TS Optics

The TS collimating telescope has built-in illumination with rechargeable battery and USB-C charging port and allows precise collimation of Ritchey-Chrétien, Cassegrain and DK telescopes as well as refractors.

• simple adaptation with M48 and T2 thread 
• Two-stage integrated illumination 
• Integrated rechargeable battery for over 20 hours operating time 
• USB-C charging connection 
• Can be used with alignment laser 
• Connection of a camera possible 
• Two eyepieces included in the scope of delivery 
• Adapters to M90 and M117 available suitable for RC, Cassegrain and Dall-Kirkham telescopes as well as refractors

Notes: The secondary mirror must have a center mark. Adjustment laser and camera are not included in the scope of delivery.

The T2i-M28i TS adapter is only 10 mm long and allows eyepieces to be quickly adapted to the T2 external thread.

• Connection at telescope end: T2 (M42x0.75) female thread - widely used or easy to fit
• Eyepiece side mount: M28x0.6 internal thread - on some eyepieces the 1.25" filter thread is also used to connect to the barrel.
• The 10mm length saves valuable optical path
• The second image shows the use of the adapter between ORIR12 and TSOAG27 (eyepiece, illumination and off-axis guide not included).

• Fixation with three M4 grub screws
• For reproducible focus position of 3" correctors on focusers with 3" clamping
• Simply slide over the 3" sleeve of the corrector and clamp

• Telescope connection: female M117x1 thread with 360° rotation
• Can also be attached to refractors via special adapter
• Connection on the eyepiece side is 2" and 1.25"
• M82x1 male thread, M77x1 female thread, M74x1 male thread and M69x1 female thread for screw adaptations
• Drawtube travel is 50 mm
• Bearing via stainless steel rail with ball bearings
• Adjustment via toothed rack - rack-and-pinion principle
• Suitable for EAF motorized focus without additional adapter

TS-Optics Adaptor with female T2 thread and male M48x0,75 filter thread

The adapter extends a male T2 thread to M48x0.75 (2") filter thread without increasing the length.

• Female thread: continuous T2 - M42x0.75
• Male thread: continuous 2" filter thread - M48x0.75
• Length: 4 mm - the mechanical length is optically not effective, as the adapter is completely sunken in the connection adapter

TS-Optics 155mm f/8 FPL55 Triplet APO lens in mount - with certificate

High performance Triplet APO lens in mount with accurate color rendering - ideal for telescope do-it-yourself.

• Aperture 155 mm
• Focal length 1240 mm
• Focal ratio f/8 
• FPL55 Triplet design with accurate color rendering Multi-coating on each glass-air surface Delivery with serial number and individual certificate 
• Connection thread on telescope side: M175x1 male thread

TS-Optics Triplet APO Objective 130 mm f/7 - lens in cell with certificate

Powerful 130 mm APO objective - ideal for a self-made apo or astrograph.

• Aperture: 130 mm 
• Focal length: 910 mm 
• Focal ratio: f/7
• Air spaced 130 mm triplet lens with Ohara FPL53 element 
• With certificate from the factory

TS-Optics 106 mm f 700 mm FCD100 Triplet Apo Lens with Mount

Powerful APO lens with mount - ideal for telescope DIY.

• Aperture 106 mm
• focal length 700 mm 
• Focal ratio: 1:6.6 
• Multi-coated 3-element lens with FCD100 APO element (similar to FPL53) from Hoya (Japan) for a color-pure image Lens and mount are made in Japan
  
  Note: Photo shows similar product

TS-Optics Triplet APO Objective 115mm f/6.95 - lens in cell

Powerful 115mm APO Objective - ideal for a self-made APO or Astrograph.

• Aperture: 115 mm 
• Focal length: 800 mm 
• Focal ratio: f/6.95 
• Triplet Apo Objective with two special glasses (Lanthanum glass and FPL51) - Ohara Japan - colour correction comparable with FPL53 triplet objective The air-spaced objective is adjustable mounted

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 1000 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 700 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 500 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The SMH-DEL smartphone holder allows astrophotography, animal photography and also photography of the microcosm with your smartphone.

