Sort by
Display
Adapt 1.25" filters to your T2 accessories, with just 10 mm optical path.
- Telescope side connection thread: female T2-thread (M42x0.75)
- Camera side connection thread: male T2-thread (M42x0.75)
- Optical path: 9 mm without lock ring or 10 mm with lock ring
- Inner thread: female thread M28.5x0.6 for mounting 1.25" filters
- Application example with TS IR cut photo filter No. 2
The short adapter enables the connection of adapters with M42x0.75 female thread to focusers and adapters with M68x1 internal thread.
- Thread telescope side: M68x1 external thread - length 3.7 mm
- Thread camera side: M42x0.75 T2 external thread - length 5 mm
- Additional female 2" filter thread on the telescope side, for connection of 2" mounted filters
- No effective optical length because the M68x1 external thread is completely countersunk in the focuser - a shorter adaptation is not possible
Self-centering T2 rotation and quick coupling for astrophotography
- Thread on the telescope side: T2 (M42x0.75) Internal thread
- Thread on the camera side: T2 (M42x0.75) External thread
- Only 5.5 mm short (without external thread) - ideal for short adaptations
- The adapter is self-centering, you remain on the optical axis.
- Practical clamping with knurled screws, also works with gloves
- Sturdy construction, we recommend the adapter for accessories up to approx. 1.5 kg
This mechanism compensates tilted focalplanes, focusers, accessories and camera sensors - unsharp corners are avoided.
- Connection via T2-thread
- Only 11 mm optical path from T2 female to T2 female
- T2 conversion adapter included - converts the T2 female to a T2 male thread
- Stable metal design
- Easy adjustment without tools
Variable projection adapter for planetary and lunar photography - accomodates 1.25" eyepieces
- change the magnification by extending the adapter
- 1.25" connection to telescope
- accomodates 1.25" eyepieces up to 35 mm housing diameter
- T2 connector at camera side (T2 rings are optionall) for your DSLR camera
- two adapters in one - a 1.25" prime focus adapter and a variable eyepiece holder for eyepiece projection
With this adapter, you can attach 1.25" eyepieces to to the T2-system
- Telescope side connection: T2 (M42x0.75 mm)
- Eyepiece side connectin: 1.25" receptacle
- Solid locking with knurled screw
The T2 adapter turns a T2 female thread into a T2 male thread and provides a clean stop
- With this adapter you can connect two adapters with T2 female thread.
- Two T2 (M42x0.75) male threads with 3.5 mm length each
- Optically effective height only 2 mm - this is the thickness of the counter ring
- Free passage 37.5 mm - maximum possible clear aperture with T2