Berlebach

- Length in cm: 10/50 - Ø 25 mm

- Length in cm: 50 - Ø 25 mm - base plate Ø 68 mm

- Length: 50 cm

FOR TRIPODS REPORT The module insert 0 is the simplest and lowest-price tripod variant. It is equipped with a stationary fastening screw. In combination with Berlebach tripod heads, it is usable for a wide variety of applications. Perfect for work near the ground. The diameter of the supporting surface is 60 mm/2.4 in.

FOR TRIPODS REPORT The module insert 1 has got a spring supported fastening screw. It is suitable for the simple mounting of heavy heads or devices. The head is put on and is connected to the tripod by turning the screw. The diameter of the supporting surface is 60 mm/2.4 in.

FOR TRIPODS REPORT The module insert 2 is uquipped with a 50 cm long centre column with a diamter of 25 mm, made of precision wrough light-metal tubing, which allows a comfortable height adjustment. Each column is introduced accurately fitting in each tripod, in order to keep the tolerances as low as possible. the module insert 2 is also available with a firmly fixed rotating panorama plate, having the model designation 2/P. The support plate made of aluminium has got a diameter of 68 mm/2.7 in and is equipped with three safety screws, with which the mounted technology can be secured against unintentional release. The centre column can be used for work near the ground when it is turned over, or you use the centre column with a length of 10 cm.

FÜR STATIVE REPORT Der Moduleinsatz 2K ist mit einer 50 cm langen Kurbelmittelsäule (Durchmesser 25 mm) aus präzisionsgezogenem Leichtmetallrohr ausgestattet, so daß eine bequeme Höhenverstellung möglich ist. Der Auflageteller aus Aluminium hat einen Durchmesser von 68 mm und ist mit drei Sicherungsschrauben ausgestattet zur Sicherung der montierten Technik gegen unbeabsichtigtes Lösen. Befestigungsschraube: 3/8"

Für alle Stative REPORT im Modulsystem (Modell-Nr. mit 3 Ziffern) ? nicht kompatibel mit älteren Modellen (Modell-Nr. mit 4 Ziffern) Der Moduleinsatz 2 ist mit einer 50 cm langen Mittelsäule (Durchmesser 25 mm) aus präzisionsgezogenem Leichtmetallrohr ausgestattet, so daß eine bequeme Höhenverstellung möglich ist. Die Mittelsäule ist mit einem Panoramadrehteller versehen. Der Auflageteller aus Aluminium hat einen Durchmesser von 68 mm und ist mit drei Sicherungsschrauben ausgestattet zur Sicherung der montierten Technik gegen unbeabsichtigtes Lösen. Für bodennahes Arbeiten kann die Mittelsäule umgekehrt eingesetzt werden oder Sie verwenden eine geteilte oder die 10 cm kurze Mittelsäule.

FOR TRIPODS REPORT The module insert 3 has got a firmly installed levelling ball with diameter 55 mm/2.2 in and circular bubble. In this way, a quick and exact alignment of the tripod is possible. The swivel range is 30° in all directions. The supporting surface is 55 mm/2,2 in. The camera or tilt head fixation is effected by means of a spring supported tightening spindle. This module insert is particulary recommanded for heavy equipment, because one can also work with the integrated ball without an additional tilt head in some cases. The ocjective or the camera respectively is fixed directly onto the tripod. This is the most stable and most secure way to mount your camera, because there is only one junction between tripod and camera. The module insert 3 is also available with a firmly fixed rotating panorama plate, having the module designation 3/P.