•  Fits all eyepieces from 25 mm to 48 mm in diameter.
•  Holds all common smartphones from 55 mm to 100 mm wide
•  The camera can be brought exactly over the eyepiece in just a few steps
•  The smartphone is clamped gently, a protective layer of foam prevents scratches on the smartphone
•  The highlight - an extra 1/4" photo thread also allows the smartphone to be attached to photo tripods
•  The smartphone adapter is made of metal - stability and durability are therefore guaranteed
•  Suitable for astrophotography, wildlife photography, microscopy and much more, with the appropriate instrument (we will be happy to advise you)

Stunning astrophotos and extreme depth at a moderate time effort - this is what the PowerNewtonians from Teleskop Service stand for.

• Short exposure times at f/2.8 - perfect for DSLR cameras without cooling
•  Moderate exposure times when using narrowband filters
•  Very good field correction thanks to the ASA corrector/reducer
•  High mechanical stability due to the carbon tube
•  Total length of only 1100 mm, weight of 18 kg - can also be carried by affordable mounts
•  Back Focus 65 mm starting from the T2-thread - also suitable for OAG
•  Fully illuminated and corrected field for APS-C format sensors
•  The first image at left shows the very similar 10" model.
•  Made in Germany

• Suitable for Skywatcher mounts EQ3, EQM35, EQ5, AZ-EQ5, HEQ5
• Suitable for Vixen GP mounts
• Suitable for Bresser Mon2 mounts
• Suitable for piers with the inner diameter of 93.5 mm
• Outer diameter of the support plate 100.5 mm
• Distance of the three fixing screws on the column from the stop edge 16.5 mm
• With fixing screw for the mounting and the spigot for the azimuth fine adjustment
• Solid aluminium

• Suitable for Skywatcher EQ6 and Celestron CGEM mounts
• Suitable for piers with an inner diameter of 93.5 mm, such as the TSPIER piers
• Distance of the three mounting screws on the pier from the stop edge 16.5 mm
• With fastening screw for the mount and the pin for azimuth fine adjustment
• Made of aluminium - black anodized
  

• 3/8" photo thread at the top - suitable for all mounts with a flat bottom and 3/8" internal thread
• Also suitable for ball heads and tilt heads
• Suitable for piers with an inner diameter of 93.5 mm, such as the TSPIER piers
• Distance of the three fastening screws on the pier from the stop edge 16.5 mm
• With 3/8" photo screw
• Made of aluminium - black anodized

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 1200 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

Adapter for iOptron mounts to the TS Tri-Pier pier tripod and also for do-it-yourself.

• The adapter fits to iOptron mounts CEM70(G), CEM60(G), CEM40(G), CEM45(G), CEM26 and CEM28
• Matching counter screws and the pin for the AZ adjustment are included
• Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.
• Diameter at the top is 149 mm

TS 13 mm 100° extreme Wide Angle eyepiece for Moon, Planets but also for ultimate Deep Sky Observing.

• Ultimate xtreme Wide Angle eyepiece
• Focal Length 13 mm
• Giant 100° field of view
• High contrast and no internal reflexions
• Best multicoating we ever have seen
• Comfortable eye relief
• Rubber armoured grip surface
• Waterproof design
• 1.25" and 2" barrel - the 2" barrel is simply unscrewed

This compact telescope can be used very well as a guiding telescope. With the lockable helical focuser you can easily focus and secure the setting reliably.

• 60 mm aperture, 240 mm focal length
• 1.25" focuser with T2 thread allows connection of all common cameras, autoguiders and eyepieces
• Focusing with sliding tube (35mm) and fine adjustment with non-rotating helical focuser (10mm) - all clampable
• Fits all standard finder shoes from Skywatcher, Vixen, GSO, Celestron, etc.
• Solid construction completely made of metal - excellent for long time exposures - even with heavier guiding cameras nothing bends
• Weight approximately 900 g

The 40 mm f/3.3 Triplet ED guiding scope with carbon tube offers very good optics and fits all common finder shoes.

