" filter thread - M48x0.75
• Length: 4 mm - the mechanical length is optically not effective, as the adapter is completely sunken in the connection adapter

TS-Optics 155mm f/8 FPL55 Triplet APO lens in mount - with certificate

High performance Triplet APO lens in mount with accurate color rendering - ideal for telescope do-it-yourself.

• Aperture 155 mm
• Focal length 1240 mm
• Focal ratio f/8 
• FPL55 Triplet design with accurate color rendering Multi-coating on each glass-air surface Delivery with serial number and individual certificate 
• Connection thread on telescope side: M175x1 male thread

TS-Optics Triplet APO Objective 130 mm f/7 - lens in cell with certificate

Powerful 130 mm APO objective - ideal for a self-made apo or astrograph.

• Aperture: 130 mm 
• Focal length: 910 mm 
• Focal ratio: f/7
• Air spaced 130 mm triplet lens with Ohara FPL53 element 
• With certificate from the factory

TS-Optics 106 mm f 700 mm FCD100 Triplet Apo Lens with Mount

Powerful APO lens with mount - ideal for telescope DIY.

• Aperture 106 mm
• focal length 700 mm 
• Focal ratio: 1:6.6 
• Multi-coated 3-element lens with FCD100 APO element (similar to FPL53) from Hoya (Japan) for a color-pure image Lens and mount are made in Japan
  
  Note: Photo shows similar product

TS-Optics Triplet APO Objective 115mm f/6.95 - lens in cell

Powerful 115mm APO Objective - ideal for a self-made APO or Astrograph.

• Aperture: 115 mm 
• Focal length: 800 mm 
• Focal ratio: f/6.95 
• Triplet Apo Objective with two special glasses (Lanthanum glass and FPL51) - Ohara Japan - colour correction comparable with FPL53 triplet objective The air-spaced objective is adjustable mounted

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 1000 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 700 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 500 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The SMH-DEL smartphone holder allows astrophotography, animal photography and also photography of the microcosm with your smartphone.

•  Fits all eyepieces from 25 mm to 48 mm in diameter.
•  Holds all common smartphones from 55 mm to 100 mm wide
•  The camera can be brought exactly over the eyepiece in just a few steps
•  The smartphone is clamped gently, a protective layer of foam prevents scratches on the smartphone
•  The highlight - an extra 1/4" photo thread also allows the smartphone to be attached to photo tripods
•  The smartphone adapter is made of metal - stability and durability are therefore guaranteed
•  Suitable for astrophotography, wildlife photography, microscopy and much more, with the appropriate instrument (we will be happy to advise you)

Stunning astrophotos and extreme depth at a moderate time effort - this is what the PowerNewtonians from Teleskop Service stand for.

• Short exposure times at f/2.8 - perfect for DSLR cameras without cooling
•  Moderate exposure times when using narrowband filters
•  Very good field correction thanks to the ASA corrector/reducer
•  High mechanical stability due to the carbon tube
•  Total length of only 1100 mm, weight of 18 kg - can also be carried by affordable mounts
•  Back Focus 65 mm starting from the T2-thread - also suitable for OAG
•  Fully illuminated and corrected field for APS-C format sensors
•  The first image at left shows the very similar 10" model.
•  Made in Germany

• Suitable for Skywatcher mounts EQ3, EQM35, EQ5, AZ-EQ5, HEQ5
• Suitable for Vixen GP mounts
• Suitable for Bresser Mon2 mounts
• Suitable for piers with the inner diameter of 93.5 mm
• Outer diameter of the support plate 100.5 mm
• Distance of the three fixing screws on the column from the stop edge 16.5 mm
• With fixing screw for the mounting and the spigot for the azimuth fine adjustment
• Solid aluminium

• Suitable for Skywatcher EQ6 and Celestron CGEM mounts
• Suitable for piers with an inner diameter of 93.5 mm, such as the TSPIER piers
• Distance of the three mounting screws on the pier from the stop edge 16.5 mm
• With fastening screw for the mount and the pin for azimuth fine adjustment
• Made of aluminium - black anodized
  

• 3/8" photo thread at the top - suitable for all mounts with a flat bottom and 3/8" internal thread
• Also suitable for ball heads and tilt heads
• Suitable for piers with an inner diameter of 93.5 mm, such as the TSPIER piers
• Distance of the three fastening screws on the pier from the stop edge 16.5 mm
• With 3/8" photo screw
• Made of aluminium - black anodized

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 1200 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

Adapter for iOptron mounts to the TS Tri-Pier pier tripod and also for do-it-yourself.

• The adapter fits to iOptron mounts CEM70(G), CEM60(G), CEM40(G), CEM45(G), CEM26 and CEM28
• Matching counter screws and the pin for the AZ adjustment are included
• Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.
• Diameter at the top is 149 mm

TS 13 mm 100° extreme Wide Angle eyepiece for Moon, Planets but also for ultimate Deep Sky Observing.

• Ultimate xtreme Wide Angle eyepiece
• Focal Length 13 mm
• Giant 100° field of view
• High contrast and no internal reflexions
• Best multicoating we ever have seen
• Comfortable eye relief
• Rubber armoured grip surface
• Waterproof design
• 1.25" and 2" barrel - the 2" barrel is simply unscrewed

This compact telescope can be used very well as a guiding telescope. With the lockable helical focuser you can easily focus and secure the setting reliably.

• 60 mm aperture, 240 mm focal length
• 1.25" focuser with T2 thread allows connection of all common cameras, autoguiders and eyepieces
• Focusing with sliding tube (35mm) and fine adjustment with non-rotating helical focuser (10mm) - all clampable
• Fits all standard finder shoes from Skywatcher, Vixen, GSO, Celestron, etc.
• Solid construction completely made of metal - excellent for long time exposures - even with heavier guiding cameras nothing bends
• Weight approximately 900 g