Module insert with ball and Quick-Release-Choupling mod. 110

Module insert with ball and fixed Quick-Release-Coupling mod. 130 for all tripod REPORT

Module insert with ball and fixed Quick-Release-Coupling mod. 130 for all tripod REPORT

Module insert with ball and fixed Panorama Plate P101 for all tripod REPORT

Module insert with ball and fixed Panorama Plate P103 for all tripod REPORT

Für alle Stative REPORT im Modulsystem (Modell-Nr. mit 3 Ziffern) ? nicht kompatibel mit älteren Modellen (Modell-Nr. mit 4 Ziffern) Der Moduleinsatz 3 hat eine fest eingebaute Nivellierkugel (Durchmesser 55 mm) mit einem Schwenkbereich von 30°. Durch die eingebaute Dosenlibelle ist ein schnelles und genaues Ausrichten des Stativs möglich. Die Kugel ist mit einem Panoramadrehteller versehen."

FOR TRIPODS REPORT The module insert 4 unites the modules 2 and 3, because here a centre column is integrated in a levelling ball. Here too the 50 cm long centre column with diameter 25 mm/1 in is made of precision wrought light-metal tubing, so that a comfortable height adjustment is possible. The columns are introduced accurately fitting into the tripods, in order to keep the tolerances as low as possible. The module insert 4 as also available with a firmly fixed rotating panorama plate, having the module designation 4/P.

Moduleinsatz 4K mit Kurbelsäule (Ø 25 mm) und Kugel für alle Stative REPORT. Länge der Säule: 50 cm Verstellweg: 39 cm Befestigungsgewinde: 3/8"

Für alle Stative REPORT im Modulsystem (Modell-Nr. mit 3 Ziffern) ? nicht kompatibel mit älteren Modellen (Modell-Nr. mit 4 Ziffern) Der Moduleinsatz 4 besteht aus einer fest eingebauten Nivellierkugel (Durchmesser 55 mm) mit einem Schwenkbereich von 30° und einer Mittelsäule 50 cm lang. Durch die eingebaute Dosenlibelle ist ein schnelles und genaues Ausrichten und mit der Mittelsäule eine bequeme Hohenverstellung des Stativs möglich. Der Auflageteller aus Aluminium mit Panoramadrehung hat einen Durchmesser von 68 mm und ist mit drei Sicherungsschrauben ausgestattet zur Sicherung der montierten Technik gegen unbeabsichtigtes Lösen. Für bodennahes Arbeiten kann die Mittelsäule umgekehrt eingesetzt werden oder Sie verwenden eine geteilte oder die 10 cm kurze Mittelsäule.

The module insert 5/520 has a 2-Way-Tilt-Head. In this way, an unsurpassed stability is reached, since the tilt head is firmly connected to the module insert.

The module insert 5/520 Video has a 2-Way-Tilt-Head. In this way, an unsurpassed stability is reached, since the tilt head is firmly connected to the module insert.

The module insert 6 has got a half-shell with a diamter of 75 mm/3 in for the direct insertion of professional video tilt heads or of a levelling unit # 51010 (see accessory)

Der Moduleinsatz 7 ist einsetzbar in alle Stative Report. Damit können Sie Ihr Fotostativ auch für eine astronomische Montierungen nutzen. Bitte wählen Sie aus für welche Montierung Sie das Modul benötigen.

Moduleinsatz mit Kurbelsäule Ø 40 mm für Stative REPORT Länge der Kurbelsäule: 50 cm Befestigungsgewinde: 3/8"

Clamp Element for attachment to the tripod legs of the system REPORT and Mini-Tripods. Easy and quick installation with just one clamping lever (no screwing required). You are able to screw directly a compact camera or umbrella. The angle for levelling is 35°. Diameter of the plate: 30 mm Load capacity: 4 kg

Clamp Element for attachment to the tripod legs of the system UNI and PLANET. Easy and quick installation with just one clamping lever (no screwing required). You are able to screw directly a compact camera or umbrella. The angle for levelling is 35°. Diameter of the plate: 30 mm Load capacity: 4 kg

Clamp Element for attachment to the tripod legs of the system REPORT and Mini-Tripods. Easy and quick installation with just one clamping lever (no screwing required). You are able to screw directly a compact camera, ball- head or the plate # 320517. The angle for levelling is 35°. Diameter of the plate: 30 mm Load capacity: 4 kg

