Accessories
- Home /
- APM Products /
- Accessories
Accessories for Telescopes
As diverse as astronomy is, as diverse are the accessories for telescopes and mounts. Whether for visual observation a prism or a Barlow lens, adapters and corrective optics for cameras - here you will find all the necessary "small parts" to set up and adjust your dream system.
Solid and extremely stable transport case for all 70mm Binos from APM.
295.00 €
Estimated delivery time : 4-8 weeks (valid for new orders)
Solid and extremely stable transport case for all 82mm Binos 45° from APM.
345.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Solid and extremely stable transport case for all 82mm Binos 90° from APM.
345.00 €
Estimated delivery time : 4-8 weeks (valid for new orders)
Adjusting flange for M63 reducer
79.00 €
Estimated delivery time : 1-4 days (valid for new orders)
APM-Riccardi Adjustment Flange M82
79.00 €
Estimated delivery time : 1-4 days (valid for new orders)
APM Q-Lock 2" eyepiece adapter with M48 ID Thread
Item condition: new and original packed
Item condition: new and original packed
59.00 €
Estimated delivery time : 2-3 days (valid for new orders)
APM-Q-Lock 2" adapter with M68 ID Thread
Item condition: new and original packed
Wichtiger Hinweis zur Mehrwertsteuer:
Dieses Angebot unterliegt mit Ausnahme der Versandkosten gemäß § 25a UStG der Differenzbesteuerung, weshalb auf den angebotenen Artikel keine Umsatzsteuer erhoben und ausgewiesen wird.
Item condition: new and original packed
Wichtiger Hinweis zur Mehrwertsteuer:
Dieses Angebot unterliegt mit Ausnahme der Versandkosten gemäß § 25a UStG der Differenzbesteuerung, weshalb auf den angebotenen Artikel keine Umsatzsteuer erhoben und ausgewiesen wird.
59.00 €
Estimated delivery time : 1-2 days (valid for new orders)
Rowan Saddle with Losmandy/Vixen DV profile
Item condition: new and original packed
Item condition: new and original packed
339.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Orion tube rings - aluminium - for tubes with D=100 mm Stable tube mounting rings with hinge The rings have a flat support surface on both sides. At the base of the rings there is an M6 female thread for attachment to a dovetail bar or to the top plate of the mount. On the opposite side of one ring you will find a female thread (1/4" photo thread), on the one of the other a male photo thread with counter ring for attaching a camera. The rings have a felt lining to protect the telescope tube.
Item condition: new, but not original packed
Item condition: new, but not original packed
47.90 €
Estimated delivery time : 2-3 days (valid for new orders)
Glas FK61 (similar to Ohara FPL51), has blackenededges, a measured transmission von over 99% from 400 nm to 700 nm, optimized for F/4 Newtonian-Telescopes. The barlow has a negative focal length of - 62.9 mm and a working backfocuse of 105 mm from center last lens to focuse ( eyepiece field stop). You will need now a 1.25" eyepiece holer 104 mm long
Item condition: new and original packed
Item condition: new and original packed
125.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The Tele Vue PMT-5126 4-element 5x Barlow lens offers a unique imaging quality Extension factor 5x 1.25" barrel with filter thread 4-element lens design for highest sharpness on the axis and in the field Sharp edge image even with fast telescopes The extension factor is retained even if the working distance is changed. Multi-coating on each glass-air surface for a bright image and high contrast Ideal for astrophotography when good sharpness is required throughout the field Is often used for H-Alpha telescopes to get the optimal aperture ratio Adapter and eyepieces are gently and firmly clamped by a compression ring
349.00 €
Estimated delivery time : 1-2 days (valid for new orders)