• Triplet ED objective with 40 mm aperture and 132 mm focal length
• T2 and 1.25" connection
• Adjustment range of the focus: 15 mm
• Focus point 10mm behind the T2 thread or 20mm behind the inner T2 thread if the T2 extension is removed
• Fine adjustment by twisting with precise fixation by counter ring
• Stable metal bracket with dovetail bar, suitable for finder shoes from TS-Optics, Skywatcher, GSO and many more.
• Carbon tube
• Multi-coating on triplet objective for maximum transmission
• Especially well suited for guiding cameras with small pixels and high resolution

Short adapter from 2" SC thread to T2 - length approx. 10 mm - for focal photography with Schmidt-Cassegrain telescopes.

• Telescope side connection: SC thread, female;
• Camera side connection: T2-thread (M42x0.75), male;
• Extremely short with only 10 mm length;
• Fits to all SC threads from Celestron, Meade, Sky-Watcher, Orion and to all construction types, like Schmidt-Cassegrain, Edge-HD, ACF;
• With this adapter and an optional T2 ring, you can attach your SLR directly to the telescope for doing focal photography.

The waterproof and airtight outdoor case and accessory case with foam inserts optimally protects cameras, optics and accessories from dust and shocks.

• Dimension outside 271 x 246 x 174 mm
• Dimension inside 233 x 178 x 155 mm
• With raster foam inserts for optimal fit
• Safety lock without danger for accidental opening
• Sturdy carrying handle for maximum load
• Eyelets for locking the case
• Pressure valve for equalizing the air pressure available
• Reliably keeps moisture out
• Maximum stability with only 1.46 kg weight
• The case is suitable for astro cameras, valuable eyepieces, filters or compact camera lenses, among other things.

The rack and pinion focuser is suitable for do-it-yourself construction or improvement of an 8" Newtonian telescope and also accepts correctors with 3" diameter.

• Suitable for telescope tubes with 230mm to 250mm diameter
• Including 360° rotation and tilting possibility
• 2" connection and auxiliary thread M82x1 (female) for adapting large correctors for astrophotography
• Micro-reduction for precise focusing
• The bearing of the extension tube is decoupled from the adjustment via gear drive (rack-and-pinion)

The rack and pinion focuser is suitable for do-it-yourself construction or improvement of a 10" Newtonian and also accepts correctors with 3" diameter.

• Suitable for telescope tubes with 230mm to 250mm diameter
• Including 360° rotation and tilting possibility
• 2" connection and auxiliary thread M82x1 (female) for adapting large correctors for astrophotography
• Micro-reduction for precise focusing
• The bearing of the extension tube is decoupled from the adjustment via gear drive (rack-and-pinion)

An ultimate and compact APO refractor for astrophotography and observation.

• Aperture 110 mm / focal length 528 mm / focal ratio f/4.8
• FCD100 triplet lens with f/6 - chromatic correction comparable to FPL53 triplet
• 4-element 0.8x corrector with M48 camera connection and working distance of 55 mm included - designed for this lens for highest field sharpness
• 2" filter thread and 360° rotation included
• 2" Visual-Back can be screwed to the focuser instead of the corrector for observation - working distance suitable for 1.25" and 2" accessories
• Delivery in high-quality carrying case
• Each apo is tested (cosmetics, optics and mechanics) at Teleskop-Service before shipment, the optics are collimated. The apo is shipped with a checklist.

• Aperture 203 mm
• Effective focal length 690 mm
• Focal ratio f/3.4
• Full correction up to 44 mm diameter with good illumination
• Carbon tube for good focus and mechanical stability
• 3" dual-speed RAP focuser with integrated corrector
• Working distance 55 mm from M48x0.75 thread with integrated connection for 2" filter
• Additional threads M54x0.75 and M68x1 available for individual adaptations
• Each TS Hypergraph203 is tested and optimized on our optical bench before storage
• Made in Germany!

• Aperture 254 mm
• Effective focal length 863 mm
• Focal ratio f/3.4
• Full correction up to 44 mm diameter with good illumination
• Carbon tube for good focus and mechanical stability
• 3" dual-speed RAP focuser with integrated corrector
• Working distance 55 mm from M48x0.75 thread with integrated connection for 2" filter
• Additional threads M54x0.75 and M68x1 available for individual adaptations
• Each TS Hypergraph254 is tested and optimized on our optical bench before storage
• Made in Germany!