Clamp Element for attachment to the tripod legs of the system UNI and PLANET. Easy and quick installation with just one clamping lever (no screwing required). You are able to screw directly a compact camera, ball- head or the plate # 320517 or a tablet. The angle for levelling is 35°. Diameter of the plate: 68 mm screw bolt: 3/8" Load capacity: 4 kg

All in One! The complete solution for the panoramic photography. Fold, swivel, take photos. The folding and swivelling elbow is the newest innovation by Berlebach. A product which convinces in torsional stiffness and resilience. It excels in compactness and with the fact that it is built up within seconds. All in One! The complete solution for the panoramic photography. Fold, swivel, take photos. The folding and swivelling elbow is the newest innovation by Berlebach. A product which convinces in torsional stiffness and resilience. It excels in compactness and with the fact that it is built up within seconds. Since it is a Multi-Row panorama head, spherical panoramas are no problem for the MR 190. The horizontal plane (X-axis) is characterized by a functional scale which simplifies the alignment of the camera. The vertical plane is aligned at 90° by a snap-in element when the device is tilted up, and is clamped backlash-free via a wing nut. A 15° snap-in stage had been designed for the adjustment of the nodal rail. A big hand wheel allows with little rotating movements an exact positioning and fixation at the same time, whereat also the safety of your equipments had been considered and a hasty unintended tilting is prevented. The camera connection is constituted by the coupling model 110, which can be retained via a coin slot screw and moreover can be shifted by 90°. When you loosen this screw, it is possible to adjust the Z-axis, which must be adapted objective-specific in order to determine the nodal point. The small number of operating elements provides clearness and contributes to intuitive usage. - vertical 15° scaling - Camera connection with quick-release coupling model 110 - Notches for saving weight - Scaling for aligning the camera on the X-Axis - ultra-stable - Exact fixation of the vertical axis - Large adjustment ranges (also suitable for full format with large objectives) - Z-axis with adjustment range of 105 mm / 4.1 inch - Load capacity: 5,00 kg = 11 lb.

- Angels of tilt up to 33° - Ball diameter 100 mm - Camera support plate dia. 75 mm - screw 3/8" - height 110 mm - Adjustable friction - Fits 85 mm and 70 mm diam. bowl sizes and 3/8" screw

Levelling Unit With Lock Screw (Diameter 100 mm)

Levelling Unit With Lock Screw (Diameter 75 mm)

Instead of the flat tripod connection with a diameter of 86 mm and 3/8" screw hole you can mount this levelling unit with 15°.

Instead of the flat tripod connection with a diameter of 86 mm and 3/8" screw hole you can mount this levelling unit with 15°.

The leveling foot allows for easy and precise fine-tuning of the tripod. This means that each mount can be perfectly leveled once set up. The large diameter of 98 mm prevents sinking into soft ground, providing good load-bearing capacity and additional stability. The thread has an adjustment range of 25 mm. It is attached to the tripod with a round rubber. The plate is made of aluminum, and the mount for the tripod leg is made of stainless steel. Price is for 3 pcs. [LINK=https://youtu.be/BzoMipxDZis]

Neigung 20° Höhe: 39 mm Auflagefläche: 55 mm Befestigungsschraube 3/8" belastbar bis 10 kg Drehmoment: 10 Nm Maße ohne Griff: 62 x 72 x 41 mm Maße mit Griff: 71 x 109 x 41 mm

levelling angle: 15° height: 39 mm / 1.4" supporting are Ø: 62 mm / 2.44" fastening screw: 3/8" max. load: 15 kg / 33 lbs torgue: 20 Nm / 14.75 ldf/ft size without handle: 95 x 90 x 36 mm / size with handle: 100 x 134 x 36 mm Our levelling plate N 75 is suitable for all tripods with no possibility for direct adjustment of a 2- or 3-way tilt head. Thanks to its high load capacity and a max. torque of 20 Nm, it is also suitable for large gimbal tilt heads. The fastening handle can be rotated freely. Consequently, it can always be mounted in such a way that it does not jut into the picture. This levelling plate is the ideal solution for all those who particularly appreciate small and light equipment which is extremely stable at the same time. In many cases, the camera can be directly fastened on the plate using a quick connector, what makes the use of large tilt heads unnecessary.

