Autoguider Systems
- Home /
- CMOS & CCD Cameras /
- Autoguider Systems
Guiding Systems
Modern technology makes astrophotography with long exposure times easy. Guiding systems are used to keep the object exactly on the sensor. Either as a autoguider on a guide scope or using an off-axis guider in the primary light path. You can find both systems here.
Automatisches Alignment ohne Aufsuchen von Referenzsternen mit höchster Genauigkeit - nun auch für Skywatcher GoTo-Montierungen.
- Mit diesem StarSense Modul können Sie den Alignment-Prozess (Ausrichtung am Nachthimmel) Ihrer Skywatcher Montierung automatisieren.
- StarSense übernimmt das komplette Alignment Ihrer Skywatcher Montierung, Sie können nach wenigen Minuten mit dem Beobachten beginnen.
- StarSense ersetzt den orginalen Skywatcher Handkontroller - Sie können Ihre Skywatcher GoTo-Montierung mit der bewährten Celestron Ansteuerung ausstatten.
- Das Kit besteht aus drei Teilen: StarSense Kamera mit Sucherbasis, StarSense Interface-Box und Celestron GoTo-Handcontroller
MGEN autoguider for your mount - stand-alone or with computer - experience astrophotography in a new way
- Stand Alone or PC app controlled
- Selflearning (A.I.) adaptive guiding or manual modes
- Easy to use: one button push guiding or manual control
- Improved sensitivity with realtime darkframe correction
- Multistar guiding for extra high subpixel precision
- Polar alignment using digital Scheiner method
- DSLR and CCD exposure control
- Various dithering modes available
- Arbitrary binning modes for increasing sensitivity
- USB powered (5 V), typical 240 ma / 1.2 W
- AUX port for additional equipment
This motorized off axis guider allows for remote focusing of the guiding camera with high precison.
- Specialized for remote operation
- No external controller needed
- One cable operation
- Stepper motor for precise focusing
- Adjustable prism height
- Connects to guiding cameras with T or C mount
- Completely illuminated field of view of the guiding camera
- 50 mm clear aperture, M54 connections
- Compatible with ASCOM focus drivers or standalone software
- Attaches to the Falcon Rotator without adaptors
Very easy to operate via ASCOM drivers or standalone software, it will make your life easier by automatically adjusting your camera field with precision.
- 6 kg payload, but only 0.7 kg weight
- M54 connections avoid vignetting of large sensors
- Comes with adaptors for 2" receptacles and M48 camera rings
- Needs only 19 mm back focus
- Controlled via USB 2.0, no proprietary cable needed
- Uses ASCOM 6 for control, INDI support will follow
- Aluminum design increases rigidity