Holder for Newtonian secondary mirrors for telescope self-construction or improving Newtonian reflectors.

• Diameter: 20 mm - suitable for secondary mirrors from 22 mm diameter - minor axis
• Inner thread at the base: M6 - central
• Distance from the base to the beginning of the 45° slant: 5 mm
• Flat contact surface for bonding the secondary mirror with exact 45° incline

Holder for Newtonian secondary mirrors for telescope self-construction or improving Newtonian reflectors.

• Diameter: 30 mm - suitable for secondary mirrors from 32 mm diameter - minor axis
• Inner thread at the base: M6 - central
• Distance from the base to the beginning of the 45° slant: 5 mm
• Flat contact surface for bonding the secondary mirror with exact 45° incline

Holder for Newtonian secondary mirrors for telescope self-construction or improving Newtonian reflectors.

• Diameter: 40 mm - suitable for secondary mirrors from 42 mm diameter - minor axis
• Inner thread at the base: M6 - central
• Distance from the base to the beginning of the 45° slant: 5 mm
• Flat contact surface for bonding the secondary mirror with exact 45° incline

Holder for Newtonian secondary mirrors for telescope self-construction or improving Newtonian reflectors.

• Diameter: 60 mm - suitable for secondary mirrors from 63 mm diameter - minor axis
• Inner thread at the base: M6 - central
• Distance from the base to the beginning of the 45° slant: 7 mm
• Flat contact surface for bonding the secondary mirror with exact 45° incline

Holder for Newtonian secondary mirrors for telescope self-construction or improving Newtonian reflectors.

• Diameter: 65 mm - suitable for secondary mirrors from 70 mm diameter - minor axis
• Inner thread at the base: M6 - central
• Distance from the base to the beginning of the 45° slant: 45 mm
• Flat contact surface for bonding the secondary mirror with exact 45° incline

Holder for Newtonian secondary mirrors for telescope self-construction or improving Newtonian reflectors.

• for secondary mirrors 50 mm diameter - minor axis
• Inner thread at the base: M6 - central
• Distance from the base to the beginning of the 45° slant: 47 mm
• Flat contact surface for bonding the secondary mirror with exact 45° incline

The TS 102 mm f11 SDP Apo offers excellent chromatic aberration correction by pairing FPL53 with additional special glass

• Very good correction of chromatic aberrations by a 2-element APO lens with FPL53 from Ohara and an additional special glass
• Very good correction also in the violet color range, where faster SD-Apos give in a bit
• Even at 250-300x sharpness is maintained
• Adjustable lens mount
• Improved 2.5" rack and pinion RAP focuser with photo thread, 2" and 1.25" adaption
• Retractable dew shield for better transport and optimal protection against stray light
• Deluxe finder holder for adapting finder telescopes
• Binoviewers can be used without path compensation
• CNC tube rings and EQ5 style dovetail bar included
• With only 4.6 kg the ED is well supported by mounts like the Skywatcher EQ5
• Each TS Apo is individually tested before shipping (optics, mechanics, cosmetics), a checklist is attached.

This adapter is necessary for connecting the full-frame 3" corrector from TS to the 2.5" focuser with M63x1 female thread.

• Thread at the telescope side: M63x1 thread (male)
• Thread at camera side: M92x1 (female)
• For focuser: 2,5" R&P focuser from TS and 2,5" Feather Touch focuser from Starlight Instruments

The 3" Photoline 0.8x reducer and corrector is optimized for full frame cameras and suitable for all apos from 102mm aperture - with integrated fine tuning for optimal working distance.

• Optimally suited for large sensors (full frame and larger)
• Connection thread on the telescope side is M92x1 male thread - adapters for focusers from 3" are available
• The distance from the corrector to the camera is precisely adjustable with the camera connected for optimal field sharpness - Position is fixable
• Triplet design with improved color correction - Special glass from Ohara (Japan)
• Camera connection via M48x0.75 adapter with integrated female thread for 2" filter
• Additional M54x0.75 thread for larger camera sensors - prevents vignetting due to M48
• High-quality multi-coating, internal blackening and anti-reflective thread prevent reflections and ghost images
• Dust caps for screwing on the M92 thread and M48 thread are included in the scope of delivery

The corrector and focal reducer is designed for the TSCFAPO130 and allows astrophotography through this telescope.