Our levelling plate N90 is suitable for all tripods that do not offer any possibility to align a 2-way or 3-way tilt head directly. Thanks to the high load-bearing capacity of the levelling plated N90 of 20 kg and a maximum torque of 40 Nm they are also suitable for big Gimbal tilt heads. Inclination: 15° Diameter: 77 mm Height: 55 mm Load capacity: 20 kg Thread: 3/8"

Azimuthal mount Spica-Omega The mount for large binoculars, double refractors, refractor telescopes as well as photo and video equipment with large focal lengths.

Panoramamodulsystem I Set 2x Panoramaplate (# 20297), 2x Quick-Release Coupling 150 (# 320265) Dove-tail angle bracket 117/157 with scaling (#320320) Panorama clamp angle 157 mm with scala (# 320323) levelbubble (# 320329) - Höhe: 240 mm

Lieferumfang: 2x Panoramaplatte (# 320297), 2x Schnellkupplung 150 (# 320265), Panoramawinkel 157/157 mm (# 320321), Panoramaschiene 157 mm (# 320323), Aufsteckwasserwaage (# 320329) Geeignete Kameras: DSLR mit Batteriepack und Profi-DSLR (z.B. Nikon D300-MB-D10, D700+MB-D10, D3; Canon EOS 50D+BG-E2, 5D Mark II + BG-E4, 1D Mark III, 1Ds Mark III) Geeignete Objektive: Fisheyer, Weitwinkelzoom Panoramawinkel mit Skalierung: Beite 157 mm, Höhe 157 mm Kameraaufnahmegewinde: 2x 1/4" Bodengewinde: 1/4" und 3/8" Höhe: 240 mm

Lieferumfang: 2x Panoramaplatte (Art.-Nr. 320297), 2x Schnellkupplung (Art.-Nr. 320265), Panoramawinkel 157/227 mm (Art.-Nr. 320322), Panoramaschiene 227 mm (Art.-Nr. 320324), Aufsteckwasserwaage (Art-Nr. 320329) Geeignete Kameras: DSLR mit Batteriepack und Profi-DSLR (z.B. Nikon D300 + MB-D10, D700 + MB-D10, D3; Canon EOS 50D + BG-E2, 5D Mark II + BG-E4, 1D Mark III, 1Ds Mark III) Geeignete Objektive: Weitwinkelzoom, Tele bis ca. 100 mm

- the detent is adjusted via a turnswitch and snaps in at an angle of 15°, 18° and 24° - an adjustment for a use without steps is available too - with quick-change (without quick-change-plate, you can order # 320281 additional) - with circular bubble - diameter 65 mm - height: 47 mm - bottom thread: 3/8" (a 1/4"thread socket is included)

- the detent is adjusted via a turnswitch and snaps in at an angle of 15° - an adjustment for a use without steps is available too - with quick-change (without quick-change-plate, you can order # 320281 additional) - with circular bubble - diameter 65 mm - height: 35 mm - bottom thread: 3/8" (a 1/4"thread socket is included)

- Adjustable scale factor - Integrated spirit level - max. load capacity in the middle 10 kg - Base thread 1/4" and 3/8" - Size: 62 x 70 x 18 mm

Panoramaplate for the tripod heads Albatros and Pegasus

Panorama clamp angle 157 mm with scala - length: 157 mm - with embedded rubber cord which prevents camera slipping - thread size: 2x 1/4"

Panorama clamp plate 227 mm with scala - length: 227 mm - with embedded rubber cord which prevents camera slipping - thread size: 2x 1/4"