Accessories
- Home /
- Accessories
Telescope accessories
Optec Adapter to T2 for the Flattener and Reducer.
42.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Optec NextGen Reducer for Telescopes with Field Correction 0.7x with 18 mm field.
452.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Optec Lepus HD Telecompressor for Celestron Edge HD 11.
390.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Optec Lepus HD Telecompressor for Celestron Edge HD 14.
404.00 €
Estimated delivery time : 1-4 weeks (valid for new orders)
Optec Lepus HD Telecompressor for Celestron Edge HD 8.
398.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Optec Lepus HD Telecompressor for Celestron Edge HD 9.25.
382.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Optec Lepus Telecompressor for Meade ACF.
309.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Optec TCF-S motorized Focuser 2" with Temperature Compensation.
999.00 €
Estimated delivery time : 1-4 days (valid for new orders)
Optec TCF-S3 motorized Focuser 3" with Temperature Compensation.
2497.00 €
Estimated delivery time : 1-4 days (valid for new orders)
The external motor controller (XMC) was designed to expand the focus capabilities of the "Ultimate Powerbox v2" (supports a 2nd focus controller) and adds focus functionality to the "Pocket Powerbox Advance".
- Works with bipolar or unpolar stepper motors
- Full, half, 1/4 and 1/8 step (microstepping)
- Large range of supported stepper motors
- Connector for environmental sensor
- Protected against undervoltage, overcurrent and overtemperature
- Made especially for Ultimate Powerbox v2 and Pocket Powerbox Advance
189.00 €
Estimated delivery time : 1-4 days (valid for new orders)
This hand controller allows precise manual focus, vibration free!
- Focusing with a rotary knob, thus intuitive
- Two speeds, slow precision mode is active if the knob is pressed inside
Speed indicators - Standard network cable with RJ45 plugs for connection
- Can work simultaneously with the PC operation
76.00 €
Estimated delivery time : 1-4 days (valid for new orders)
This geared stepper motor has 0.0625° steps, 60 Ncm torque and little backlash, so you can focus your telescope fast and accurately with it - even with heavy imaging equipment.
- Useful resolution of 0.0625° (3.75 arc min) per step
- High torque for handling higher loads
- Low backlash making backlash compensation easier
- RJ45 socket allows using standard network cable for connecting to PegasusAstro´s Dual Motor Focus Controller
- Universal L Shaped Bracket allows mechanical connection to many focusers
- Supplied couplers allow mechanical connection to many focusing shafts
139.00 €
Estimated delivery time : 1 week (valid for new orders)