• Suitable for the TS 130 mm f/7 CF Apo and similar telescopes
• Also Suitable for the TS APO130F7-DEL with the 3.7" RAP focuser
• The focal length is reduced to 80% and the focal ratio is improved - f/7 becomes f/5.6
• The corrector is designed for cameras up to full frame format
• Connection at the telescope side via M92x1 thread (suitable for TSCFAPO130)
• Connection at the camera side via M48x0.75 photo thread
• Intermediate thread M72x1 for individual adaptations
• Working distance is 55 mm from M48 thread, ideal for DSLR, system cameras and astro cameras
• 2" filter thread for connection of nebula filters is available

The adapter allows for example the connection of correctors with M63x1 thread to telescopes with M54x0.75 internal thread on the camera side

• Thread Extraction side: M54x0.75 external thread
• Thread camera side: M63x1 female thread - suitable for many correctors with the corresponding male thread

The digiscoping adapter BW-T2 allows attaching of cameras to BW spotting scopes from TS Optics.

• Suitable for, amongst others, all older TS BW spotting scopes, and also to all eyepieces with 37 mm connection thread
• Easy adaption - instead of the eyecup, the adapter is screwed to the eyepiece
• Suitable for SLR, mirrorless system cameras and also cameras with fixed lenses
• Connection adapters can be found in the "recommended accessories" section below

• Connection telescope side: M74x1 female thread
• Connection camera side: M54.075 female thread
• Length of the adapter: 11 mm
• Ideal for connecting M54 rotation adapters or reducers with M54x0.75 male thread to Skywatcher ESPRIT telescopes

The fast 110 mm ED APO offers good chromatic correction through two special glasses, it is designed for observation and astrophotography.

• Aperture 110 mm / focal length 660 mm / focal ratio f/6
• 2-element APO objective with FPL51 and Lanthanum glass from Ohara-Optics
• Full multicoating for high contrast
• 2.7" RAP focuser with ball bearing, 360° rotation and micro reduction
• M74x1 female thread for screw adaptions
• CNC tube rings - aluminium tube - retractable dew shield
• Aluminium carrying case
• Made in Taiwan

The TS 110 mm ED with 770 mm focal length is a transportable telescope for astrophotography and for observing with good color correction.

• Aperture 110 mm / focal length 770 mm / focal ratio f/7
• ED Dublet objective with glass from Ohara (Japan)
• Good correction of color error by ED element up to magnifications around 220x
• Stable 2.5" RAP focuser with 2", 1.25" ring clamp and auxiliary thread for screw adaptions
  Dual-speeed and 360° rotation of the focuser - important for astrophotography
• 0.8x reducer and corrector for astrophotography specially calculated for the TS 110 mm f/7 ED available
• Only 65 cm transport length and 6.8 kg weight - is well supported by a mount of the EQ5 class
• Optimized CNC tube with retractable dew cap and CNC clamps with M6 female thread connection
• Vixen level dovetail bar with photo tripod connection thread included

The 1.25" Premium Flat-Field eyepieces offer a wide and well-corrected field of view with comfortable viewing even for binocular observation.

• Focal length: 5.5 mm
• Barrel size: 1.25" with filter thread
• Apparent field of view: 60
• Eye relief: 16 mm
• Foldable rubber eyecup - also suitable for eyeglass wearers
• Full multicoating on each glass-air surface
• No safety groove - therefore no tilting possible

The 1.25" Premium Flat-Field eyepieces offer a wide and well-corrected field of view with comfortable viewing even for binocular observation.

• Focal length: 19mm
• Barrel size: 1.25" with filter thread
• Apparent field of view: 65°
• Eye relief: 16 mm
• Foldable rubber eyecup - also suitable for eyeglass wearers
• Full multicoating on each glass-air surface
• No safety groove - therefore no tilting possible